kernel.git/drivers/dma/sh, branch linux-6.18.y

dmaengine: sh: rz-dmac: Fix rz_dmac_terminate_all()

2026-01-23T10:21:34Z

commit 747213b08a1ab6a76e3e3b3e7a209cc1d402b5d0 upstream. After audio full duplex testing, playing the recorded file contains a few playback frames from the previous time. The rz_dmac_terminate_all() does not reset all the hardware descriptors queued previously, leading to the wrong descriptor being picked up during the next DMA transfer. Fix the above issue by resetting all the descriptor headers for a channel in rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg(). Cc: stable@kernel.org Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Reviewed-by: Geert Uytterhoeven Signed-off-by: Biju Das Reviewed-by: Claudiu Beznea Tested-by: Claudiu Beznea Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: rz-dmac: fix device leak on probe failure

2026-01-23T10:21:34Z

commit 9fb490323997dcb6f749cd2660a17a39854600cd upstream. Make sure to drop the reference taken when looking up the ICU device during probe also on probe failures (e.g. probe deferral). Fixes: 7de873201c44 ("dmaengine: sh: rz-dmac: Add RZ/V2H(P) support") Cc: stable@vger.kernel.org # 6.16 Cc: Fabrizio Castro Signed-off-by: Johan Hovold Reviewed-by: Fabrizio Castro Link: https://patch.msgid.link/20251117161258.10679-10-johan@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: sh: setup_xref error handling

2025-09-02T06:59:36Z

This patch modifies the type of setup_xref from void to int and handles errors since the function can fail. `setup_xref` now returns the (eventual) error from `dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the result, removing the chunks from the queue and marking PM as idle in case of an error. Signed-off-by: Thomas Andreatta Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com Signed-off-by: Vinod Koul

dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing

2025-06-26T22:34:19Z

Enabling the compile test should not cause automatic enabling of all drivers. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250404122114.359087-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul

dmaengine: sh: rz-dmac: Add RZ/V2H(P) support

2025-05-14T14:30:40Z

The DMAC IP found on the Renesas RZ/V2H(P) family of SoCs is similar to the version found on the Renesas RZ/G2L family of SoCs, but there are some differences: * It only uses one register area * It only uses one clock * It only uses one reset * Instead of using MID/IRD it uses REQ No * It is connected to the Interrupt Control Unit (ICU) * On the RZ/G2L there is only 1 DMAC, on the RZ/V2H(P) there are 5 Add specific support for the Renesas RZ/V2H(P) family of SoC by tackling the aforementioned differences. Signed-off-by: Fabrizio Castro Reviewed-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20250423143422.3747702-6-fabrizio.castro.jz@renesas.com Signed-off-by: Vinod Koul

dmaengine: sh: rz-dmac: Allow for multiple DMACs

2025-05-14T14:30:40Z

dma_request_channel() calls into __dma_request_channel() with NULL as value for np, which won't allow for the selection of the correct DMAC when multiple DMACs are available. Switch to using __dma_request_channel() directly so that we can choose the desired DMA for the channel. This is in preparation of adding DMAC support for the Renesas RZ/V2H(P) and similar SoCs. Signed-off-by: Fabrizio Castro Reviewed-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20250423143422.3747702-5-fabrizio.castro.jz@renesas.com Signed-off-by: Vinod Koul

dmaengine: Fix typo in comment

2025-02-27T12:06:29Z

s/consumer/consume/ Signed-off-by: Thorsten Blum Link: https://lore.kernel.org/r/20250219105419.2025-2-thorsten.blum@linux.dev Signed-off-by: Vinod Koul

dmaengine: sh: rcar-dmac: add comment for r8a779a0 compatible

2024-12-04T12:30:56Z

Add the reason why we need r8a779a0 compatible. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87a5dlwlr0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Vinod Koul

dmaengine: fix typo in the comment

2024-10-21T17:37:08Z

Correctly spelled comments make it easier for the reader to understand the code. Replace 'enngine' with 'engine' in the comment & replace 'trascatioin' with 'transaction' in the comment & replace 'descripter' with 'descriptor' in the comment & replace 'descritpor' with 'descriptor' in the comment & replace 'rgisters' with 'registers' in the comment. Signed-off-by: Yan Zhen Acked-by: Palmer Dabbelt Link: https://lore.kernel.org/r/20240918034114.860132-1-yanzhen@vivo.com Signed-off-by: Vinod Koul

dmaengine: Switch back to struct platform_driver::remove()

2024-10-14T18:20:34Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/dma after the previous conversion commits apart from the wireless drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20241004062227.187726-2-u.kleine-koenig@baylibre.com Signed-off-by: Vinod Koul