kernel.git/drivers/gpu/drm/i915/display, branch master

drm/i915/psr: Compute PSR entry_setup_frames into intel_crtc_state

2026-03-17T09:17:46Z

PSR entry_setup_frames is currently computed directly into struct intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change gets rejected after PSR compute config: Psr_entry_setup_frames computed for this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by computing it into intel_crtc_state and copy the value into intel_dp:intel_psr:entry_setup_frames on PSR enable. Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier") Cc: Mika Kahola Cc: # v6.8+ Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com (cherry picked from commit 8c229b4aa00262c13787982e998c61c0783285e0) Signed-off-by: Joonas Lahtinen

drm/i915/psr: Disable PSR on update_m_n and update_lrr

2026-03-17T09:17:43Z

PSR/PR parameters might change based on update_m_n or update_lrr. Disable on update_m_n and update_lrr to ensure proper parameters are taken into use on next PSR enable in intel_psr_post_plane_update. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15771 Fixes: 2bc98c6f97af ("drm/i915/alpm: Compute ALPM parameters into crtc_state->alpm_state") Cc: # v6.19+ Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260312083710.1593781-2-jouni.hogander@intel.com (cherry picked from commit 65852b56bfa929f99e28c96fd98b02058959da7f) Signed-off-by: Joonas Lahtinen

drm/i915/dmc: Fix an unlikely NULL pointer deference at probe

2026-03-16T07:41:15Z

intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been initialized, and dmc is thus NULL. That would be the case when the call path is intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() -> gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as intel_power_domains_init_hw() is called *before* intel_dmc_init(). However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count() conditionally, depending on the current and target DC states. At probe, the target is disabled, but if DC6 is enabled, the function is called, and an oops follows. Apparently it's quite unlikely that DC6 is enabled at probe, as we haven't seen this failure mode before. It is also strange to have DC6 enabled at boot, since that would require the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and the driver stopping / reprogramming the firmware is a poorly specified sequence and as such unlikely an intentional BIOS behaviour. It's more likely that BIOS is leaving an unintentionally enabled DC6 HW state behind (without actually loading the required DMC firmware for this). The tracking of the DC6 allowed counter only works if starting / stopping the counter depends on the _SW_ DC6 state vs. the current _HW_ DC6 state (since stopping the counter requires the DC5 counter captured when the counter was started). Thus, using the HW DC6 state is incorrect and it also leads to the above oops. Fix both issues by using the SW DC6 state for the tracking. This is v2 of the fix originally sent by Jani, updated based on the first Link: discussion below. Link: https://lore.kernel.org/all/3626411dc9e556452c432d0919821b76d9991217@intel.com Link: https://lore.kernel.org/all/20260228130946.50919-2-ltao@redhat.com Fixes: 88c1f9a4d36d ("drm/i915/dmc: Create debugfs entry for dc6 counter") Cc: Mohammed Thasleem Cc: Jani Nikula Cc: Tao Liu Cc: # v6.16+ Tested-by: Tao Liu Reviewed-by: Jani Nikula Signed-off-by: Imre Deak Link: https://patch.msgid.link/20260309164803.1918158-1-imre.deak@intel.com (cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) Signed-off-by: Joonas Lahtinen

drm/i915/dp: Read ALPM caps after DPCD init

2026-03-10T08:26:33Z

For eDP read the ALPM DPCD caps after DPCD initalization and just before the PSR init. v2: Move intel_alpm_init to intel_edp_init_dpcd (Jouni) v3: Add Fixes with commit-id (Jouni) v4: Separated the alpm dpcd read caps from alpm_init and moved to intel_edp_init_dpcd. v5: Read alpm_caps always for eDP irrespective of the eDP version (Jouni) v6: replace drm_dp_dpcd_readb with drm_dp_dpcd_read_byte (Jouni) Fixes: 15438b325987 ("drm/i915/alpm: Add compute config for lobf") Signed-off-by: Arun R Murthy Reviewed-by: Animesh Manna Reviewed-by: Jouni Högander Signed-off-by: Animesh Manna Link: https://patch.msgid.link/20260304072157.1123283-1-arun.r.murthy@intel.com (cherry picked from commit 88442ba208dd5d3405de3f5000cf5b2c86876ae3) Signed-off-by: Tvrtko Ursulin

drm/i915/psr: Write DSC parameters on Selective Update in ET mode

2026-03-10T08:26:33Z

There are slice row per frame and pic height parameters in DSC that needs to be configured on every Selective Update in Early Transport mode. Use helper provided by DSC code to configure these on Selective Update when in Early Transport mode. Also fill crtc_state->psr2_su_area with full frame area on full frame update for DSC calculation. v2: move psr2_su_area under skip_sel_fetch_set_loop label Bspec: 68927, 71709 Fixes: 467e4e061c44 ("drm/i915/psr: Enable psr2 early transport as possible") Cc: # v6.9+ Signed-off-by: Jouni Högander Reviewed-by: Ankit Nautiyal Link: https://patch.msgid.link/20260304113011.626542-5-jouni.hogander@intel.com (cherry picked from commit 3140af2fab505a4cd47d516284529bf1585628be) Signed-off-by: Tvrtko Ursulin

drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters

2026-03-10T08:26:12Z

There are slice row per frame and pic height configuration in DSC Selective Update Parameter Set 1 register. Add helper for configuring these. v2: - Add WARN_ON_ONCE if vdsc instances per pipe > 2 - instead of checking vdsc instances per pipe being > 1 check == 2 Bspec: 71709 Signed-off-by: Jouni Högander Reviewed-by: Ankit Nautiyal Link: https://patch.msgid.link/20260304113011.626542-4-jouni.hogander@intel.com (cherry picked from commit c8698d61aeb3f70fe33761ee9d3d0e131b5bc2eb) Signed-off-by: Tvrtko Ursulin [tursulin: fixup forward declaration conflict]

drm/i915/dsc: Add Selective Update register definitions

2026-03-10T08:22:10Z

Add definitions for DSC_SU_PARAMETER_SET_0_DSC0 and DSC_SU_PARAMETER_SET_0_DSC1 registers. These are for Selective Update Early Transport configuration. Bspec: 71709 Signed-off-by: Jouni Högander Reviewed-by: Ankit Nautiyal Link: https://patch.msgid.link/20260304113011.626542-3-jouni.hogander@intel.com (cherry picked from commit 24f96d903daf3dcf8fafe84d3d22b80ef47ba493) Signed-off-by: Tvrtko Ursulin

drm/i915/psr: Repeat Selective Update area alignment

2026-03-10T08:11:34Z

Currently we are aligning Selective Update area to cover cursor fully if needed only once. It may happen that cursor is in Selective Update area after pipe alignment and after that covering cursor plane only partially. Fix this by looping alignment as long as alignment isn't needed anymore. v2: - do not unecessarily loop if cursor was already fully covered - rename aligned as su_area_changed Fixes: 1bff93b8bc27 ("drm/i915/psr: Extend SU area to cover cursor fully if needed") Cc: # v6.9+ Signed-off-by: Jouni Högander Reviewed-by: Ankit Nautiyal Link: https://patch.msgid.link/20260304113011.626542-2-jouni.hogander@intel.com (cherry picked from commit 681e12440d8b110350a5709101169f319e10ccbb) Signed-off-by: Tvrtko Ursulin

drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL

2026-03-10T08:11:29Z

Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE before enabling TRANS_DDI_FUNC_CTL. Personally I was only able to reproduce a hang (on an Dell XPS 7390 2-in-1) with an external display connected via a dock using a dodgy type-C cable that made the link training fail. After the failed link training the machine would hang. TGL seemed immune to the problem for whatever reason. BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL as well. The DMC firmware also does the VRR restore in two stages: - first stage seems to be unconditional and includes TRANS_VRR_CTL and a few other VRR registers, among other things - second stage is conditional on the DDI being enabled, and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE, among other things So let's reorder the steps to match to avoid the hang, and toss in an extra WARN to make sure we don't screw this up later. BSpec: 22243 Cc: stable@vger.kernel.org Cc: Ankit Nautiyal Reported-by: Benjamin Tissoires Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15777 Tested-by: Benjamin Tissoires Fixes: dda7dcd9da73 ("drm/i915/vrr: Use fixed timings for platforms that support VRR") Signed-off-by: Ville Syrjälä Link: https://patch.msgid.link/20260303095414.4331-1-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal (cherry picked from commit 93f3a267c3dd4d811b224bb9e179a10d81456a74) Signed-off-by: Tvrtko Ursulin

drm/i915/psr: Fix for Panel Replay X granularity DPCD register handling

2026-03-04T13:26:08Z

DP specification is saying value 0xff 0xff in PANEL REPLAY SELECTIVE UPDATE X GRANULARITY CAPABILITY registers (0xb2 and 0xb3) means full-line granularity. Take this into account when handling Panel Replay X granularity informed by the panel. Fixes: 1cc854647450 ("drm/i915/psr: Use SU granularity information available in intel_connector") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7284 Tested-by: Mark Pearson Signed-off-by: Jouni Högander Reviewed-by: Uma Shankar Link: https://patch.msgid.link/20260225074221.1744330-2-jouni.hogander@intel.com (cherry picked from commit f5c8f824a495e849492f09a43bd965a8f4d86cb2) Signed-off-by: Joonas Lahtinen