<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel.git/drivers/gpu/drm/bridge/adv7511, branch linux-5.1.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.
</subtitle>
<id>https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.1.y</id>
<link rel='self' href='https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.1.y'/>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/'/>
<updated>2019-06-15T09:52:54Z</updated>
<entry>
<title>drm/bridge: adv7511: Fix low refresh rate selection</title>
<updated>2019-06-15T09:52:54Z</updated>
<author>
<name>Matt Redfearn</name>
</author>
<published>2019-04-24T13:22:27Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=06cd48e175913fd19600d9402d0382f83985d879'/>
<id>urn:sha1:06cd48e175913fd19600d9402d0382f83985d879</id>
<content type='text'>
[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode-&gt;vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Matt Redfearn &lt;matt.redfearn@thinci.com&gt;
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>drm: Split out drm_probe_helper.h</title>
<updated>2019-01-24T12:20:42Z</updated>
<author>
<name>Daniel Vetter</name>
</author>
<published>2019-01-17T21:03:34Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=fcd70cd36b9bf697122538c9e38e8cf954b2342b'/>
<id>urn:sha1:fcd70cd36b9bf697122538c9e38e8cf954b2342b</id>
<content type='text'>
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h &gt; drm_modeset_helper.h -&gt; drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
  other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.

Acked-by: Harry Wentland &lt;harry.wentland@amd.com&gt;
Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Cc: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Cc: Jani Nikula &lt;jani.nikula@linux.intel.com&gt;
Cc: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Acked-by: Rodrigo Vivi &lt;rodrigo.vivi@intel.com&gt;
Acked-by: Benjamin Gaignard &lt;benjamin.gaignard@linaro.org&gt;
Acked-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
Acked-by: Neil Armstrong &lt;narmstrong@baylibre.com&gt;
Acked-by: Oleksandr Andrushchenko &lt;oleksandr_andrushchenko@epam.com&gt;
Acked-by: CK Hu &lt;ck.hu@mediatek.com&gt;
Acked-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Acked-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt;
Signed-off-by: Daniel Vetter &lt;daniel.vetter@intel.com&gt;
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
</content>
</entry>
<entry>
<title>drm: bridge: Constify mode arguments to bridge .mode_set() operation</title>
<updated>2019-01-14T01:51:14Z</updated>
<author>
<name>Laurent Pinchart</name>
</author>
<published>2018-04-06T14:39:01Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=63f8f3badf799c8b63ff33a489886bc138ce5d09'/>
<id>urn:sha1:63f8f3badf799c8b63ff33a489886bc138ce5d09</id>
<content type='text'>
The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.

Signed-off-by: Laurent Pinchart &lt;laurent.pinchart+renesas@ideasonboard.com&gt;
Reviewed-by: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
</content>
</entry>
<entry>
<title>Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm</title>
<updated>2018-08-16T00:39:07Z</updated>
<author>
<name>Linus Torvalds</name>
</author>
<published>2018-08-16T00:39:07Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=54dbe75bbf1e189982516de179147208e90b5e45'/>
<id>urn:sha1:54dbe75bbf1e189982516de179147208e90b5e45</id>
<content type='text'>
Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.19.

  Rob has some new hardware support for new qualcomm hw that I'll send
  along separately. This has the display part of it, the remaining pull
  is for the acceleration engine.

  This also contains a wound-wait/wait-die mutex rework, Peter has acked
  it for merging via my tree.

  Otherwise mostly the usual level of activity. Summary:

  core:
   - Wound-wait/wait-die mutex rework
   - Add writeback connector type
   - Add "content type" property for HDMI
   - Move GEM bo to drm_framebuffer
   - Initial gpu scheduler documentation
   - GPU scheduler fixes for dying processes
   - Console deferred fbcon takeover support
   - Displayport support for CEC tunneling over AUX

  panel:
   - otm8009a panel driver fixes
   - Innolux TV123WAM and G070Y2-L01 panel driver
   - Ilitek ILI9881c panel driver
   - Rocktech RK070ER9427 LCD
   - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
   - DLC DLC0700YZG-1
   - BOE HV070WSA-100
   - newhaven, nhd-4.3-480272ef-atxl LCD
   - DataImage SCF0700C48GGU18
   - Sharp LQ035Q7DB03
   - p079zca: Refactor to support multiple panels

  tinydrm:
   - ILI9341 display panel

  New driver:
   - vkms - virtual kms driver to testing.

  i915:
   - Icelake:
        Display enablement
        DSI support
        IRQ support
        Powerwell support
   - GPU reset fixes and improvements
   - Full ppgtt support refactoring
   - PSR fixes and improvements
   - Execlist improvments
   - GuC related fixes

  amdgpu:
   - Initial amdgpu documentation
   - JPEG engine support on VCN
   - CIK uses powerplay by default
   - Move to using core PCIE functionality for gens/lanes
   - DC/Powerplay interface rework
   - Stutter mode support for RV
   - Vega12 Powerplay updates
   - GFXOFF fixes
   - GPUVM fault debugging
   - Vega12 GFXOFF
   - DC improvements
   - DC i2c/aux changes
   - UVD 7.2 fixes
   - Powerplay fixes for Polaris12, CZ/ST
   - command submission bo_list fixes

  amdkfd:
   - Raven support
   - Power management fixes

  udl:
   - Cleanups and fixes

  nouveau:
   - misc fixes and cleanups.

  msm:
   - DPU1 support display controller in sdm845
   - GPU coredump support.

  vmwgfx:
   - Atomic modesetting validation fixes
   - Support for multisample surfaces

  armada:
   - Atomic modesetting support completed.

  exynos:
   - IPPv2 fixes
   - Move g2d to component framework
   - Suspend/resume support cleanups
   - Driver cleanups

  imx:
   - CSI configuration improvements
   - Driver cleanups
   - Use atomic suspend/resume helpers
   - ipu-v3 V4L2 XRGB32/XBGR32 support

  pl111:
   - Add Nomadik LCDC variant

  v3d:
   - GPU scheduler jobs management

  sun4i:
   - R40 display engine support
   - TCON TOP driver

  mediatek:
   - MT2712 SoC support

  rockchip:
   - vop fixes

  omapdrm:
   - Workaround for DRA7 errata i932
   - Fix mm_list locking

  mali-dp:
   - Writeback implementation
        PM improvements
   - Internal error reporting debugfs

  tilcdc:
   - Single fix for deferred probing

  hdlcd:
   - Teardown fixes

  tda998x:
   - Converted to a bridge driver.

  etnaviv:
   - Misc fixes"

* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
  drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
  drm/scheduler: fix param documentation
  drm/i2c: tda998x: correct PLL divider calculation
  drm/i2c: tda998x: get rid of private fill_modes function
  drm/i2c: tda998x: move mode_valid() to bridge
  drm/i2c: tda998x: register bridge outside of component helper
  drm/i2c: tda998x: cleanup from previous changes
  drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
  drm/i2c: tda998x: convert to bridge driver
  drm/scheduler: fix timeout worker setup for out of order job completions
  drm/amd/display: display connected to dp-1 does not light up
  drm/amd/display: update clk for various HDMI color depths
  drm/amd/display: program display clock on cache match
  drm/amd/display: Add NULL check for enabling dp ss
  drm/amd/display: add vbios table check for enabling dp ss
  drm/amd/display: Don't share clk source between DP and HDMI
  drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
  drm/amd/display: Use calculated disp_clk_khz value for dce110
  drm/amd/display: Implement custom degamma lut on dcn
  drm/amd/display: Destroy aux_engines only once
  ...
</content>
</entry>
<entry>
<title>drm: drop _mode_ from drm_mode_connector_attach_encoder</title>
<updated>2018-07-13T16:40:27Z</updated>
<author>
<name>Daniel Vetter</name>
</author>
<published>2018-07-09T08:40:07Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=cde4c44d8769c1be16074c097592c46c7d64092b'/>
<id>urn:sha1:cde4c44d8769c1be16074c097592c46c7d64092b</id>
<content type='text'>
Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.

Reviewed-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Signed-off-by: Daniel Vetter &lt;daniel.vetter@intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
</content>
</entry>
<entry>
<title>drm: drop _mode_ from update_edit_property()</title>
<updated>2018-07-13T16:40:27Z</updated>
<author>
<name>Daniel Vetter</name>
</author>
<published>2018-07-09T08:40:06Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=c555f02371c338b06752577aebf738dbdb6907bd'/>
<id>urn:sha1:c555f02371c338b06752577aebf738dbdb6907bd</id>
<content type='text'>
Just makes it longer, and for most things in drm_connector.[hc] we
just use the drm_connector_ prefix. Done with sed + a bit of manual
fixup for the indenting.

Reviewed-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Signed-off-by: Daniel Vetter &lt;daniel.vetter@intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
</content>
</entry>
<entry>
<title>drm/bridge: adv7511: Reset registers on hotplug</title>
<updated>2018-07-09T17:05:55Z</updated>
<author>
<name>Sean Paul</name>
</author>
<published>2018-07-03T16:56:03Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=5f3417569165a8ee57654217f73e0160312f409c'/>
<id>urn:sha1:5f3417569165a8ee57654217f73e0160312f409c</id>
<content type='text'>
The bridge loses its hw state when the cable is unplugged. If we detect
this case in the hpd handler, reset its state.

Reported-by: Rob Clark &lt;robdclark@gmail.com&gt;
Tested-by: Rob Clark &lt;robdclark@gmail.com&gt;
Reviewed-by: Archit Taneja &lt;architt@codeaurora.org&gt;
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org
</content>
</entry>
<entry>
<title>gpu: drm: bridge: adv7511: Replace mdelay with usleep_range in adv7511_probe</title>
<updated>2018-05-04T06:00:51Z</updated>
<author>
<name>Jia-Ju Bai</name>
</author>
<published>2018-04-11T08:33:42Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=5f27314141757794378abb2907fb7116947d644b'/>
<id>urn:sha1:5f27314141757794378abb2907fb7116947d644b</id>
<content type='text'>
adv7511_probe() is never called in atomic context.
This function is only set as ".probe" in struct i2c_driver.

Despite never getting called from atomic context, adv7511_probe()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai &lt;baijiaju1990@gmail.com&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Archit Taneja &lt;architt@codeaurora.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/1523435622-4329-1-git-send-email-baijiaju1990@gmail.com
</content>
</entry>
<entry>
<title>drm/bridge: adv7511: fix spelling of driver name in Kconfig</title>
<updated>2018-05-04T05:59:03Z</updated>
<author>
<name>Peter Rosin</name>
</author>
<published>2018-04-26T21:36:44Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=7bd2d2ecedff26b3a87b026b98acc4b7110c9ee6'/>
<id>urn:sha1:7bd2d2ecedff26b3a87b026b98acc4b7110c9ee6</id>
<content type='text'>
Could perhaps prevent some confusion.

Signed-off-by: Peter Rosin &lt;peda@axentia.se&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Archit Taneja &lt;architt@codeaurora.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20180426213644.29318-1-peda@axentia.se
</content>
</entry>
<entry>
<title>drm/bridge: adv7511: fix mode_valid's return type</title>
<updated>2018-04-25T07:09:22Z</updated>
<author>
<name>Luc Van Oostenryck</name>
</author>
<published>2018-04-24T13:14:47Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=0e19b023414e9f8f75e9b5aafda585ca490a70bb'/>
<id>urn:sha1:0e19b023414e9f8f75e9b5aafda585ca490a70bb</id>
<content type='text'>
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck &lt;luc.vanoostenryck@gmail.com&gt;
Signed-off-by: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com
</content>
</entry>
</feed>
