kernel.git/drivers/gpio/Kconfig, branch linux-2.6.36.y

gpio: Add STMPE GPIO driver

2010-08-12T09:27:55Z

Add support for the GPIOs on STMPE I/O Expanders. [l.fu@pengutronix.de: fix set direction input] [l.fu@pengutronix.de: set GPIO alternate function while requesting] Acked-by: Luotao Fu Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Samuel Ortiz

gpio: sx150x: add Semtech I2C sx150x gpio expander driver

2010-08-11T15:59:09Z

Add support for Semtech SX150-series I2C GPIO expanders. Compatible models include: 8 bits: sx1508q 16 bits: sx1509q Signed-off-by: Gregory Bean Cc: David Brownell Cc: Jean Delvare Cc: Trilok Soni Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers/gpio is platform-neutral

2010-06-29T22:29:32Z

Update Kconfig and Makefile in drivers/gpio to discourage inappropriate addition of platform-specific code. [akpm@linux-foundation.org: fix tpyo] Signed-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

gpio: rdc321x needs to select MFD_CORE

2010-05-27T23:37:48Z

Fix rdc321x-southbridge build: GPIO_RDC321X needs to select MFD_CORE so that the core is built at the same (or higher) tristate level. rdc321x-southbridge.c:(.devinit.text+0x6103): undefined reference to `mfd_add_devices' rdc321x-southbridge.c:(.devexit.text+0xe5f): undefined reference to `mfd_remove_devices' Signed-off-by: Randy Dunlap Cc: Florian Fainelli Signed-off-by: Samuel Ortiz

gpio: Add TC35892 GPIO driver

2010-05-27T23:37:43Z

Add a GPIO driver to support the GPIOs on the TC35892 I/O Expander. Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Samuel Ortiz

gpio: Add support for Janz VMOD-TTL Digital IO module

2010-05-27T23:37:33Z

The Janz VMOD-TTL is a MODULbus daughterboard which fits onto any MODULbus carrier board. It essentially consists of some various logic and a Zilog Z8536 CIO Counter/Timer and Parallel IO Unit. The board must be physically configured with jumpers to enable a user to drive output signals. I am only interested in outputs, so I have made this driver as simple as possible. It only supports a very minimal subset of the features provided by the Z8536 chip. Signed-off-by: Ira W. Snyder Signed-off-by: Samuel Ortiz

gpio: Add support for RDC321x GPIO controller

2010-05-27T23:37:29Z

This patch adds a new GPIO driver for the RDC321x SoC GPIO controller. Signed-off-by: Florian Fainelli Signed-off-by: Samuel Ortiz

gpio: add Penwell gpio support

2010-05-27T16:12:42Z

Intel Penwell chip has two 96 pins GPIO blocks, which are very similiar as Intel Langwell chip GPIO block, except for pin number difference. This patch expends the original Langwell GPIO driver to support Penwell's. Signed-off-by: Alek Du Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

gpio: add interrupt handling capability to max732x

2010-05-27T16:12:41Z

Most of the GPIO expanders supported by the max732x driver have interrupt generation capability by reporting changes on input pins through an INT# pin. This patch implements the irq_chip functionnality (edge detection only). Signed-off-by: Marc Zyngier Cc: Eric Miao Cc: Jebediah Huang Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mfd: Fix lpc_sch related depends/selects, fix build error

2010-03-07T21:17:38Z

LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap Cc: Denis Turischev Signed-off-by: Samuel Ortiz