kernel.git/drivers/gpu/drm/i915/display, branch linux-5.17.y

drm/i915/dsi: fix VBT send packet port selection for ICL+

2022-06-09T08:26:24Z

commit 0ea917819d12fed41ea4662cc26ffa0060a5c354 upstream. The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084edc5a ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala Signed-off-by: Jani Nikula Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com (cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485) Signed-off-by: Greg Kroah-Hartman

drm/i915/dmc: Add MMIO range restrictions

2022-05-25T07:59:04Z

commit 54395a33718af1c04b5098203335b25382291a16 upstream. Bspec has added some steps that check forDMC MMIO range before programming them v2: Fix for CI v3: move register defines to .h (Anusha) - Check MMIO restrictions per pipe - Add MMIO restricton for v1 dmc header as well (Lucas) v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario. - clean up sanity check logic.(Lucas) - Add MMIO range for RKL as well.(Anusha) v5: Use DISPLAY_VER instead of per platform check (Lucas) BSpec: 49193 Cc: stable@vger.kernel.org Cc: Lucas De Marchi Signed-off-by: Anusha Srivatsa Reviewed-by: Lucas De Marchi Signed-off-by: Lucas De Marchi Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com (cherry picked from commit 21c47196aec3a93f913a7515e1e7b30e6c54d6c6) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

Revert "drm/i915/opregion: check port number bounds for SWSCI display power state"

2022-05-25T07:58:58Z

This reverts commit b84857c06ef9e72d09fadafdbb3ce9af64af954f. 5.10 stable contains 2 identical commits: 1. commit eb7bf11e8ef1 ("drm/i915/opregion: check port number bounds for SWSCI display power state") 2. commit b84857c06ef9 ("drm/i915/opregion: check port number bounds for SWSCI display power state") Both commits add separate checks for the same condition. Revert the 2nd redundant check to match upstream, which only has one check. Signed-off-by: Greg Thelen Signed-off-by: Yu Liao Signed-off-by: Greg Kroah-Hartman

drm/i915: Check EDID for HDR static metadata when choosing blc

2022-05-09T07:16:29Z

commit c05d8332f5d23fa3b521911cbe55a2b67fb21248 upstream. We have now seen panel (XMG Core 15 e21 laptop) advertizing support for Intel proprietary eDP backlight control via DPCD registers, but actually working only with legacy pwm control. This patch adds panel EDID check for possible HDR static metadata and Intel proprietary eDP backlight control is used only if that exists. Missing HDR static metadata is ignored if user specifically asks for Intel proprietary eDP backlight control via enable_dpcd_backlight parameter. v2 : - Ignore missing HDR static metadata if Intel proprietary eDP backlight control is forced via i915.enable_dpcd_backlight - Printout info message if panel is missing HDR static metadata and support for Intel proprietary eDP backlight control is detected Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284 Cc: Lyude Paul Cc: Mika Kahola Cc: Jani Nikula Cc: Filippo Falezza Cc: stable@vger.kernel.org Signed-off-by: Jouni Högander Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com Reviewed-by: Lyude Paul (cherry picked from commit b4b157577cb1de13bee8bebc3576f1de6799a921) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails

2022-04-27T12:41:02Z

[ Upstream commit bb02330408a7bde33b5f46aa14fd5d7bfe6093b7 ] If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid() fails, enable_psr2_sel_fetch will be kept enabled causing problems in the functions that only checks for it and not for has_psr2. So here moving the check that do not depend on enable_psr2_sel_fetch and for the remaning ones jumping to a section that unset enable_psr2_sel_fetch in case of failure to support PSR2. Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch") Cc: Jouni Högander Reviewed-by: Jouni Högander Signed-off-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com (cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin

drm/i915: Reject unsupported TMDS rates on ICL+

2022-04-08T11:58:48Z

commit 9cddf03b2af07443bebdc73cba21acb360c079e8 upstream. ICL+ PLLs can't genenerate certain frequencies. Running the PLL algorithms through for all frequencies 25-594MHz we see a gap just above 500 MHz. Specifically 500-522.8MHZ for TC PLLs, and 500-533.2 MHz for combo PHY PLLs. Reject those frequencies hdmi_port_clock_valid() so that we properly filter out unsupported modes and/or color depths for HDMI. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5247 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220311212845.32358-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola (cherry picked from commit e5086cb3f3d3f94091be29eec38cf13f8a75a778) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix PSF GV point mask when SAGV is not possible

2022-04-08T11:58:48Z

commit 3ef8b5e19ead5a79600ea55f9549658281415893 upstream. Don't just mask off all the PSF GV points when SAGV gets disabled. This should in fact cause the Pcode to reject the request since at least one PSF point must remain enabled at all times. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-7-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy (cherry picked from commit 0fed4ddd18f064d2359b430c6e83ee60dd1f49b1) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman

drm/i915/display: Do not re-enable PSR after it was marked as not reliable

2022-04-08T11:58:19Z

[ Upstream commit 278da06c03655c2bb9bc36ebdf45b90a079b3bfd ] If a error happens and sink_not_reliable is set, PSR should be disabled for good but that is not happening. It would be disabled by the function handling the PSR error but then on the next fastset it would be enabled again in _intel_psr_post_plane_update(). It would only be disabled for good in the next modeset where has_psr will be set false. v2: - release psr lock before continue Fixes: 9ce5884e5139 ("drm/i915/display: Only keep PSR enabled if there is active planes") Reported-by: Khaled Almahallawy Reported-by: Charlton Lin Cc: Jouni Högander Signed-off-by: José Roberto de Souza Reviewed-by: Jouni Högander Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-2-jose.souza@intel.com (cherry picked from commit 15f26bdc81f7f03561aaea5a10d87bd6638e1459) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin

drm/i915/display: Fix HPD short pulse handling for eDP

2022-04-08T11:58:19Z

[ Upstream commit 3a84fd1ed53582b31e843a152ee3219e9e4ccb8c ] Commit 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off") completely broke short pulse handling for eDP as it is usually generated by sink when it is displaying image and there is some error or status that source needs to handle. When power panel is enabled, this state is enough to power aux transactions and VDD override is disabled, so intel_pps_have_power() is always returning false causing short pulses to be ignored. So here better naming this function that intends to check if aux lines are powered to avoid the endless cycle mentioned in the commit being fixed and fixing the check for what it is intended. v2: - renamed to intel_pps_have_panel_power_or_vdd() - fixed indentation Fixes: 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off") Cc: Anshuman Gupta Cc: Jani Nikula Cc: Uma Shankar Cc: Ville Syrjälä Reviewed-by: Ville Syrjälä Signed-off-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-1-jose.souza@intel.com (cherry picked from commit 8f0c1c0949b609acfad62b8d5f742a3b5e7b05ab) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin

drm/edid: Split deep color modes between RGB and YUV444

2022-04-08T11:57:57Z

[ Upstream commit 4adc33f36d80489339f1b43dfeee96bb9ea8e459 ] The current code assumes that the RGB444 and YUV444 formats are the same, but the HDMI 2.0 specification states that: The three DC_XXbit bits above only indicate support for RGB 4:4:4 at that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4 is supported for all modes indicated by the DC_XXbit flags. So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444 flag isn't, we'll assume that we support that deep colour mode for YUV444 which breaks the specification. In order to fix this, let's split the edid_hdmi_dc_modes field in struct drm_display_info into two fields, one for RGB444 and one for YUV444. Suggested-by: Ville Syrjälä Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.") Signed-off-by: Maxime Ripard Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-4-maxime@cerno.tech Signed-off-by: Sasha Levin