kernel.git/drivers/clk/samsung, branch linux-rolling-stable

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-12-08T00:38:52Z

Pull clk updates from Stephen Boyd: "This is entirely SoC clk drivers. The majority diff wise is for the new Rockchip and Qualcomm clk drivers which is mostly lines and lines of data structures to describe the clk hardware in these SoCs. Beyond those two, Renesas continues to incrementally add clks to their SoC drivers, causing them to show up higher in the diffstat this time because they added quite a few clks all over the place. Overall it is a semi-quiet release that has some new clk drivers and the usual fixes for clock data that was wrong or missing and non-critical cleanups that plug error paths or fix typos. New Drivers: - Qualcomm IPQ5424 Network Subsystem Clock Controller - Qualcomm SM8750 Video Clock Controller - Rockchip RV1126B and RK3506 clock drivers - i.MX8ULP SIM LPAV clock driver - Samsung ACPM (firmware interface) clock driver - Altera Agilex5 clock driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits) clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: qcom: Mark camcc_sm7150_hws static clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: rockchip: Add clock and reset driver for RK3506 dt-bindings: clock: rockchip: Add RK3506 clock and reset unit clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: visconti: Add VIIF clocks dt-bindings: clock: tmpv770x: Add VIIF clocks dt-bindings: clock: tmpv770x: Remove definition of number of clocks clk: visconti: Do not define number of clocks in bindings clk: rockchip: Add clock controller for the RV1126B dt-bindings: clock, reset: Add support for rv1126b clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll() clk: qcom: x1e80100-dispcc: Add USB4 router link resets dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750 dt-bindings: clock: qcom: Add SM8750 video clock controller clk: qcom: branch: Extend invert logic for branch2 mem clocks ...

Merge branches 'clk-socfpga', 'clk-renesas', 'clk-cleanup', 'clk-samsung' and 'clk-mediatek' into clk-next

2025-12-03T18:22:24Z

* clk-socfpga: clk: socfpga: agilex5: add clock driver for Agilex5 * clk-renesas: (35 commits) clk: renesas: r9a09g077: Add SPI module clocks clk: renesas: r9a09g056: Add USB3.0 clocks/resets clk: renesas: r9a09g057: Add USB3.0 clocks/resets clk: renesas: r9a09g047: Add RSCI clocks/resets dt-bindings: clock: renesas,r9a09g056-cpg: Add USB3.0 core clocks dt-bindings: clock: renesas,r9a09g057-cpg: Add USB3.0 core clocks clk: renesas: r9a06g032: Fix memory leak in error path clk: renesas: r9a09g077: Use devm_ helpers for divider clock registration clk: renesas: r9a09g077: Remove stray blank line clk: renesas: r9a09g077: Propagate rate changes to parent clocks clk: renesas: r8a779a0: Add 3DGE module clock clk: renesas: r8a779a0: Add ZG Core clock clk: renesas: rcar-gen4: Add support for clock dividers in FRQCRB dt-bindings: clock: r8a779a0: Add ZG core clock clk: renesas: r9a09g056: Add clock and reset entries for ISP clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules clk: renesas: r9a09g077: Add TSU module clock clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC clk: renesas: rzv2h: Add support for DSI clocks ... * clk-cleanup: clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: spacemit: fix comment typo clk: keystone: Fix discarded const qualifiers clk: sprd: sc9860: Simplify with of_device_get_match_data() * clk-samsung: firmware: exynos-acpm: add empty method to allow compile test MAINTAINERS: add ACPM clock bindings and driver clk: samsung: add Exynos ACPM clock driver firmware: exynos-acpm: register ACPM clocks pdev firmware: exynos-acpm: add DVFS protocol dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks clk: samsung: clk-pll: simplify samsung_pll_lock_wait() clk: samsung: exynosautov920: add block mfc clock support clk: samsung: exynosautov920: add clock support dt-bindings: clock: exynosautov920: add mfc clock definitions dt-bindings: clock: exynosautov920: add m2m clock definitions dt-bindings: clock: google,gs101-clock: add power-domains * clk-mediatek: clk: en7523: Add reset-controller support for EN7523 SoC dt-bindings: clock: airoha: Add reset support to EN7523 clock binding

clk: samsung: exynos-clkout: Assign .num before accessing .hws

2025-11-30T19:34:00Z

Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS) about the number of elements in .hws[], so that it can warn when .hws[] is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in exynos_clkout_probe() due to .num being assigned after .hws[] has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18 index 0 is out of range for type 'clk_hw *[*]' Move the .num initialization to before the first access of .hws[], clearing up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Reported-by: Jochen Sprickerhof Closes: https://lore.kernel.org/aSIYDN5eyKFKoXKL@eldamar.lan/ Tested-by: Jochen Sprickerhof Signed-off-by: Nathan Chancellor Reviewed-by: Kees Cook Reviewed-by: Sam Protsenko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Stephen Boyd

syscore: Pass context data to callbacks

2025-11-14T09:01:52Z

Several drivers can benefit from registering per-instance data along with the syscore operations. To achieve this, move the modifiable fields out of the syscore_ops structure and into a separate struct syscore that can be registered with the framework. Add a void * driver data field for drivers to store contextual data that will be passed to the syscore ops. Acked-by: Rafael J. Wysocki (Intel) Signed-off-by: Thierry Reding

Merge tag 'samsung-clk-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung

2025-11-14T03:49:32Z

Pull more Samsung clk driver updates from Krzysztof Kozlowski: - ExynosAutov920: add support for additional clock controllers (M2M and MFC) * tag 'samsung-clk-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: clk-pll: simplify samsung_pll_lock_wait() clk: samsung: exynosautov920: add block mfc clock support clk: samsung: exynosautov920: add clock support dt-bindings: clock: exynosautov920: add mfc clock definitions dt-bindings: clock: exynosautov920: add m2m clock definitions dt-bindings: clock: google,gs101-clock: add power-domains

clk: samsung: add Exynos ACPM clock driver

2025-10-20T06:50:35Z

Add the Exynos ACPM clock driver. It provides support for clocks that are controlled by firmware that implements the ACPM interface. Signed-off-by: Tudor Ambarus Reviewed-by: Peter Griffin Tested-by: Peter Griffin # on gs101-oriole Link: https://patch.msgid.link/20251010-acpm-clk-v6-4-321ee8826fd4@linaro.org Signed-off-by: Krzysztof Kozlowski

clk: samsung: clk-pll: simplify samsung_pll_lock_wait()

2025-10-18T16:12:41Z

readl_relaxed_poll_timeout_atomic() has been updated in 2023 in commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") to avoid usage of timekeeping APIs. It also never used udelay() when no delay was given. With the implementation avoiding timekeeping APIs, and with a caller not passing a delay, the timeout argument simply becomes a loop counter. Therefore the code here can be simplified to unconditionally use readl_relaxed_poll_timeout_atomic(). The difference being the last argument, the timeout (loop counter). Simply adjust it to pass the more generous counter in all cases. This change also allows us to drop all code around the pll_early_timeout variable as it is unused now. Reviewed-by: Sam Protsenko Signed-off-by: André Draszik Link: https://patch.msgid.link/20251013-samsung-clk-pll-simplification-v2-1-b9aab610878c@linaro.org Signed-off-by: Krzysztof Kozlowski

clk: samsung: exynosautov920: add block mfc clock support

2025-10-13T00:35:53Z

Add support for CMU_MFC which provides clocks to MFC block, and register the required compatible and cmu_info for the same. Signed-off-by: Raghav Sharma Signed-off-by: Krzysztof Kozlowski

clk: samsung: exynosautov920: add clock support

2025-10-13T00:33:29Z

Add support for CMU_M2M which provides clocks to M2M block, and register the required compatible and cmu_info for the same. Signed-off-by: Raghav Sharma Reviewed-by: Alim Akhtar Signed-off-by: Krzysztof Kozlowski

clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support

2025-09-07T09:12:45Z

Add clock controller support for Peripheral Connectivity 0 and 1 blocks. These provide clocks for USI, I2C and UART peripherals. Some clocks need to be marked as critical to prevent system hang when disabled. Signed-off-by: Denzeel Oliva Signed-off-by: Krzysztof Kozlowski