kernel.git/drivers/gpu/drm/amd/display/dc/inc, branch linux-6.14.y

drm/amd/display: Populate register address for dentist for dcn401

2025-05-29T09:13:28Z

[ Upstream commit 5f0d1ef6f16e150ee46cc00b8d233d9d271fe39e ] [WHY&HOW] Address was not previously populated which can result in incorrect clock frequencies being read on boot. Reviewed-by: Alvin Lee Signed-off-by: Dillon Varone Signed-off-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Increase block_sequence array size

2025-05-29T09:13:28Z

[ Upstream commit 3a7810c212bcf2f722671dadf4b23ff70a7d23ee ] [Why] It's possible to generate more than 50 steps in hwss_build_fast_sequence, for example with a 6-pipe asic where all pipes are in one MPC chain. This overflows the block_sequence buffer and corrupts block_sequence_steps, causing a crash. [How] Expand block_sequence to 100 items. A naive upper bound on the possible number of steps for a 6-pipe asic, ignoring the potential for steps to be mutually exclusive, is 91 with current code, therefore 100 is sufficient. Reviewed-by: Alvin Lee Signed-off-by: Joshua Aberback Signed-off-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Reverse the visual confirm recouts

2025-05-29T09:13:28Z

[ Upstream commit 3c50bf2196aaddcaffe2c7a1a7080470380cbfdd ] [WHY] When checking if a pipe can disable cursor to prevent duplicate cursors, having visual confirm on will prevent disabling cursors on planes which cover the bottom of the screen. [HOW] When checking if a plane can disable visual confirm, the pipe first reverses these calculations before doing the checks. Reviewed-by: Alvin Lee Signed-off-by: Peterson Guo Signed-off-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix BT2020 YCbCr limited/full range input

2025-05-29T09:13:15Z

[ Upstream commit 07bc2dcbcf403d47d6f305ef7f0d3d489491c5fb ] [Why] BT2020 YCbCr input is not handled properly when full range quantization is used and limited range is not supported at all. [How] - Add enums for BT2020 YCbCr limited/full range - Add limited range CSC matrix Reviewed-by: Krunoslav Kovac Signed-off-by: Ilya Bakoulin Signed-off-by: Roman Li Tested-by: Robert Mader Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Add hubp cache reset when powergating

2025-01-24T14:56:22Z

[Why] When HUBP is power gated, the SW state can get out of sync with the hardware state causing cursor to not be programmed correctly. [How] Similar to DPP, add a HUBP reset function which is called wherever HUBP is initialized or powergated. This function will clear the cursor position and attribute cache allowing for proper programming when the HUBP is brought back up. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Sung Lee Signed-off-by: Aric Cyr Signed-off-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Add support to configure CRC window on specific CRC instance

2025-01-10T17:03:45Z

[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu Signed-off-by: Wayne Lin Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: DML2.1 Post-Si Cleanup

2025-01-10T17:00:34Z

[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng Reviewed-by: Dillon Varone Signed-off-by: Rafal Ostrowski Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Log Hard Min Clocks and Phantom Pipe Status

2025-01-10T16:59:27Z

[WHY] On entering/exiting idle power, certain parameters would be very useful to know for power profiling purposes. [HOW] This commit adds certain hard min clocks and pipe types to log output on idle optimization enter/exit. Reviewed-by: Alvin Lee Signed-off-by: Sung Lee Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: Update dc_tiling_info union to structure

2025-01-06T19:44:27Z

[WHY] The `dc_tiling_info` union previously did not have a field to specify the active GFX format, assuming only one format would be used per DCN version. from DCN4+, support for switching between different GFX formats is introduced, requiring a way to track which format is currently in use. [HOW] Updated the `dc_tiling_info` union to include a new field that explicitly indicates the currently used GFX format. This allows the system to determine the active GFX format and take the correct programming path accordingly. [Description] The union `dc_tiling_info` has been updated to support multiple GFX formats by adding a new field for identifying the active format. This update ensures that the correct programming path is followed based on the selected format. All references to `dc_tiling_info` in the codebase have been updated to reflect the new structure. Reviewed-by: Alvin Lee Signed-off-by: Karthi Kandasamy Signed-off-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher

drm/amd/display: have pretrain for dpia

2025-01-06T19:44:27Z

[WHY] We like to have pretrain for dpia link so that dp and dp tunneling have aligned behavior. The Main difficult for dpia pretrain is that encoder can not get corresponded dpia port when link detection in current implementation. [HOW] 1. create enable/disable dpia output functions for dcn35 encoder and have dpia_id and other necessary info as inputs. 2. dcn35 dpia use the new functions to enable/disable output. 3. have a option to enable/disable the change. Reviewed-by: Wenjing Liu Reviewed-by: Meenakshikumar Somasundaram Signed-off-by: Peichen Huang Signed-off-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher