kernel.git/drivers/firmware/imx, branch linux-5.6.y

firmware: imx: scu: Fix corruption of header

2020-06-17T14:42:01Z

[ Upstream commit f5f27b79eab80de0287c243a22169e4876b08d5e ] The header of the message to send can be changed if the response is longer than the request: - 1st word, the header is sent - the remaining words of the message are sent - the response is received asynchronously during the execution of the loop, changing the size field in the header - the for loop test the termination condition using the corrupted header It is the case for the API build_info which has just a header as request but 3 words in response. This issue is fixed storing the header locally instead of using a pointer on it. Fixes: edbee095fafb (firmware: imx: add SCU firmware driver support) Signed-off-by: Franck LENORMAND Reviewed-by: Leonard Crestez Signed-off-by: Leonard Crestez Cc: stable@vger.kernel.org Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: imx-scu: Support one TX and one RX

2020-06-17T14:42:01Z

[ Upstream commit f25a066d1a07affb7bea4e5d9c179c3338338e23 ] Current imx-scu requires four TX and four RX to communicate with SCU. This is low efficient and causes lots of mailbox interrupts. With imx-mailbox driver could support one TX to use all four transmit registers and one RX to use all four receive registers, imx-scu could use one TX and one RX. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: imx: Align imx_sc_msg_req_cpu_start to 4

2020-02-24T07:27:48Z

The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: d90bf296ae18 ("firmware: imx: Add support to start/stop a CPU") Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo

firmware: imx: scu-pd: Align imx sc msg structs to 4

2020-02-24T07:26:55Z

The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: c800cd7824bd ("firmware: imx: add SCU power domain driver") Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo

firmware: imx: misc: Align imx sc msg structs to 4

2020-02-24T07:26:44Z

The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y: BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0 It shouldn't cause an issues in normal use because these structs are always allocated on the stack. Fixes: 15e1f2bc8b3b ("firmware: imx: add misc svc support") Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo

firmware: imx: scu: Ensure sequential TX

2020-02-24T07:02:25Z

SCU requires that all messages words are written sequentially but linux MU driver implements multiple independent channels for each register so ordering between different channels must be ensured by SCU API interface. Wait for tx_done before every send to ensure that no queueing happens at the mailbox channel level. Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support") Signed-off-by: Leonard Crestez Cc: Reviewed-by: Peng Fan Reviewed-by:: Oleksij Rempel Signed-off-by: Shawn Guo

firmware: imx: Allow IMX DSP to be selected as module

2020-01-09T09:21:33Z

IMX DSP is only needed by SOF or any other module that wants to communicate with the DSP. When SOF is build as a module IMX DSP is forced to be built inside the kernel image. This is not optimal, so allow IMX DSP to be built as a module. Signed-off-by: Daniel Baluta Signed-off-by: Shawn Guo

firmware: imx: add missing include of

2019-10-28T06:50:09Z

Include for the declarations of the functions exported from this driver. This fixes the following sparse warnings: drivers/firmware/imx/imx-scu-irq.c:45:5: warning: symbol 'imx_scu_irq_register_notifier' was not declared. Should it be static? drivers/firmware/imx/imx-scu-irq.c:52:5: warning: symbol 'imx_scu_irq_unregister_notifier' was not declared. Should it be static? drivers/firmware/imx/imx-scu-irq.c:97:5: warning: symbol 'imx_scu_irq_group_enable' was not declared. Should it be static? drivers/firmware/imx/imx-scu-irq.c:130:5: warning: symbol 'imx_scu_enable_general_irq_channel' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) Signed-off-by: Shawn Guo

firmware: imx: Remove call to devm_of_platform_populate

2019-10-28T01:57:13Z

IMX DSP device is created by SOF layer. The current call to devm_of_platform_populate is not needed and it doesn't produce any effects. Fixes: ffbf23d50353915d ("firmware: imx: Add DSP IPC protocol interface) Signed-off-by: Daniel Baluta Signed-off-by: Shawn Guo

firmware: imx: Skip return value check for some special SCU firmware APIs

2019-10-14T12:48:17Z

The SCU firmware does NOT always have return value stored in message header's function element even the API has response data, those special APIs are defined as void function in SCU firmware, so they should be treated as return success always. Signed-off-by: Anson Huang Reviewed-by: Marco Felsch Signed-off-by: Shawn Guo