kernel.git/drivers/firmware/xilinx, branch linux-5.11.y

firmware: xilinx: Fix dereferencing freed memory

2021-05-14T08:49:33Z

[ Upstream commit f1f21bece82c76a56a96988ec7d51ccc033d8949 ] Fix smatch warning: drivers/firmware/xilinx/zynqmp.c:1288 zynqmp_firmware_remove() error: dereferencing freed memory 'feature_data' Use hash_for_each_safe for safe removal of hash entry. Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Tejas Patel Signed-off-by: Rajan Vaja Link: https://lore.kernel.org/r/1612765883-22018-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Michal Simek Signed-off-by: Sasha Levin

Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-12-17T00:38:41Z

Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...

firmware: xilinx: Mark pm_api_features_map with static keyword

2020-12-09T22:00:22Z

Fix the following sparse warning: drivers/firmware/xilinx/zynqmp.c:32:1: warning: symbol 'pm_api_features_map' was not declared. Should it be static? Signed-off-by: Zou Wei Link: https://lore.kernel.org/r/1606823513-121578-1-git-send-email-zou_wei@huawei.com Signed-off-by: Michal Simek Signed-off-by: Arnd Bergmann

firmware: xilinx: Fix kernel-doc warnings

2020-12-09T18:36:34Z

kernel-doc is reporting some style issues. The patch is fixing them. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/e606233d15bfdc594535dd34eb85472b42f61830.1606832997.git.michal.simek@xilinx.com

firmware: xilinx: Use hash-table for api feature check

2020-11-24T14:13:54Z

Currently array of fix length PM_API_MAX is used to cache the pm_api version (valid or invalid). However ATF based PM APIs values are much higher then PM_API_MAX. So to include ATF based PM APIs also, use hash-table to store the pm_api version status. Signed-off-by: Amit Sunil Dhamne Reported-by: Arnd Bergmann Signed-off-by: Ravi Patel Signed-off-by: Rajan Vaja Reviewed-by: Arnd Bergmann Tested-by: Michal Simek Fixes: f3217d6f2f7a ("firmware: xilinx: fix out-of-bounds access") Cc: stable Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Michal Simek

firmware: xilinx: Fix SD DLL node reset issue

2020-11-24T14:09:08Z

Fix the SD DLL node reset issue where incorrect node is being referenced instead of SD DLL node. Fixes: 426c8d85df7a ("firmware: xilinx: Use APIs instead of IOCTLs") Signed-off-by: Manish Narani Link: https://lore.kernel.org/r/1605534744-15649-1-git-send-email-manish.narani@xilinx.com Signed-off-by: Michal Simek

firmware: xilinx: fix out-of-bounds access

2020-11-09T17:35:35Z

The zynqmp_pm_set_suspend_mode() and zynqmp_pm_get_trustzone_version() functions pass values as api_id into zynqmp_pm_invoke_fn that are beyond PM_API_MAX, resulting in an out-of-bounds access: drivers/firmware/xilinx/zynqmp.c: In function 'zynqmp_pm_set_suspend_mode': drivers/firmware/xilinx/zynqmp.c:150:24: warning: array subscript 2562 is above array bounds of 'u32[64]' {aka 'unsigned int[64]'} [-Warray-bounds] 150 | if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED) | ~~~~~~~~~~~~~~~~~~^~~~~~~~ drivers/firmware/xilinx/zynqmp.c:28:12: note: while referencing 'zynqmp_pm_features' 28 | static u32 zynqmp_pm_features[PM_API_MAX]; | ^~~~~~~~~~~~~~~~~~ Replace the resulting undefined behavior with an error return. This may break some things that happen to work at the moment but seems better than randomly overwriting kernel data. I assume we need additional fixes for the two functions that now return an error. Fixes: 76582671eb5d ("firmware: xilinx: Add Zynqmp firmware driver") Fixes: e178df31cf41 ("firmware: xilinx: Implement ZynqMP power management APIs") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20201026155449.3703142-1-arnd@kernel.org Cc: stable Signed-off-by: Greg Kroah-Hartman

firmware: xilinx: Fix an error handling path in 'zynqmp_firmware_probe()'

2020-05-15T14:20:02Z

If 'mfd_add_devices()' fails, we must undo 'zynqmp_pm_api_debugfs_init()' otherwise some debugfs directory and files will be left. Just move the call to 'zynqmp_pm_api_debugfs_init()' a few lines below to fix the issue. Fixes: e23d9c6d0d49 ("drivers: soc: xilinx: Add ZynqMP power domain driver") Signed-off-by: Christophe JAILLET Reviewed-by: Jolly Shah Link: https://lore.kernel.org/r/20200510130357.233364-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

firmware: xilinx: Export zynqmp_pm_fpga_{get_status,load}

2020-05-04T07:15:00Z

When building arm64 allmodconfig: ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined! ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined! These functions were added to drivers/fpga/zynqmp-fpga.c but not exported so the module build breaks. Export them so that they can be used in modules properly. Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs") Signed-off-by: Nathan Chancellor Reported-by: "kernelci.org bot" Reported-by: Stephen Rothwell Link: https://lore.kernel.org/r/20200502025958.2714249-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman

firmware: xilinx: Add sysfs and API to set boot health status

2020-04-28T13:46:54Z

Add sysfs interface to set boot health status from user space. Add API used by this interface to communicate with firmware. If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the healthy bit on FPD WDT expiration. If healthy bit is set by a user application running in Linux, PMUFW will do APU only restart. If healthy bit is not set during FPD WDT expiration, PMUFW will do system restart. Signed-off-by: Rajan Vaja Signed-off-by: Michal Simek Signed-off-by: Tejas Patel Signed-off-by: Jolly Shah Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman