kernel.git/drivers/gpu/drm/msm/dp/dp_ctrl.c, branch linux-5.18.y

drm/msm/dp: force link training for display resolution change

2022-06-29T07:04:31Z

[ Upstream commit a6e2af64a79afa7f1b29375b5231e840a84bb845 ] Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state. However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel. This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function. Changes in v2: -- set force_link_train flag on DP only (is_edp == false) Changes in v3: -- revise commit text -- add Fixes tag Changes in v4: -- revise commit text Changes in v5: -- fix spelling at commit text Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset Changes in v7: -- drop 0 assignment at local variable (ret = 0) Changes in v8: -- add patch to remove pixel_rate from dp_ctrl Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report() Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()

2022-06-14T16:44:59Z

[ Upstream commit 993a2adc6e2e94a0a7b5bfc054eda90ac95f62c3 ] dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd related interrupt mask bits to disable hpd related interrupts due to it mistakenly think hpd related interrupt mask bits will be cleared by software reset of dp controller automatically. This mistake may cause system to crash during suspending procedure due to unexpected irq fired and trigger event thread to access dp controller registers with controller clocks are disabled. This patch fixes system crash during suspending problem by removing "enable" flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related interrupt mask bits are cleared to prevent unexpected from happening. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Changes in v4: -- correct Fixes's commit ID -- remove synchrons_irq() Changes in v5: -- revise commit text Changes in v6: -- add event_lock to protect "suspended" Changes in v7: -- delete "suspended" flag Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/486591/ Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test

2022-06-09T08:30:04Z

[ Upstream commit 2788b4efa60c1e03ac10a156f3fdbd3be0f9198c ] At normal operation, transmit phy test pattern has to be terminated before DP controller switch to video ready state. However during phy compliance testing, transmit phy test pattern should not be terminated until end of compliance test which usually indicated by unplugged interrupt. Only stop sending the train pattern in dp_ctrl_on_stream() if we're not doing compliance testing. We also no longer reset 'p_level' and 'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level' are acquired from link status at previous dpcd read and we like to use those level to start link training. Changes in v2: -- add more details commit text -- correct Fixes Changes in v3: -- drop unnecessary braces Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483564/ Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: reset DP controller before transmit phy test pattern

2022-06-09T08:30:04Z

[ Upstream commit 581d69981159b00f0443d171a4b900089f34ccfe ] DP controller state can not switch from video ready state to transmit phy pattern state at run time. DP mainlink has to be teared down followed by reset controller to default state to have DP controller switch to transmit phy test pattern state and start generate specified phy test pattern to sinker once main link setup again. Changes in v2: -- correct Fixes's commit id Fixes: 52352fe2f866 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483563/ Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

Merge tag 'drm-msm-next-2022-03-01' of https://gitlab.freedesktop.org/drm/msm into drm-next

2022-03-04T04:39:00Z

We're experimenting a bit with the process this time, with Dmitry collecting display patches and merging them into msm-next with me handling the gpu/etc side of things. Summary of interesting new bits and pieces * dpu + dp support for sc8180x * dp support for sm8350 * dpu + dsi support for qcm2290 * 10nm dsi phy tuning support * bridge support for dp encoder * gpu support for additional 7c3 SKUs * assorted cleanups and fixes Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com

drm/msm/dp: enhance debug info related to dp phy

2022-02-18T15:32:58Z

DP phy should be initialized and exited symmetrically to avoid clock being stucked at either on or off error. Add debug info to cover all DP phy to identify clock issues easily. Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1643828199-8564-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov

drm/msm/dp: stop link training after link training 2 failed

2022-02-18T15:32:58Z

Each DP link training contains link training 1 followed by link training 2. There is maximum of 5 retries of DP link training before declared link training failed. It is required to stop link training at end of link training 2 if it is failed so that next link training 1 can start freshly. This patch fixes link compliance test case 4.3.1.13 (Source Device Link Training EQ Fallback Test). Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov

drm/msm/dp: add support of tps4 (training pattern 4) for HBR3

2022-02-18T15:32:58Z

Some DP sinkers prefer to use tps4 instead of tps3 during training #2. This patch will use tps4 to perform link training #2 if sinker's DPCD supports it. Changes in V2: -- replace dp_catalog_ctrl_set_pattern() with dp_catalog_ctrl_set_pattern_state_bit() Changes in V3: -- change state_ctrl_bits type to u32 and pattern type to u8 Changes in V4: -- align } else if { and } else { Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov

drm/msm/dp: do not initialize phy until plugin interrupt received

2022-02-18T15:32:57Z

Current DP drivers have regulators, clocks, irq and phy are grouped together within a function and executed not in a symmetric manner. This increase difficulty of code maintenance and limited code scalability. This patch divides the driver life cycle of operation into four states, resume (including booting up), dongle plugin, dongle unplugged and suspend. Regulators, core clocks and irq are grouped together and enabled at resume (or booting up) so that the DP controller is armed and ready to receive HPD plugin interrupts. HPD plugin interrupt is generated when a dongle plugs into DUT (device under test). Once HPD plugin interrupt is received, DP controller will initialize phy so that dpcd read/write will function and following link training can be proceeded successfully. DP phy will be disabled after main link is teared down at end of unplugged HPD interrupt handle triggered by dongle unplugged out of DUT. Finally regulators, code clocks and irq are disabled at corresponding suspension. Changes in V2: -- removed unnecessary dp_ctrl NULL check -- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs -- remove flip parameter out of dp_ctrl_irq_enable() -- add fixes tag Changes in V3: -- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at dp_display_host_init() for eDP Changes in V4: -- rewording commit text to match this commit changes Changes in V5: -- rebase on top of msm-next branch Changes in V6: -- delete flip variable Changes in V7: -- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl() Changes in V8: -- add more detail comment regrading dp phy at dp_display_host_init() Changes in V9: -- remove set phy_initialized to false when -ECONNRESET detected Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Changes in v12: -- move dp_display_host_phy_exit() after dp_display_host_deinit() Changes in v13: -- do not execute phy_init until plugged_in interrupt for edp, same as DP. Changes in v14: -- remove redundant dp->core_initialized = false form dp_pm_suspend. Changes in v15: -- remove core_initialized flag check at both host_init and host_deinit Changes in v16: -- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend Changes in v17: -- remove core_initialized checking before execute attention_cb() Changes in v18: -- remove core_initialized checking at dp_pm_suspend Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov

Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2022-02-01T09:02:41Z

[airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com