kernel.git/drivers/gpio/gpiolib.c, branch linux-4.16.y

gpio: fix error path in lineevent_create

2018-05-16T08:12:29Z

commit f001cc351ad3309ec8736c374e90e5a4bc472d41 upstream. If gpiod_request() fails the cleanup must not call gpiod_free(). Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

gpioib: do not free unrequested descriptors

2018-05-16T08:12:29Z

commit ab3dbcf78f60f46d6a0ad63b1f4b690b7a427140 upstream. If the main loop in linehandle_create() encounters an error, it unwinds completely by freeing all previously requested GPIO descriptors. However, if the error occurs in the beginning of the loop before that GPIO is requested, then the exit code attempts to free a null descriptor. If extrachecks is enabled, gpiod_free() triggers a WARN_ON. Instead, keep a separate count of legitimate GPIOs so that only those are freed. Cc: stable@vger.kernel.org Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Reviewed-by: Bjorn Andersson Signed-off-by: Timur Tabi Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2018-01-31T20:25:27Z

Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using to just use as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...

Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-01-31T01:58:07Z

Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...

gpio: Timestamp events in hardirq handler

2018-01-23T13:43:57Z

Add a hardirq handler to the GPIO userspace event loop, making sure to pick up the timestamp there, as close as possible in time relative to the actual event causing the interrupt. Tested with a simple pushbutton GPIO on ux500 and seems to work fine. Cc: Bartosz Golaszewski Reviewed-by: Felipe Balbi Reported-by: Felipe Balbi Signed-off-by: Linus Walleij

gpio: Fix kernel stack leak to userspace

2018-01-23T13:43:45Z

The GPIO event descriptor was leaking kernel stack to userspace because we don't zero the variable before use. Ooops. Fix this. Cc: stable@vger.kernel.org Reported-by: Arnd Bergmann Reviewed-by: Bartosz Golaszewski Reviewed-by: Arnd Bergmann Signed-off-by: Linus Walleij

gpiolib: remove redundant initialization of pointer desc

2018-01-17T06:44:16Z

The initialized value stored in pointer desc is never read as it is updated in the first executable statement in the function. This is therefore redundant and can be removed. Cleans up clang warning: drivers/gpio/gpiolib.c:3710:20: warning: Value stored to 'desc' during its initialization is never read Signed-off-by: Colin Ian King Signed-off-by: Linus Walleij

gpio: No NULL owner

2018-01-17T06:44:14Z

Sometimes a GPIO is fetched with NULL as parent device, and that is just fine. So under these circumstances, avoid using dev_name() to provide a name for the GPIO line. Signed-off-by: Linus Walleij

gpio: Export devm_gpiod_get_from_of_node() for consumers

2018-01-12T10:05:24Z

We have been holding back on adding an API for fetching GPIO handles directly from device nodes, strongly preferring to get it from the spawn devices instead. The fwnode interface however already contains an API for doing this, as it is used for opaque device tree nodes or ACPI nodes for getting handles to LEDs and keys that use GPIO: those are specified as one child per LED/key in the device tree and are not individual devices. However regulators present a special problem as they already have helper functions to traverse the device tree from a regulator node and two levels down to fill in data, and as it already traverses GPIO nodes in its own way, and already holds a pointer to each regulators device tree node, it makes most sense to export an API to fetch the GPIO descriptor directly from the node. We only support the devm_* version for now, hopefully no non-devres version will be needed. Signed-off-by: Linus Walleij