kernel.git/drivers/gpu/drm/i915, branch linux-5.17.y

drm/i915/dsi: fix VBT send packet port selection for ICL+

2022-06-09T08:26:24Z

commit 0ea917819d12fed41ea4662cc26ffa0060a5c354 upstream. The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084edc5a ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala Signed-off-by: Jani Nikula Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com (cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485) Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix CFI violation with show_dynamic_id()

2022-06-09T08:25:55Z

[ Upstream commit 58606220a2f1407a7516c547f09a1ba7b4350a73 ] When an attribute group is created with sysfs_create_group(), the ->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show() callback to kobj_attr_show(). kobj_attr_show() uses container_of() to get the ->show() callback from the attribute it was passed, meaning the ->show() callback needs to be the same type as the ->show() callback in 'struct kobj_attribute'. However, show_dynamic_id() has the type of the ->show() callback in 'struct device_attribute', which causes a CFI violation when opening the 'id' sysfs node under drm/card0/metrics. This happens to work because the layout of 'struct kobj_attribute' and 'struct device_attribute' are the same, so the container_of() cast happens to allow the ->show() callback to still work. Change the type of show_dynamic_id() to match the ->show() callback in 'struct kobj_attributes' and update the type of sysfs_metric_id to match, which resolves the CFI violation. Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Signed-off-by: Nathan Chancellor Reviewed-by: Kees Cook Reviewed-by: Sami Tolvanen Signed-off-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 18fb42db05a0b93ab5dd5eab5315e50eaa3ca620) Signed-off-by: Jani Nikula Signed-off-by: Sasha Levin

drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency()

2022-06-06T06:47:51Z

commit 336feb502a715909a8136eb6a62a83d7268a353b upstream. Fix the following -Wstringop-overflow warnings when building with GCC-11: drivers/gpu/drm/i915/intel_pm.c:3106:9: warning: ‘intel_read_wm_latency’ accessing 16 bytes in a region of size 10 [-Wstringop-overflow=] 3106 | intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_pm.c:3106:9: note: referencing argument 2 of type ‘u16 *’ {aka ‘short unsigned int *’} drivers/gpu/drm/i915/intel_pm.c:2861:13: note: in a call to function ‘intel_read_wm_latency’ 2861 | static void intel_read_wm_latency(struct drm_i915_private *dev_priv, | ^~~~~~~~~~~~~~~~~~~~~ by removing the over-specified array size from the argument declarations. It seems that this code is actually safe because the size of the array depends on the hardware generation, and the function checks for that. Notice that wm can be an array of 5 elements: drivers/gpu/drm/i915/intel_pm.c:3109: intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency); or an array of 8 elements: drivers/gpu/drm/i915/intel_pm.c:3131: intel_read_wm_latency(dev_priv, dev_priv->wm.skl_latency); and the compiler legitimately complains about that. This helps with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/181 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

i915/guc/reset: Make __guc_reset_context aware of guilty engines

2022-05-25T07:59:06Z

[ Upstream commit 89e96d822bd51f7afe2d3e95a34099480b5c3d55 ] There are 2 ways an engine can get reset in i915 and the method of reset affects how KMD labels a context as guilty/innocent. (1) GuC initiated engine-reset: GuC resets a hung engine and notifies KMD. The context that hung on the engine is marked guilty and all other contexts are innocent. The innocent contexts are resubmitted. (2) GT based reset: When an engine heartbeat fails to tick, KMD initiates a gt/chip reset. All active contexts are marked as guilty and discarded. In order to correctly mark the contexts as guilty/innocent, pass a mask of engines that were reset to __guc_reset_context. Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface") Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: Alan Previn Signed-off-by: John Harrison Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 303760aa914b7f5ac9602dbb4b471a2ad52eeb3e) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin

drm/i915/dmc: Add MMIO range restrictions

2022-05-25T07:59:04Z

commit 54395a33718af1c04b5098203335b25382291a16 upstream. Bspec has added some steps that check forDMC MMIO range before programming them v2: Fix for CI v3: move register defines to .h (Anusha) - Check MMIO restrictions per pipe - Add MMIO restricton for v1 dmc header as well (Lucas) v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario. - clean up sanity check logic.(Lucas) - Add MMIO range for RKL as well.(Anusha) v5: Use DISPLAY_VER instead of per platform check (Lucas) BSpec: 49193 Cc: stable@vger.kernel.org Cc: Lucas De Marchi Signed-off-by: Anusha Srivatsa Reviewed-by: Lucas De Marchi Signed-off-by: Lucas De Marchi Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com (cherry picked from commit 21c47196aec3a93f913a7515e1e7b30e6c54d6c6) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

Revert "drm/i915/opregion: check port number bounds for SWSCI display power state"

2022-05-25T07:58:58Z

This reverts commit b84857c06ef9e72d09fadafdbb3ce9af64af954f. 5.10 stable contains 2 identical commits: 1. commit eb7bf11e8ef1 ("drm/i915/opregion: check port number bounds for SWSCI display power state") 2. commit b84857c06ef9 ("drm/i915/opregion: check port number bounds for SWSCI display power state") Both commits add separate checks for the same condition. Revert the 2nd redundant check to match upstream, which only has one check. Signed-off-by: Greg Thelen Signed-off-by: Yu Liao Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses

2022-05-09T07:16:30Z

commit 4ae4dd2e26fdfebf0b8c6af6c325383eadfefdb4 upstream. Fix typo in the _SEL_FETCH_PLANE_BASE_1_B register base address. Fixes: a5523e2ff074a5 ("drm/i915: Add PSR2 selective fetch registers") References: https://gitlab.freedesktop.org/drm/intel/-/issues/5400 Cc: José Roberto de Souza Cc: # v5.9+ Signed-off-by: Imre Deak Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20220421162221.2261895-1-imre.deak@intel.com (cherry picked from commit af2cbc6ef967f61711a3c40fca5366ea0bc7fecc) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

drm/i915: Check EDID for HDR static metadata when choosing blc

2022-05-09T07:16:29Z

commit c05d8332f5d23fa3b521911cbe55a2b67fb21248 upstream. We have now seen panel (XMG Core 15 e21 laptop) advertizing support for Intel proprietary eDP backlight control via DPCD registers, but actually working only with legacy pwm control. This patch adds panel EDID check for possible HDR static metadata and Intel proprietary eDP backlight control is used only if that exists. Missing HDR static metadata is ignored if user specifically asks for Intel proprietary eDP backlight control via enable_dpcd_backlight parameter. v2 : - Ignore missing HDR static metadata if Intel proprietary eDP backlight control is forced via i915.enable_dpcd_backlight - Printout info message if panel is missing HDR static metadata and support for Intel proprietary eDP backlight control is detected Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284 Cc: Lyude Paul Cc: Mika Kahola Cc: Jani Nikula Cc: Filippo Falezza Cc: stable@vger.kernel.org Signed-off-by: Jouni Högander Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com Reviewed-by: Lyude Paul (cherry picked from commit b4b157577cb1de13bee8bebc3576f1de6799a921) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails

2022-04-27T12:41:02Z

[ Upstream commit bb02330408a7bde33b5f46aa14fd5d7bfe6093b7 ] If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid() fails, enable_psr2_sel_fetch will be kept enabled causing problems in the functions that only checks for it and not for has_psr2. So here moving the check that do not depend on enable_psr2_sel_fetch and for the remaning ones jumping to a section that unset enable_psr2_sel_fetch in case of failure to support PSR2. Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch") Cc: Jouni Högander Reviewed-by: Jouni Högander Signed-off-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com (cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin

drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL

2022-04-20T07:36:28Z

commit 1acb34e7dd7720a1fff00cbd4d000ec3219dc9d6 upstream. The intent of the version check in the mmap ioctl was to maintain support for existing platforms (i.e., ADL/RPL and earlier), but drop support on all future igpu platforms. As we've seen on the dgpu side, the hardware teams are using a more fine-grained numbering system for IP version numbers these days, so it's possible the version number associated with our next igpu could be some form of "12.xx" rather than 13 or higher. Comparing against the full ver.release number will ensure the intent of the check is maintained no matter what numbering the hardware teams settle on. Fixes: d3f3baa3562a ("drm/i915: Reinstate the mmap ioctl for some platforms") Cc: Thomas Hellström Cc: Lucas De Marchi Signed-off-by: Matt Roper Reviewed-by: Lucas De Marchi Link: https://patchwork.freedesktop.org/patch/msgid/20220407161839.1073443-1-matthew.d.roper@intel.com (cherry picked from commit 8e7e5c077cd57ee9a36d58c65f07257dc49a88d5) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman