kernel.git/drivers/gpu/drm/ingenic, branch linux-5.16.y

drm/ingenic: Use standard drm_atomic_helper_commit_tail

2021-08-11T13:49:15Z

By making the CRTC's .vblank_enable() function return an error when it is known that the hardware won't deliver a VBLANK, we can drop the ingenic_drm_atomic_helper_commit_tail() function and use the standard drm_atomic_helper_commit_tail() function instead. Signed-off-by: Paul Cercueil Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net

drm/ingenic: Remove dead code

2021-08-11T13:48:21Z

The priv->ipu_plane would get a different value further down the code, without the first assigned value being read first; so the first assignation can be dropped. Signed-off-by: Paul Cercueil Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net

drm/bridge: Centralize error message when bridge attach fails

2021-07-28T13:33:12Z

Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd Signed-off-by: Laurent Pinchart Reviewed-by: Tomi Valkeinen Reviewed-by: Jyri Sarha

drm/ingenic: Convert to Linux IRQ interfaces

2021-07-19T20:50:50Z

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. This patch also fixes a bug where the driver didn't release the IRQ. v2: * automatically release IRQ via devm_request_irq() (Paul) * mention the bugfix (Sam) Signed-off-by: Thomas Zimmermann Reviewed-by: Sam Ravnborg Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20210715100258.6638-1-tzimmermann@suse.de

drm/: drm_gem_plane_helper_prepare_fb is now the default

2021-06-24T13:35:24Z

No need to set it explicitly. Acked-by: Philipp Zabel Acked-by: Heiko Stuebner Acked-by: Paul Cercueil Acked-by: Jernej Skrabec Acked-by: Chun-Kuang Hu Acked-by: Martin Blumenstingl Acked-by: Tomi Valkeinen Acked-by: Philippe Cornu Acked-by: Lucas Stach Signed-off-by: Daniel Vetter Cc: Laurentiu Palcu Cc: Lucas Stach Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Philipp Zabel Cc: Paul Cercueil Cc: Chun-Kuang Hu Cc: Matthias Brugger Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Marek Vasut Cc: Stefan Agner Cc: Sandy Huang Cc: "Heiko Stübner" Cc: Yannick Fertre Cc: Philippe Cornu Cc: Benjamin Gaignard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: Jyri Sarha Cc: Tomi Valkeinen Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch

drm/ingenic: Add option to alloc cached GEM buffers

2021-05-25T10:42:53Z

Alloc GEM buffers backed by noncoherent memory on SoCs where it is actually faster than write-combine. This dramatically speeds up software rendering on these SoCs, even for tasks where write-combine memory should in theory be faster (e.g. simple blits). v3: The option is now selected per-SoC instead of being a module parameter. v5: - Fix drm_atomic_get_new_plane_state() used to retrieve the old state - Use custom drm_gem_fb_create() - Only check damage clips and sync DMA buffers if non-coherent buffers are used Signed-off-by: Paul Cercueil Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210523170415.90410-4-paul@crapouillou.net

drm/ingenic: Fix pixclock rate for 24-bit serial panels

2021-05-17T15:07:04Z

When using a 24-bit panel on a 8-bit serial bus, the pixel clock requested by the panel has to be multiplied by 3, since the subpixels are shifted sequentially. The code (in ingenic_drm_encoder_atomic_check) already computed crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate() used crtc_state->adjusted_mode->clock instead. Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using a 3x8-bit panel") Cc: stable@vger.kernel.org # v5.10 Signed-off-by: Paul Cercueil Tested-by: H. Nikolaus Schaller # CI20/jz4780 (HDMI) and Alpha400/jz4730 (LCD) Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210323144008.166248-1-paul@crapouillou.net

drm/ingenic: Switch IPU plane to type OVERLAY

2021-05-13T12:51:12Z

It should have been an OVERLAY from the beginning. The documentation stipulates that there should be an unique PRIMARY plane per CRTC. Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU") Cc: # 5.8+ Signed-off-by: Paul Cercueil Acked-by: Simon Ser Link: https://patchwork.freedesktop.org/patch/msgid/20210329175046.214629-2-paul@crapouillou.net

drm/ingenic: Register devm action to cleanup encoders

2021-03-29T15:47:12Z

Since the encoders have been devm-allocated, they will be freed way before drm_mode_config_cleanup() is called. To avoid use-after-free conditions, we then must ensure that drm_encoder_cleanup() is called before the encoders are freed. v2: Use the new __drmm_simple_encoder_alloc() function v3: Use the new drmm_plain_simple_encoder_alloc() macro v4: Use drmm_plain_encoder_alloc() macro Fixes: c369cb27c267 ("drm/ingenic: Support multiple panels/bridges") Cc: # 5.8+ Signed-off-by: Paul Cercueil Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-4-paul@crapouillou.net

drm/ingenic: Fix non-OSD mode

2021-03-07T16:27:22Z

Even though the JZ4740 did not have the OSD mode, it had (according to the documentation) two DMA channels, but there is absolutely no information about how to select the second DMA channel. Make the ingenic-drm driver work in non-OSD mode by using the foreground0 plane (which is bound to the DMA0 channel) as the primary plane, instead of the foreground1 plane, which is the primary plane when in OSD mode. Fixes: 3c9bea4ef32b ("drm/ingenic: Add support for OSD mode") Cc: # v5.8+ Signed-off-by: Paul Cercueil Acked-by: Daniel Vetter Tested-by: H. Nikolaus Schaller Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net