kernel.git/drivers/gpu/drm/amd/display/dc/calcs, branch linux-5.14.y

drm/amd/display: Add support for SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616.

2021-05-27T19:00:47Z

Add the necessary format definition, bandwidth and pixel size mappings, prescaler setup, and pixelformat selection, following the logic already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616. The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped red <-> green color channel, by use of the hardware xbar. Please note that on the DCN 1/2/3 display engines, the pixelformat in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from format id 22 to id 26. See amd/include/navi10_enum.h for the meaning of the id's. For format 22, the display engine read the framebuffer in 16 bpc format, but truncated to the 12 bpc actually supported by later pipeline stages. However, the engine took the 12 LSB of each color component for truncation, which is incompatible with rendering at least under Vulkan, where content is 16 bit wide, and a 12 MSB alignment would be appropriate, if any. Format 20 for ARGB16161616_12MSB does work, but even better, we can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around until later stages of the display pipeline. This allows to directly consume what the rendering hw produces under Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested with a patched version of the current AMD open-source amdvlk driver which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto DRM_FORMAT_XBGR16161616. The old id 22 would cause colorful pixeltrash to be displayed instead. Tested under DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner Signed-off-by: Alex Deucher

drm/amd/display/dc/calcs/dce_calcs: Remove some large variables from the stack

2021-04-09T20:38:16Z

Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs_init’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2726:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=] v2: squash in sizeof fix Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: "Christian König" Cc: David Airlie Cc: Daniel Vetter Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland Signed-off-by: Lee Jones Signed-off-by: Alex Deucher

drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap

2021-04-09T20:38:12Z

Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2016:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: "Christian König" Cc: David Airlie Cc: Daniel Vetter Cc: Colin Ian King Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland Signed-off-by: Lee Jones Signed-off-by: Alex Deucher

drm/amd/display/dc/calcs/dce_calcs: Demote non-conformant kernel-doc function headers

2021-01-14T18:20:20Z

Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2753: warning: Function parameter or member 'vbios' not described in 'is_display_configuration_supported' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2753: warning: Function parameter or member 'calcs_output' not described in 'is_display_configuration_supported' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'ctx' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'dceip' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'vbios' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'pipe' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'pipe_count' not described in 'bw_calcs' drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3030: warning: Function parameter or member 'calcs_output' not described in 'bw_calcs' Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: "Christian König" Cc: David Airlie Cc: Daniel Vetter Cc: Lee Jones Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones Signed-off-by: Alex Deucher

drm/amd/display/dc/calcs/dce_calcs: Remove unused variables 'v_filter_init_mode' and 'sclk_lvl'

2021-01-14T18:20:20Z

Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:109:18: warning: variable ‘v_filter_init_mode’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs’: drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:3031:21: warning: variable ‘sclk_lvl’ set but not used [-Wunused-but-set-variable] Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: "Christian König" Cc: David Airlie Cc: Daniel Vetter Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones Signed-off-by: Alex Deucher

drm/amdgpu/display: drop DCN support for aarch64

2021-01-05T16:35:53Z

From Ard: "Simply disabling -mgeneral-regs-only left and right is risky, given that the standard AArch64 ABI permits the use of FP/SIMD registers anywhere, and GCC is known to use SIMD registers for spilling, and may invent other uses of the FP/SIMD register file that have nothing to do with the floating point code in question. Note that putting kernel_neon_begin() and kernel_neon_end() around the code that does use FP is not sufficient here, the problem is in all the other code that may be emitted with references to SIMD registers in it. So the only way to do this properly is to put all floating point code in a separate compilation unit, and only compile that unit with -mgeneral-regs-only." Disable support until the code can be properly refactored to support this properly on aarch64. Acked-by: Will Deacon Reported-by: Ard Biesheuvel Signed-off-by: Alex Deucher

drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)

2020-11-04T22:11:37Z

Avoids confusion in configurations. v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled v3: rebase on latest code Reviewed-by: Luben Tuikov (v1) Signed-off-by: Alex Deucher

drm/amd: fix typoes

2020-11-02T20:33:46Z

Fix typoes. Acked-by: Christian König Signed-off-by: Bernard Zhao Signed-off-by: Alex Deucher

drm/amd/display: remove useless if/else

2020-10-30T05:02:13Z

Fix the following coccinelle report: ./drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:1367:3-5: WARNING: possible condition with no effect (if == else) Both branches are the same, so remove the if/else altogether. Fixes: 81875979f0b2 ("drm/amd/display: Remove extra pairs of parentheses in dce_calcs.c") Reported-by: Hulk Robot Signed-off-by: Zou Wei Signed-off-by: Alex Deucher

drm/amd/display: correct asic type check V2

2020-10-27T16:01:16Z

Check chip family also to avoid wrong identification. V2: use the correct macro without AMDGPU prefix Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher