kernel.git/drivers/clk/sunxi-ng, branch linux-4.16.y

clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

2018-02-19T07:59:50Z

When support for the A31/A31s CCU was first added, the clock ops for the CLK_OUT_* clocks was set to the wrong type. The clocks are MP-type, but the ops was set for div (M) clocks. This went unnoticed until now. This was because while they are different clocks, their data structures aligned in a way that ccu_div_ops would access the second ccu_div_internal and ccu_mux_internal structures, which were valid, if not incorrect. Furthermore, the use of these CLK_OUT_* was for feeding a precise 32.768 kHz clock signal to the WiFi chip. This was achievable by using the parent with the same clock rate and no divider. So the incorrect divider setting did not affect this usage. Commit 946797aa3f08 ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks") added a new field to the ccu_mp structure, which broke the aforementioned alignment. Now the system crashes as div_ops tries to look up a nonexistent table. Reported-by: Philipp Rossak Tested-by: Philipp Rossak Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Cc: Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard

Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-allwinner' into clk-next

2018-01-27T00:43:39Z

* clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO()

Merge branch 'clk-divider-container' into clk-next

2018-01-27T00:43:14Z

* clk-divider-container: clk: divider: fix incorrect usage of container_of Plus fixup sprd/div.c to pass the width too.

clk: sunxi-ng: a83t: Add M divider to TCON1 clock

2018-01-03T05:45:04Z

TCON1 also has M divider, contrary to TCON0. And the mux is only 2 bits wide, instead of 3. Fixes: 05359be1176b ("clk: sunxi-ng: Add driver for A83T CCU") Signed-off-by: Jernej Skrabec [wens@csie.org: Add description about mux width difference] Signed-off-by: Chen-Yu Tsai

clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU

2017-12-29T08:15:14Z

The clocks of A64/H5 SoCs in the DE2 CCU is the same as the clocks in H3 DE2 CCU rather than the A83T DE2 CCU (the parent of them is the DE module clock). Fix this by change the clock descriptions to use the clocks of H3. Fixes: 763c5bd045b1 ("clk: sunxi-ng: add support for DE2 CCU") Signed-off-by: Icenowy Zheng Signed-off-by: Chen-Yu Tsai

clk: sunxi-ng: add support for Allwinner H3 DE2 CCU

2017-12-29T08:15:07Z

Allwinner H3 features a DE2 CCU like the one on A83T, however the parent of the clocks is the DE module clock, not the PLL_DE clock. Add support for it. Signed-off-by: Icenowy Zheng Signed-off-by: Chen-Yu Tsai

clk: divider: fix incorrect usage of container_of

2017-12-28T23:16:04Z

divider_recalc_rate() is an helper function used by clock divider of different types, so the structure containing the 'hw' pointer is not always a 'struct clk_divider' At the following line: > div = _get_div(table, val, flags, divider->width); in several cases, the value of 'divider->width' is garbage as the actual structure behind this memory is not a 'struct clk_divider' Fortunately, this width value is used by _get_val() only when CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so far when the structure is not a 'struct clk_divider'. This is probably why we did not notice this bug before Fixes: afe76c8fd030 ("clk: allow a clk divider with max divisor when zero") Signed-off-by: Jerome Brunet Acked-by: Alexandre Belloni Acked-by: Sylvain Lemieux Signed-off-by: Stephen Boyd

clk: move clock common macros out from vendor directories

2017-12-21T23:00:38Z

These macros are used by more than one SoC vendor platforms, avoid to have many copies of these code, this patch moves them to the common header file which every clock drivers can access to. Signed-off-by: Chunyan Zhang Signed-off-by: Stephen Boyd

clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL

2017-12-08T09:08:32Z

The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the A83T. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard

clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL

2017-12-08T09:08:18Z

On the A83T, the audio PLL should have its div1 set to 0, or /1, and div2 set to 1, or /2. This setting is the default, and is required to match the sigma-delta modulation parameters from the BSP kernel. This patch adds a /2 fixed post divider to the audio PLL, and fixes the enforced d1 & d2 values. This also resolves the mismatch between the values mentioned in the comment for the audio PLL, and the actual enforced values. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard