kernel.git/drivers/gpu/drm/i915/display, branch linux-5.4.y

drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv

2023-03-11T15:44:07Z

commit 5e438bf7f9a1705ebcae5fa89cdbfbc6932a7871 upstream. This laptop uses inverted backlight PWM. Thus, without this quirk, backlight brightness decreases as the brightness value increases and vice versa. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8013 Cc: stable@vger.kernel.org Signed-off-by: Mavroudis Chatzilaridis Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20230201184947.8835-1-mavchatz@protonmail.com (cherry picked from commit 83e7d6fd330d413cb2064e680ffea91b0512a520) Signed-off-by: Greg Kroah-Hartman

drm/i915/sdvo: Setup DDC fully before output init

2022-11-10T16:57:57Z

commit e79762512120f11c51317570519a1553c70805d8 upstream. Call intel_sdvo_select_ddc_bus() before initializing any of the outputs. And before that is functional (assuming no VBT) we have to set up the controlled_outputs thing. Otherwise DDC won't be functional during the output init but LVDS really needs it for the fixed mode setup. Note that the whole multi output support still looks very bogus, and more work will be needed to make it correct. But for now this should at least fix the LVDS EDID fixed mode setup. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit 64b7b557dc8a96d9cfed6aedbf81de2df80c025d) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman

drm/i915/sdvo: Filter out invalid outputs more sensibly

2022-11-10T16:57:57Z

commit 3e206b6aa6df7eed4297577e0cf8403169b800a2 upstream. We try to filter out the corresponding xxx1 output if the xxx0 output is not present. But the way that is being done is pretty awkward. Make it less so. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit cc1e66394daaa7e9f005e2487a84e34a39f9308b) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman

drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing quirk

2022-09-15T10:04:53Z

commit 919bef7a106ade2bda73681bbc2f3678198f44fc upstream. The quirk added in upstream commit 90c3e2198777 ("drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva Q2. Note: Would be nicer to figure out the extra delay required for the retimer without quirks, however don't know how to check for that. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326 Signed-off-by: Diego Santa Cruz Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20220616124137.3184371-1-jani.nikula@intel.com (cherry picked from commit 08e9505fa8f9aa00072a47b6f234d89b6b27a89c) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()

2022-07-21T18:59:19Z

[ Upstream commit 85144df9ff4652816448369de76897c57cbb1b93 ] If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. Fixes: 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector") Signed-off-by: Hangyu Hua Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com Signed-off-by: José Roberto de Souza (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin

drm/i915/overlay: Prevent divide by zero bugs in scaling

2022-02-08T17:24:32Z

commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream. Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman

drm/i915/dp: Ensure sink rate values are always valid

2021-11-26T09:47:22Z

commit 6c34bd4532a3f39952952ddc102737595729afc4 upstream. Atm, there are no sink rate values set for DP (vs. eDP) sinks until the DPCD capabilities are successfully read from the sink. During this time intel_dp->num_common_rates is 0 which can lead to a intel_dp->common_rates[-1] (*) access, which is an undefined behaviour, in the following cases: - In intel_dp_sync_state(), if the encoder is enabled without a sink connected to the encoder's connector (BIOS enabled a monitor, but the user unplugged the monitor until the driver loaded). - In intel_dp_sync_state() if the encoder is enabled with a sink connected, but for some reason the DPCD read has failed. - In intel_dp_compute_link_config() if modesetting a connector without a sink connected on it. - In intel_dp_compute_link_config() if modesetting a connector with a a sink connected on it, but before probing the connector first. To avoid the (*) access in all the above cases, make sure that the sink rate table - and hence the common rate table - is always valid, by setting a default minimum sink rate when registering the connector before anything could use it. I also considered setting all the DP link rates by default, so that modesetting with higher resolution modes also succeeds in the last two cases above. However in case a sink is not connected that would stop working after the first modeset, due to the LT fallback logic. So this would need more work, beyond the scope of this fix. As I mentioned in the previous patch, I don't think the issue this patch fixes is user visible, however it is an undefined behaviour by definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable. v2: Clear the default sink rates, before initializing these for eDP. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297 References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298 Suggested-by: Ville Syrjälä Cc: Ville Syrjälä Cc: Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Acked-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com (cherry picked from commit 3f61ef9777c0ab0f03f4af0ed6fd3e5250537a8d) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

i915: fix build warning in intel_dp_get_link_status()

2021-06-03T06:59:16Z

There is a build warning using gcc-11 showing a mis-match in the .h and .c definitions of intel_dp_get_link_status(): CC [M] drivers/gpu/drm/i915/display/intel_dp.o drivers/gpu/drm/i915/display/intel_dp.c:4139:56: warning: argument 2 of type ‘u8[6]’ {aka ‘unsigned char[6]’} with mismatched bound [-Warray-parameter=] 4139 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STATUS_SIZE]) | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/gpu/drm/i915/display/intel_dp.c:51: drivers/gpu/drm/i915/display/intel_dp.h:105:57: note: previously declared as ‘u8 *’ {aka ‘unsigned char *’} 105 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status); | ~~~~^~~~~~~~~~~ This was fixed accidentally commit b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") by getting rid of the function entirely, but that is not a viable backport for a stable kernel, so just fix up the function definition to remove the build warning entirely. There is no functional change for this, and it fixes up one of the last 'make allmodconfig' build warnings when using gcc-11 on this kernel tree. Signed-off-by: Greg Kroah-Hartman

drm/i915/display: fix compiler warning about array overrun

2021-06-03T06:59:16Z

commit fec4d42724a1bf3dcba52307e55375fdb967b852 upstream. intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula Cc: Ville Syrjälä Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: Daniel Vetter Cc: Dave Airlie Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix invalid access to ACPI _DSM objects

2021-04-14T06:24:10Z

commit b6a37a93c9ac3900987c79b726d0bb3699d8db4e upstream. intel_dsm_platform_mux_info() tries to parse the ACPI package data from _DSM for the debug information, but it assumes the fixed format without checking what values are stored in the elements actually. When an unexpected value is returned from BIOS, it may lead to GPF or NULL dereference, as reported recently. Add the checks of the contents in the returned values and skip the values for invalid cases. v1->v2: Check the info contents before dereferencing, too BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1184074 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210402082317.871-1-tiwai@suse.de (cherry picked from commit 337d7a1621c7f02af867229990ac67c97da1b53a) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman