kernel.git/drivers/gpu/drm/msm/dp/dp_ctrl.c, branch linux-5.17.y

drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()

2022-06-14T16:41:25Z

[ Upstream commit 993a2adc6e2e94a0a7b5bfc054eda90ac95f62c3 ] dp_catalog_ctrl_reset() will software reset DP controller. But it will not reset programmable registers to default value. DP driver still have to clear mask bits to interrupt status registers to disable interrupts after software reset of controller. At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd related interrupt mask bits to disable hpd related interrupts due to it mistakenly think hpd related interrupt mask bits will be cleared by software reset of dp controller automatically. This mistake may cause system to crash during suspending procedure due to unexpected irq fired and trigger event thread to access dp controller registers with controller clocks are disabled. This patch fixes system crash during suspending problem by removing "enable" flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related interrupt mask bits are cleared to prevent unexpected from happening. Changes in v2: -- add more details commit text Changes in v3: -- add synchrons_irq() -- add atomic_t suspended Changes in v4: -- correct Fixes's commit ID -- remove synchrons_irq() Changes in v5: -- revise commit text Changes in v6: -- add event_lock to protect "suspended" Changes in v7: -- delete "suspended" flag Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/486591/ Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test

2022-06-09T08:25:45Z

[ Upstream commit 2788b4efa60c1e03ac10a156f3fdbd3be0f9198c ] At normal operation, transmit phy test pattern has to be terminated before DP controller switch to video ready state. However during phy compliance testing, transmit phy test pattern should not be terminated until end of compliance test which usually indicated by unplugged interrupt. Only stop sending the train pattern in dp_ctrl_on_stream() if we're not doing compliance testing. We also no longer reset 'p_level' and 'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level' are acquired from link status at previous dpcd read and we like to use those level to start link training. Changes in v2: -- add more details commit text -- correct Fixes Changes in v3: -- drop unnecessary braces Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483564/ Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: reset DP controller before transmit phy test pattern

2022-06-09T08:25:45Z

[ Upstream commit 581d69981159b00f0443d171a4b900089f34ccfe ] DP controller state can not switch from video ready state to transmit phy pattern state at run time. DP mainlink has to be teared down followed by reset controller to default state to have DP controller switch to transmit phy test pattern state and start generate specified phy test pattern to sinker once main link setup again. Changes in v2: -- correct Fixes's commit id Fixes: 52352fe2f866 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Patchwork: https://patchwork.freedesktop.org/patch/483563/ Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: stop link training after link training 2 failed

2022-04-08T11:58:09Z

[ Upstream commit 9051d629dbf7a998a40f7eac65a9512b01bc3bb8 ] Each DP link training contains link training 1 followed by link training 2. There is maximum of 5 retries of DP link training before declared link training failed. It is required to stop link training at end of link training 2 if it is failed so that next link training 1 can start freshly. This patch fixes link compliance test case 4.3.1.13 (Source Device Link Training EQ Fallback Test). Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: do not initialize phy until plugin interrupt received

2022-04-08T11:58:08Z

[ Upstream commit 989ebe7bc4463002c210db0010c8475797a9098f ] Current DP drivers have regulators, clocks, irq and phy are grouped together within a function and executed not in a symmetric manner. This increase difficulty of code maintenance and limited code scalability. This patch divides the driver life cycle of operation into four states, resume (including booting up), dongle plugin, dongle unplugged and suspend. Regulators, core clocks and irq are grouped together and enabled at resume (or booting up) so that the DP controller is armed and ready to receive HPD plugin interrupts. HPD plugin interrupt is generated when a dongle plugs into DUT (device under test). Once HPD plugin interrupt is received, DP controller will initialize phy so that dpcd read/write will function and following link training can be proceeded successfully. DP phy will be disabled after main link is teared down at end of unplugged HPD interrupt handle triggered by dongle unplugged out of DUT. Finally regulators, code clocks and irq are disabled at corresponding suspension. Changes in V2: -- removed unnecessary dp_ctrl NULL check -- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs -- remove flip parameter out of dp_ctrl_irq_enable() -- add fixes tag Changes in V3: -- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at dp_display_host_init() for eDP Changes in V4: -- rewording commit text to match this commit changes Changes in V5: -- rebase on top of msm-next branch Changes in V6: -- delete flip variable Changes in V7: -- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl() Changes in V8: -- add more detail comment regrading dp phy at dp_display_host_init() Changes in V9: -- remove set phy_initialized to false when -ECONNRESET detected Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Changes in v12: -- move dp_display_host_phy_exit() after dp_display_host_deinit() Changes in v13: -- do not execute phy_init until plugged_in interrupt for edp, same as DP. Changes in v14: -- remove redundant dp->core_initialized = false form dp_pm_suspend. Changes in v15: -- remove core_initialized flag check at both host_init and host_deinit Changes in v16: -- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend Changes in v17: -- remove core_initialized checking before execute attention_cb() Changes in v18: -- remove core_initialized checking at dp_pm_suspend Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: Enable ASSR for supported DP sinks

2021-11-28T17:32:03Z

The eDP sink on sc7280 supports ASSR and dp driver will enable ASSR in the source hardware. The driver needs to enable the ASSR field in the DPCD configuration register to avoid screen corruption. This change will enable ASSR if supported in the sink device. Signed-off-by: Sankeerth Billakanti Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1635839325-401-6-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark

drm/msm/dp: Enable downspread for supported DP sinks

2021-11-28T17:32:03Z

The sc7280 eDP sink that supports downspread will fail link training if source does not enable SSC / downspread. This change will set the downspread bit in the DP sink if supported and indicate SSC support to the DP PHY driver. Signed-off-by: Sankeerth Billakanti Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1635839325-401-5-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark

drm/msm/dp: do not end dp link training until video is ready

2021-08-10T21:49:54Z

Initialize both pre-emphasis and voltage swing level to 0 before start link training and do not end link training until video is ready to reduce the period between end of link training and video start to meet Link Layer CTS requirement. Some dongle main link symbol may become unlocked again if host did not end link training soon enough after completion of link training 2. Host have to re train main link if loss of symbol locked detected before end link training so that the coming video stream can be transmitted to sink properly. This fixes Link Layer CTS cases 4.3.2.1, 4.3.2.2, 4.3.2.3 and 4.3.2.4. Changes in v3: -- merge retrain link if loss of symbol locked happen into this patch -- replace dp_ctrl_loss_symbol_lock() with dp_ctrl_channel_eq_ok() Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-7-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark

drm/msm/dp: reduce link rate if failed at link training 1

2021-08-10T21:48:16Z

Reduce link rate and re start link training if link training 1 failed due to loss of clock recovery done to fix Link Layer CTS case 4.3.1.7. Also only update voltage and pre-emphasis swing level after link training started to fix Link Layer CTS case 4.3.1.6. Changes in V2: -- replaced cr_status with link_status[DP_LINK_STATUS_SIZE] -- replaced dp_ctrl_any_lane_cr_done() with dp_ctrl_colco_recovery_any_ok() -- replaced dp_ctrl_any_ane_cr_lose() with !drm_dp_clock_recovery_ok() Changes in V3: -- return failed if lane_count <= 1 Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-3-git-send-email-khsieh@codeaurora.org [remove unused cr_status variable] Signed-off-by: Rob Clark

drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run

2021-08-10T21:45:23Z

DP cable should always connect to DPU during the entire PHY compliance testing run. Since DP PHY compliance test is executed at irq_hpd event context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off(). dp_ctrl_off() is used for unplug event which is triggered when DP cable is dis connected. Changes in V2: -- add fixes statement Fixes: f21c8a276c2d ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1628196295-7382-2-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark