kernel.git/drivers/dma/idxd/init.c, branch linux-6.3.y

dmaengine: idxd: Fix default allowed read buffers value in group

2023-02-16T13:15:48Z

Currently default read buffers that is allowed in a group is 0. grpcfg will be configured to max read buffers that IDXD can support if the group's allowed read buffers value is 0. But 0 is an invalid read buffers value and user may get confused when seeing the invalid initial value 0 through sysfs interface. To show only valid allowed read buffers value and eliminate confusion, directly initialize the allowed read buffers to IDXD's max read buffers. User still can change the value through sysfs interface. Suggested-by: Ramesh Thomas Signed-off-by: Fenghua Yu Reviewed-by: Nikhil Rao Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20230127192855.966929-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul

dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0

2022-12-28T07:00:50Z

On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best performance and cannot be changed through sysfs knobs unless override option is given. The same values should be set on DSA 2.0 as well. Fixes: ea7c8f598c32 ("dmaengine: idxd: restore traffic class defaults after wq reset") Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class") Signed-off-by: Fenghua Yu Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul

Merge tag 'v6.1-rc7' into iommufd.git for-next

2022-12-02T16:04:39Z

Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version. The rc fix was done a different way when iommufd patches reworked this code. Signed-off-by: Jason Gunthorpe

dmaengine: idxd: Fix max batch size for Intel IAA

2022-11-08T05:13:55Z

>From Intel IAA spec [1], Intel IAA does not support batch processing. Two batch related default values for IAA are incorrect in current code: (1) The max batch size of device is set during device initialization, that indicates batch is supported. It should be always 0 on IAA. (2) The max batch size of work queue is set to WQ_DEFAULT_MAX_BATCH (32) as the default value regardless of Intel DSA or IAA device during work queue setup and cleanup. It should be always 0 on IAA. Fix the issues by setting the max batch size of device and max batch size of work queue to 0 on IAA device, that means batch is not supported. [1]: https://cdrdv2.intel.com/v1/dl/getContent/721858 Fixes: 23084545dbb0 ("dmaengine: idxd: set max_xfer and max_batch for RO device") Fixes: 92452a72ebdf ("dmaengine: idxd: set defaults for wq configs") Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Xiaochen Shen Reviewed-by: Dave Jiang Reviewed-by: Fenghua Yu Link: https://lore.kernel.org/r/20220930201528.18621-2-xiaochen.shen@intel.com Signed-off-by: Vinod Koul

iommu: Remove SVM_FLAG_SUPERVISOR_MODE support

2022-11-03T14:47:45Z

The current kernel DMA with PASID support is based on the SVA with a flag SVM_FLAG_SUPERVISOR_MODE. The IOMMU driver binds the kernel memory address space to a PASID of the device. The device driver programs the device with kernel virtual address (KVA) for DMA access. There have been security and functional issues with this approach: - The lack of IOTLB synchronization upon kernel page table updates. (vmalloc, module/BPF loading, CONFIG_DEBUG_PAGEALLOC etc.) - Other than slight more protection, using kernel virtual address (KVA) has little advantage over physical address. There are also no use cases yet where DMA engines need kernel virtual addresses for in-kernel DMA. This removes SVM_FLAG_SUPERVISOR_MODE support from the IOMMU interface. The device drivers are suggested to handle kernel DMA with PASID through the kernel DMA APIs. The drvdata parameter in iommu_sva_bind_device() and all callbacks is not needed anymore. Cleanup them as well. Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/ Signed-off-by: Jacob Pan Signed-off-by: Lu Baolu Reviewed-by: Jason Gunthorpe Reviewed-by: Jean-Philippe Brucker Reviewed-by: Kevin Tian Reviewed-by: Fenghua Yu Tested-by: Zhangfei Gao Tested-by: Tony Zhu Link: https://lore.kernel.org/r/20221031005917.45690-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel

dmaengine: idxd: add WQ operation cap restriction support

2022-09-29T17:16:08Z

DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis. This means that certain ops can be disabled by the system administrator for certain wq. By default, all ops are available. A bitmap is used to store the ops due to total op size of 256 bits and it is more convenient to use a range list to specify which bits are enabled. One of the usage to support this is for VM migration between different iteration of devices. The newer ops are disabled in order to allow guest to migrate to a host that only support older ops. Another usage is to restrict the WQ to certain operations for QoS of performance. A sysfs of ops_config attribute is added per wq. It is only usable when the ops_config bit is set under WQ_CAP register. This means that this attribute will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range list for the bits per operation the WQ supports. Signed-off-by: Dave Jiang Co-developed-by: Fenghua Yu Signed-off-by: Fenghua Yu Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul

dmanegine: idxd: reformat opcap output to match bitmap_parse() input

2022-09-29T17:16:08Z

To make input and output consistent and prepping for the per WQ operation configuration support, change the output of opcap display to match the input that is expected by bitmap_parse() helper function. The output will be a bitmap with field width as the number of bits using the %*pb format specifier for printk() family. Signed-off-by: Dave Jiang Co-developed-by: Fenghua Yu Signed-off-by: Fenghua Yu Link: https://lore.kernel.org/r/20220917161222.2835172-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul

dmaengine: idxd: track enabled workqueues in bitmap

2022-09-29T07:32:38Z

Now that idxd_wq_disable_cleanup() sets the workqueue state to IDXD_WQ_DISABLED, use a bitmap to track which workqueues have been enabled. This will then be used to determine which workqueues should be re-enabled when attempting a software reset to recover from a device halt state. Cc: Fenghua Yu Cc: Dave Jiang Cc: Vinod Koul Signed-off-by: Jerry Snitselaar Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20220928154856.623545-3-jsnitsel@redhat.com Signed-off-by: Vinod Koul

dmaengine: idxd: Only call idxd_enable_system_pasid() if succeeded in enabling SVA feature

2022-07-05T12:58:05Z

On a Sapphire Rapids system if boot without intel_iommu=on, the IDXD driver will crash during probe in iommu_sva_bind_device(). [ 21.423729] BUG: kernel NULL pointer dereference, address: 0000000000000038 [ 21.445108] #PF: supervisor read access in kernel mode [ 21.450912] #PF: error_code(0x0000) - not-present page [ 21.456706] PGD 0 [ 21.459047] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 21.464004] CPU: 0 PID: 1420 Comm: kworker/0:3 Not tainted 5.19.0-0.rc3.27.eln120.x86_64 #1 [ 21.464011] Hardware name: Intel Corporation EAGLESTREAM/EAGLESTREAM, BIOS EGSDCRB1.SYS.0067.D12.2110190954 10/19/2021 [ 21.464015] Workqueue: events work_for_cpu_fn [ 21.464030] RIP: 0010:iommu_sva_bind_device+0x1d/0xe0 [ 21.464046] Code: c3 cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 41 54 55 53 48 83 ec 08 48 8b 87 d8 02 00 00 <48> 8b 40 38 48 8b 50 10 48 83 7a 70 00 48 89 14 24 0f 84 91 00 00 [ 21.464050] RSP: 0018:ff7245d9096b7db8 EFLAGS: 00010296 [ 21.464054] RAX: 0000000000000000 RBX: ff1eadeec8a51000 RCX: 0000000000000000 [ 21.464058] RDX: ff7245d9096b7e24 RSI: 0000000000000000 RDI: ff1eadeec8a510d0 [ 21.464060] RBP: ff1eadeec8a51000 R08: ffffffffb1a12300 R09: ff1eadffbfce25b4 [ 21.464062] R10: ffffffffffffffff R11: 0000000000000038 R12: ffffffffc09f8000 [ 21.464065] R13: ff1eadeec8a510d0 R14: ff7245d9096b7e24 R15: ff1eaddf54429000 [ 21.464067] FS: 0000000000000000(0000) GS:ff1eadee7f600000(0000) knlGS:0000000000000000 [ 21.464070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.464072] CR2: 0000000000000038 CR3: 00000008c0e10006 CR4: 0000000000771ef0 [ 21.464074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 21.464076] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 21.464078] PKRU: 55555554 [ 21.464079] Call Trace: [ 21.464083] [ 21.464092] idxd_pci_probe+0x259/0x1070 [idxd] [ 21.464121] local_pci_probe+0x3e/0x80 [ 21.464132] work_for_cpu_fn+0x13/0x20 [ 21.464136] process_one_work+0x1c4/0x380 [ 21.464143] worker_thread+0x1ab/0x380 [ 21.464147] ? _raw_spin_lock_irqsave+0x23/0x50 [ 21.464158] ? process_one_work+0x380/0x380 [ 21.464161] kthread+0xe6/0x110 [ 21.464168] ? kthread_complete_and_exit+0x20/0x20 [ 21.464172] ret_from_fork+0x1f/0x30 iommu_sva_bind_device() requires SVA has been enabled successfully on the IDXD device before it's called. Otherwise, iommu_sva_bind_device() will access a NULL pointer. If Intel IOMMU is disabled, SVA cannot be enabled and thus idxd_enable_system_pasid() and iommu_sva_bind_device() should not be called. Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling") Cc: Vinod Koul Cc: linux-kernel@vger.kernel.org Cc: Dave Jiang Cc: Fenghua Yu Link: https://lore.kernel.org/dmaengine/20220623170232.6whonfjuh3m5vcoy@cantor/ Signed-off-by: Jerry Snitselaar Acked-by: Fenghua Yu Link: https://lore.kernel.org/r/20220626051648.14249-1-jsnitsel@redhat.com Signed-off-by: Vinod Koul

dmaengine: idxd: Separate user and kernel pasid enabling

2022-05-16T12:49:29Z

The idxd driver always gated the pasid enabling under a single knob and this assumption is incorrect. The pasid used for kernel operation can be independently toggled and has no dependency on the user pasid (and vice versa). Split the two so they are independent "enabled" flags. Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/165231431746.986466.5666862038354800551.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul