kernel.git/drivers/cpuidle/cpuidle.c, branch linux-3.15.y

Merge branch 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-04-02T23:22:27Z

Pull sched/idle changes from Ingo Molnar: "More idle code reorganization, to prepare for more integration. (Sent separately because it depended on pending timer work, which is now upstream)" * 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/idle: Add more comments to the code sched/idle: Move idle conditions in cpuidle_idle main function sched/idle: Reorganize the idle loop cpuidle/idle: Move the cpuidle_idle_call function to idle.c idle/cpuidle: Split cpuidle_idle_call main function into smaller functions

Merge tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2014-04-01T19:48:54Z

Pull ACPI and power management updates from Rafael Wysocki: "The majority of this material spent some time in linux-next, some of it even several weeks. There are a few relatively fresh commits in it, but they are mostly fixes and simple cleanups. ACPI took the lead this time, both in terms of the number of commits and the number of modified lines of code, cpufreq follows and there are a few changes in the PM core and in cpuidle too. A new feature that already got some LWN.net's attention is the device PM QoS extension allowing latency tolerance requirements to be propagated from leaf devices to their ancestors with hardware interfaces for specifying latency tolerance. That should help systems with hardware-driven power management to avoid going too far with it in cases when there are latency tolerance constraints. There also are some significant changes in the ACPI core related to the way in which hotplug notifications are handled. They affect PCI hotplug (ACPIPHP) and the ACPI dock station code too. The bottom line is that all those notification now go through the root notify handler and are propagated to the interested subsystems by means of callbacks instead of having to install a notify handler for each device object that we can potentially get hotplug notifications for. In addition to that ACPICA will now advertise "Windows 2013" compatibility for _OSI, because some systems out there don't work correctly if that is not done (some of them don't even boot). On the system suspend side of things, all of the device suspend and resume callbacks, except for ->prepare() and ->complete(), are now going to be executed asynchronously as that turns out to speed up system suspend and resume on some platforms quite significantly and we have a few more optimizations in that area. Apart from that, there are some new device IDs and fixes and cleanups all over. In particular, the system suspend and resume handling by cpufreq should be improved and the cpuidle menu governor should be a bit more robust now. Specifics: - Device PM QoS support for latency tolerance constraints on systems with hardware interfaces allowing such constraints to be specified. That is necessary to prevent hardware-driven power management from becoming overly aggressive on some systems and to prevent power management features leading to excessive latencies from being used in some cases. - Consolidation of the handling of ACPI hotplug notifications for device objects. This causes all device hotplug notifications to go through the root notify handler (that was executed for all of them anyway before) that propagates them to individual subsystems, if necessary, by executing callbacks provided by those subsystems (those callbacks are associated with struct acpi_device objects during device enumeration). As a result, the code in question becomes both smaller in size and more straightforward and all of those changes should not affect users. - ACPICA update, including fixes related to the handling of _PRT in cases when it is broken and the addition of "Windows 2013" to the list of supported "features" for _OSI (which is necessary to support systems that work incorrectly or don't even boot without it). Changes from Bob Moore and Lv Zheng. - Consolidation of ACPI _OST handling from Jiang Liu. - ACPI battery and AC fixes allowing unusual system configurations to be handled by that code from Alexander Mezin. - New device IDs for the ACPI LPSS driver from Chiau Ee Chew. - ACPI fan and thermal optimizations related to system suspend and resume from Aaron Lu. - Cleanups related to ACPI video from Jean Delvare. - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan Tianyu, Paul Bolle, Tomasz Nowicki. - Intel RAPL (Running Average Power Limits) driver cleanups from Jacob Pan. - intel_pstate fixes and cleanups from Dirk Brandewie. - cpufreq fixes related to system suspend/resume handling from Viresh Kumar. - cpufreq core fixes and cleanups from Viresh Kumar, Stratos Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches. - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob Herring. - cpuidle fixes related to the menu governor from Tuukka Tikkanen. - cpuidle fix related to coupled CPUs handling from Paul Burton. - Asynchronous execution of all device suspend and resume callbacks, except for ->prepare and ->complete, during system suspend and resume from Chuansheng Liu. - Delayed resuming of runtime-suspended devices during system suspend for the PCI bus type and ACPI PM domain. - New set of PM helper routines to allow device runtime PM callbacks to be used during system suspend and resume more easily from Ulf Hansson. - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven, Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella. - devfreq fix from Saravana Kannan" * tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs PM / sleep: Correct whitespace errors in intel_pstate: Set core to min P state during core offline cpufreq: Add stop CPU callback to cpufreq_driver interface cpufreq: Remove unnecessary braces cpufreq: Fix checkpatch errors and warnings cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs MAINTAINERS: Reorder maintainer addresses for PM and ACPI PM / Runtime: Update runtime_idle() documentation for return value meaning video / output: Drop display output class support fujitsu-laptop: Drop unneeded include acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL ACPI / video: fix ACPI_VIDEO dependencies cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE} cpufreq: Do not allow ->setpolicy drivers to provide ->target cpufreq: arm_big_little: set 'physical_cluster' for each CPU cpufreq: arm_big_little: make vexpress driver depend on bL core driver ACPI / button: Add ACPI Button event via netlink routine ACPI: Remove duplicate definitions of PREFIX ...

cpuidle: delay enabling interrupts until all coupled CPUs leave idle

2014-03-11T23:24:21Z

As described by a comment at the end of cpuidle_enter_state_coupled it can be inefficient for coupled idle states to return with IRQs enabled since they may proceed to service an interrupt instead of clearing the coupled idle state. Until they have finished & cleared the idle state all CPUs coupled with them will spin rather than being able to enter a safe idle state. Commits e1689795a784 "cpuidle: Add common time keeping and irq enabling" and 554c06ba3ee2 "cpuidle: remove en_core_tk_irqen flag" led to the cpuidle_enter_state enabling interrupts for all idle states, including coupled ones, making this inefficiency unavoidable by drivers & the local_irq_enable near the end of cpuidle_enter_state_coupled redundant. This patch avoids enabling interrupts in cpuidle_enter_state after a coupled state has been entered, allowing them to remain disabled until all coupled CPUs have exited the idle state and cpuidle_enter_state_coupled re-enables them. Cc: Daniel Lezcano Signed-off-by: Paul Burton Signed-off-by: Rafael J. Wysocki

cpuidle/idle: Move the cpuidle_idle_call function to idle.c

2014-03-11T10:52:45Z

The cpuidle_idle_call does nothing more than calling the three individuals function and is no longer used by any arch specific code but only in the cpuidle framework code. We can move this function into the idle task code to ensure better proximity to the scheduler code. Signed-off-by: Daniel Lezcano Acked-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-2-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar

idle/cpuidle: Split cpuidle_idle_call main function into smaller functions

2014-03-11T10:52:45Z

In order to allow better integration between the cpuidle framework and the scheduler, reducing the distance between these two sub-components will facilitate this integration by moving part of the cpuidle code in the idle task file and, because idle.c is in the sched directory, we have access to the scheduler's private structures. This patch splits the cpuidle_idle_call main entry function into 3 calls to a newly added API: 1. select the idle state 2. enter the idle state 3. reflect the idle state The cpuidle_idle_call calls these three functions to implement the main idle entry function. Signed-off-by: Daniel Lezcano Acked-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar

cpuidle: Handle clockevents_notify(BROADCAST_ENTER) failure

2014-02-07T14:34:29Z

Some archs set the CPUIDLE_FLAG_TIMER_STOP flag for idle states in which the local timers stop. The cpuidle_idle_call() currently handles such idle states by calling into the broadcast framework so as to wakeup CPUs at their next wakeup event. With the hrtimer mode of broadcast, the BROADCAST_ENTER call into the broadcast frameowork can fail for archs that do not have an external clock device to handle wakeups and the CPU in question has thus to be made the stand by CPU. This patch handles such cases by failing the call into cpuidle so that the arch can take some default action. The arch will certainly not enter a similar idle state because a failed cpuidle call will also implicitly indicate that the broadcast framework has not registered this CPU to be woken up. Hence we are safe if we fail the cpuidle call. In the process move the functions that trace idle statistics just before and after the entry and exit into idle states respectively. In other scenarios where the call to cpuidle fails, we end up not tracing idle entry and exit since a decision on an idle state could not be taken. Similarly when the call to broadcast framework fails, we skip tracing idle statistics because we are in no further position to take a decision on an alternative idle state to enter into. Signed-off-by: Preeti U Murthy Cc: deepthi@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: fweisbec@gmail.com Cc: paulus@samba.org Cc: srivatsa.bhat@linux.vnet.ibm.com Cc: svaidy@linux.vnet.ibm.com Cc: peterz@infradead.org Cc: benh@kernel.crashing.org Acked-by: Rafael J. Wysocki Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140207080652.17187.66344.stgit@preeti.in.ibm.com Signed-off-by: Thomas Gleixner

cpuidle: Check for dev before deregistering it.

2013-12-03T21:05:22Z

If not, we could end up in the unfortunate situation where we dereference a NULL pointer b/c we have cpuidle disabled. This is the case when booting under Xen (which uses the ACPI P/C states but disables the CPU idle driver) - and can be easily reproduced when booting with cpuidle.off=1. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] cpuidle_unregister_device+0x2a/0x90 .. snip.. Call Trace: [] acpi_processor_power_exit+0x3c/0x5c [] acpi_processor_stop+0x61/0xb6 [] __device_release_driver+0fffff81421653>] device_release_driver+0x23/0x30 [] bus_remove_device+0x108/0x180 [] device_del+0x129/0x1c0 [] ? unregister_xenbus_watch+0x1f0/0x1f0 [] device_unregister+0x1e/0x60 [] unregister_cpu+0x39/0x60 [] arch_unregister_cpu+0x23/0x30 [] handle_vcpu_hotplug_event+0xc1/0xe0 [] xenwatch_thread+0x45/0x120 [] ? abort_exclusive_wait+0xb0/0xb0 [] kthread+0xd2/0xf0 [] ? kthread_create_on_node+0x180/0x180 [] ret_from_fork+0x7c/0xb0 [] ? kthread_create_on_node+0x180/0x180 This problem also appears in 3.12 and could be a candidate for backport. Signed-off-by: Konrad Rzeszutek Wilk Cc: All applicable Signed-off-by: Rafael J. Wysocki

cpuidle: don't call poll_idle_init() for every cpu

2013-10-30T00:21:23Z

poll_idle_init() just initializes drv->states[0] and so that is required to be done only once for each driver. Currently, it is called from cpuidle_enable_device() which is called for every CPU that the driver supports. That is not required, so move it to a better place and call it from __cpuidle_register_driver() so that the initialization is carried out only once. Acked-by: Daniel Lezcano Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpuidle: replace multiline statements with single line in cpuidle_idle_call()

2013-10-30T00:21:23Z

Few statements in cpuidle_idle_call() are broken into multiple lines, although that isn't really necessary. Convert those to single line. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpuidle: reduce code duplication inside cpuidle_idle_call()

2013-10-30T00:21:22Z

We are doing this twice in cpuidle_idle_call() routine: drv->states[next_state].flags & CPUIDLE_FLAG_TIMER_STOP Would be better if we actually store this in a local variable and use that. That reduces code duplication and likely makes this piece of code run faster (in case the compiler wasn't able to optimize it earlier) [rjw: Cast the result of bitwise AND to bool explicitly using !!] Acked-by: Daniel Lezcano Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki