kernel.git/drivers/crypto/caam/regs.h, branch linux-5.3.y

crypto: caam/qi - fix error handling in ERN handler

2019-10-11T16:36:04Z

commit 51fab3d73054ca5b06b26e20edac0486b052c6f4 upstream. ERN handler calls the caam/qi frontend "done" callback with a status of -EIO. This is incorrect, since the callback expects a status value meaningful for the crypto engine - hence the cryptic messages like the one below: platform caam_qi: 15: unknown error source Fix this by providing the callback with: -the status returned by the crypto engine (fd[status]) in case it contains an error, OR -a QI "No error" code otherwise; this will trigger the message: platform caam_qi: 50000000: Queue Manager Interface: No error which is fine, since QMan driver provides details about the cause of failure Cc: # v5.1+ Fixes: 67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support") Signed-off-by: Horia Geantă Reviewed-by: Iuliana Prodan Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

Revert "crypto: caam/jr - Remove extra memory barrier during job ring dequeue"

2019-05-09T05:20:48Z

This reverts commit bbfcac5ff5f26aafa51935a62eb86b6eacfe8a49. It caused a crash regression on powerpc: https://lore.kernel.org/linux-crypto/87pnp2aflz.fsf@concordia.ellerman.id.au/ Signed-off-by: Herbert Xu

crypto: caam/jr - update gcm detection logic

2019-04-25T07:38:12Z

GCM detection logic has to change for two reasons: -some CAAM instantiations with Era < 10, even though they have AES LP, they now support GCM mode -Era 10 upwards, there is a dedicated bit in AESA_VERSION[AESA_MISC] field for GCM support For Era 9 and earlier, all AES accelerator versions support GCM, except for AES LP (CHAVID_LS[AESVID]=3) with revision CRNR[AESRN] < 8. For Era 10 and later, bit 9 of the AESA_VERSION register should be used to detect GCM support in AES accelerator. Note: caam/qi and caam/qi2 are drivers for QI (Queue Interface), which is used in DPAA-based SoCs; for now, we rely on CAAM having an AES HP and this AES accelerator having support for GCM. Signed-off-by: Horia Geantă Reviewed-by: Iuliana Prodan Signed-off-by: Herbert Xu

crypto: caam/jr - Remove extra memory barrier during job ring dequeue

2019-04-18T14:14:58Z

In function caam_jr_dequeue(), a full memory barrier is used before writing response job ring's register to signal removal of the completed job. Therefore for writing the register, we do not need another write memory barrier. Hence it is removed by replacing the call to wr_reg32() with a newly defined function wr_reg32_relaxed(). Signed-off-by: Vakul Garg Signed-off-by: Herbert Xu

crypto: caam - add register map changes cf. Era 10

2018-11-16T06:11:03Z

Era 10 changes the register map. The updates that affect the drivers: -new version registers are added -DBG_DBG[deco_state] field is moved to a new register - DBG_EXEC[19:16] @ 8_0E3Ch. Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - add Queue Interface v2 error codes

2018-09-21T05:24:51Z

Add support to translate error codes returned by QI v2, i.e. Queue Interface present on DataPath Acceleration Architecture v2 (DPAA2). Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - fix implicit casts in endianness helpers

2018-09-21T05:24:50Z

Fix the following sparse endianness warnings: drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@ expected unsigned int @@ got restricted __le32unsigned int @@ drivers/crypto/caam/regs.h:95:1: expected unsigned int drivers/crypto/caam/regs.h:95:1: got restricted __le32 [usertype] drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@ expected unsigned int @@ got restricted __be32unsigned int @@ drivers/crypto/caam/regs.h:95:1: expected unsigned int drivers/crypto/caam/regs.h:95:1: got restricted __be32 [usertype] drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32 drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32 Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness") Reported-by: kbuild test robot Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - allow retrieving 'era' from register

2018-04-20T16:58:37Z

The 'era' information can be retrieved from CAAM registers, so introduce a caam_get_era_from_hw() function that gets it via register reads in case the 'fsl,sec-era' property is not passed in the device tree. This function is based on the U-Boot implementation from drivers/crypto/fsl/sec.c Signed-off-by: Fabio Estevam Reviewed-by: Horia Geantă Tested-by: Breno Lima Signed-off-by: Herbert Xu

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel

2017-09-20T09:42:42Z

When built using multi_v7_defconfig, driver does not work on LS1021A: [...] caam 1700000.crypto: can't identify CAAM ipg clk: -2 caam: probe of 1700000.crypto failed with error -2 [...] It turns out we have to detect at runtime whether driver is running on an i.MX platform or not. Cc: Fixes: 6c3af9559352 ("crypto: caam - add support for LS1021A") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu