kernel.git/drivers/edac/synopsys_edac.c, branch linux-5.18.y

EDAC/synopsys: Re-enable the error interrupts on v3 hw

2022-08-03T10:05:29Z

commit 4bcffe941758ee17becb43af3b25487f848f6512 upstream. zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after an interrupt for a {un-,}correctable error is raised, which disables the error interrupts. Then the interrupt handler will be called only once. Therefore, re-enable the error interrupt line at the end of intr_handler() for v3.x Synopsys EDAC DDR. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun Signed-off-by: Borislav Petkov Reviewed-by: Shubhrajyoti Datta Acked-by: Michal Simek Cc: Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman

EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hw

2022-08-03T10:05:29Z

commit be76ceaf03bc04e74be5e28f608316b73c2b04ad upstream. v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the ECC Clear Register to disable the error interrupts instead. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun Signed-off-by: Borislav Petkov Reviewed-by: Shubhrajyoti Datta Acked-by: Michal Simek Cc: Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman

EDAC/synopsys: Read the error count from the correct register

2022-04-14T12:44:49Z

Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Acked-by: Michal Simek Cc: Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com

EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR

2021-11-20T18:23:49Z

Add support for version 3.80a of the Synopsys DDR controller. This version of the controller has the following differences: - UE/CE are auto cleared - Interrupts are supported by default Signed-off-by: Dinh Nguyen Signed-off-by: Borislav Petkov Reviewed-by: Michal Simek Link: https://lkml.kernel.org/r/20211012190709.1504152-2-dinguyen@kernel.org

EDAC/synopsys: Use the quirk for version instead of ddr version

2021-11-20T17:13:06Z

Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that quirk to determine a call to setup_address_map(). Signed-off-by: Dinh Nguyen Signed-off-by: Borislav Petkov Reviewed-by: Michal Simek Link: https://lkml.kernel.org/r/20211012190709.1504152-1-dinguyen@kernel.org

EDAC/synopsys: Fix wrong value type assignment for edac_mode

2021-09-16T08:21:35Z

dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com

EDAC/synopsys: Return the correct value in mc_probe()

2020-11-18T17:59:47Z

Return the error value if the inject sysfs file creation fails, rather than returning 0, to signal to the upper layer that the ->probe function failed. [ bp: Massage. ] Signed-off-by: Zhang Xiaoxu Signed-off-by: Borislav Petkov Reviewed-by: Michal Simek Link: https://lkml.kernel.org/r/20201116135810.3130845-1-zhangxiaoxu5@huawei.com

EDAC/synopsys: Do not dump uninitialized pinf->col

2020-03-17T13:32:31Z

On the ZynqMP platform, zynqmp_get_error_info() is used to read out error information. In this function, the pinf->col parameter is not used (it is only used by the Zynq platform's zynq_get_error_info()). So there's no need to print pinf->col on ZynqMP. In order to differentiate on which platform handle_error() is executed, use DDR_ECC_INTR_SUPPORT as the check condition to distinguish between Zynq and ZynqMP platforms. [ bp: Massage. ] Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Sherry Sun Signed-off-by: Borislav Petkov Reviewed-by: Manish Narani Link: https://lkml.kernel.org/r/1584365679-27443-1-git-send-email-sherry.sun@nxp.com

EDAC/synopsys: Do not print an error with back-to-back snprintf() calls

2020-02-27T15:44:25Z

handle_error() currently calls snprintf() a couple of times in succession to output the message for a CE/UE, therefore overwriting each part of the message which was formatted with the previous snprintf() call. As a result, only the part of the message from the last snprintf() call will be printed. The simplest and most effective way to fix this problem is to combine the whole string into one which to supply to a single snprintf() call. [ bp: Massage. ] Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Sherry Sun Signed-off-by: Borislav Petkov Reviewed-by: James Morse Cc: Manish Narani Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com

EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller

2018-11-06T09:38:27Z

Add support for Error Injection for ZynqMP DDR controller IP. For injecting errors, the Row, Column, Bank, Bank Group and Rank bits positions are determined via Address Map registers of the Synopsys DDR controller. Signed-off-by: Manish Narani Signed-off-by: Borislav Petkov CC: Mauro Carvalho Chehab CC: Michal Simek CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1540447621-22870-7-git-send-email-manish.narani@xilinx.com