kernel.git/drivers/clk/tegra/Makefile, branch linux-5.11.y

clk: tegra: Add custom CCLK implementation

2020-05-12T20:48:42Z

CCLK stands for "CPU Clock", CPU core is running off CCLK. CCLK supports multiple parents, it has internal clock divider and a clock skipper. PLLX is the main CCLK parent that provides clock rates above 1GHz and it has special property such that the CCLK's internal divider is set into bypass mode when PLLX is selected as a parent for CCLK. This patch forks generic Super Clock into CCLK implementation which takes into account all CCLK specifics. The proper CCLK implementation is needed by the upcoming Tegra20 CPUFreq driver update that will allow to utilize the generic cpufreq-dt driver by moving intermediate clock selection into the clock driver. Note that technically this patch could be squashed into clk-super.c, but it is cleaner to have a separate source file. Also note that currently all CCLKLP bits are left in the clk-super.c and only CCLKG is supported by clk-tegra-super-cclk. It shouldn't be difficult to move the CCLKLP bits, but CCLKLP is not used by anything in kernel and thus better not to touch it for now. Acked-by: Peter De Schrijver Tested-by: Peter Geis Tested-by: Marcel Ziswiler Tested-by: Jasper Korten Tested-by: David Heidelberg Tested-by: Nicolas Chauvet Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: Implement Tegra210 EMC clock

2020-05-12T20:48:42Z

The EMC clock needs to carefully coordinate with the EMC controller programming to make sure external memory can be properly clocked. Do so by hooking up the EMC clock with an EMC provider that will specify which rates are supported by the EMC and provide a callback to use for setting the clock rate at the EMC. Based on work by Peter De Schrijver . Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding

clk: tegra: Rename Tegra124 EMC clock source file

2020-05-12T20:48:41Z

This code is only used on Tegra124, so rename it accordingly to make it more consistent with other file names. While at it, also get rid of the TEGRA_CLK_EMC Kconfig symbol that's really just an alias for TEGRA124_EMC. Signed-off-by: Thierry Reding

clk: tegra: Remove tegra_pmc_clk_init along with clk ids

2020-03-12T10:34:04Z

Current Tegra clock driver registers PMC clocks clk_out_1, clk_out_2, clk_out_3 and 32KHz blink output in tegra_pmc_init() which does direct PMC register access during clk_ops and these PMC register read and write access will not happen when PMC is in secure mode. Any direct PMC register access from non-secure world will not go through. All the PMC clocks are moved to Tegra PMC driver with PMC as a clock provider. This patch removes tegra_pmc_clk_init along with corresponding clk ids from Tegra clock driver. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

clk: tegra: Add Tegra20/30 EMC clock implementation

2019-11-11T13:01:22Z

A proper External Memory Controller clock rounding and parent selection functionality is required by the EMC drivers, it is not available using the generic clock implementation because only the Memory Controller driver is aware of what clock rates are actually available for a particular device. EMC drivers will have to register a Tegra-specific CLK-API callback which will perform rounding of a requested rate. EMC clock users won't be able to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed and the callback is set up. The functionality is somewhat similar to the clk-emc.c which serves Tegra124+ SoCs. The later HW generations support more parent clock sources and the HW configuration / integration with the EMC drivers differs a tad from the older gens, hence it's not really worth to try to squash everything into a single source file. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Acked-by: Stephen Boyd Signed-off-by: Thierry Reding

clk: tegra: dfll: build clk-dfll.c for Tegra124 and Tegra210

2019-02-06T13:29:37Z

Tegra210 has a DFLL as well and can share the majority of the code with the Tegra124 implementation. So build the same code for both platforms. Signed-off-by: Peter De Schrijver Signed-off-by: Joseph Lo Acked-by: Jon Hunter Acked-by: Stephen Boyd Signed-off-by: Thierry Reding

clk: tegra: Add sdmmc mux divider clock

2018-07-25T20:45:09Z

Add a clock type to model the sdmmc switch divider clocks which have paths to source clocks bypassing the divider (Low Jitter paths). These are handled by selecting the lj path when the divider is 1 (ie the rate is the parent rate), otherwise the normal path with divider will be selected. Otherwise this clock behaves as a normal peripheral clock. Signed-off-by: Peter De-Schrijver Signed-off-by: Aapo Vienamo Acked-by: Peter De Schrijver Acked-by: Jon Hunter Signed-off-by: Stephen Boyd

clk: tegra: Refactor fractional divider calculation

2018-07-25T20:43:34Z

Move this to a separate file so it can be used to calculate the sdmmc clock dividers. Signed-off-by: Peter De-Schrijver Signed-off-by: Aapo Vienamo Acked-by: Peter De Schrijver Acked-by: Jon Hunter Signed-off-by: Stephen Boyd

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

clk: tegra: Add BPMP clock driver

2017-02-03T20:36:36Z

This driver uses the services provided by the BPMP firmware driver to implement a clock driver based on the MRQ_CLK request. This part of the BPMP ABI provides a means to enumerate and control clocks and should allow the driver to work on any chip that supports this ABI. Signed-off-by: Thierry Reding Signed-off-by: Stephen Boyd