kernel.git/drivers/clk/samsung, branch linux-5.4.y

clk: samsung: Fix memory leak in _samsung_clk_register_pll()

2023-01-18T10:41:12Z

[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ] If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it. Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls") Signed-off-by: Xiu Jianfeng Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com Reviewed-by: Alim Akhtar Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: exynos7: Mark aclk_fsys1_200 as critical

2021-05-19T08:08:33Z

commit 34138a59b92c1a30649a18ec442d2e61f3bc34dd upstream. This clock must be always enabled to allow access to any registers in fsys1 CMU. Until proper solution based on runtime PM is applied (similar to what was done for Exynos5433), mark that clock as critical so it won't be disabled. It was observed on Samsung Galaxy S6 device (based on Exynos7420), where UFS module is probed before pmic used to power that device. In this case defer probe was happening and that clock was disabled by UFS driver, causing whole boot to hang on next CMU access. Fixes: 753195a749a6 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names") Signed-off-by: Paweł Chmiel Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/linux-clk/20201024154346.9589-1-pawel.mikolaj.chmiel@gmail.com [s.nawrocki: Added comment in the code] Signed-off-by: Sylwester Nawrocki Signed-off-by: Greg Kroah-Hartman

clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED

2020-10-07T06:01:28Z

[ Upstream commit f3bb0f796f5ffe32f0fbdce5b1b12eb85511158f ] The ChipID IO region has it's own clock, which is being disabled while scanning for unused clocks. It turned out that some CPU hotplug, CPU idle or even SOC firmware code depends on the reads from that area. Fix the mysterious hang caused by entering deep CPU idle state by ignoring the 'chipid' clock during unused clocks scan, as there are no direct clients for it which will keep it enabled. Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework") Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200922124046.10496-1-m.szyprowski@samsung.com Reviewed-by: Krzysztof Kozlowski Acked-by: Sylwester Nawrocki Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1

2020-06-24T15:50:30Z

[ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ] Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready. This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e4322aa7 ("of: platform: Batch fwnode parsing when adding all top level devices") Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701 Hardware name: Samsung TM2E board (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : samsung_i2s_probe+0x768/0x8f0 lr : samsung_i2s_probe+0x688/0x8f0 ... Call trace: samsung_i2s_probe+0x768/0x8f0 platform_drv_probe+0x50/0xa8 really_probe+0x108/0x370 driver_probe_device+0x54/0xb8 __device_attach_driver+0x90/0xc0 bus_for_each_drv+0x70/0xc8 __device_attach+0xdc/0x140 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 deferred_probe_work_func+0x70/0xa8 process_one_work+0x2a8/0x718 worker_thread+0x48/0x470 kthread+0x134/0x160 ret_from_fork+0x10/0x1c Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00) ---[ end trace ccf721c9400ddbd6 ]--- Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Sasha Levin

clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical

2020-06-24T15:50:13Z

[ Upstream commit e47bd937e602bb4379546095d1bd0b9871fa60c2 ] The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must be kept enabled all the time to allow proper access to power management control for the ISP and CAM power domains. The last two clocks, although related to GScaler device and GSCL power domain, provides also the I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power domain and are needed for proper power on/off sequence. Currently there are no drivers for the devices, which are part of CAM and ISP power domains yet. This patch only fixes the race between disabling the unused power domains and disabling unused clocks, which randomly resulted in the following error during boot: Power domain CAM disable failed Power domain ISP disable failed Fixes: 318fa46cc60d ("clk/samsung: exynos542x: mark some clocks as critical") Signed-off-by: Marek Szyprowski Acked-by: Chanwoo Choi Signed-off-by: Sylwester Nawrocki Signed-off-by: Sasha Levin

clk: samsung: exynos5420: Keep top G3D clocks enabled

2020-01-23T07:22:39Z

commit 67f96ff7c8f073648696eab50fd23ded23441067 upstream. In Exynos542x/5800 SoCs, the G3D leaf clocks are located in the G3D power domain. This is similar to the other hardware modules and their power domains. However there is one thing specific to G3D clocks hierarchy. Unlike other hardware modules, the G3D clocks hierarchy doesn't have any gate clock between the TOP part of the hierarchy and the part located in the power domain and some SoC internal busses are sourced directly from the TOP muxes. The consequence of this design if the fact that the TOP part of the hierarchy has to be enabled permanently to ensure proper operation of the SoC power related components (G3D power domain and Exynos Power Management Unit for system suspend/resume). This patch adds an explicit call to clk_prepare_enable() on the last MUX in the TOP part of G3D clock hierarchy to keep it enabled permanently to ensure that the internal busses get their clock regardless of the main G3D clock enablement status. This fixes following imprecise abort issue observed on Odroid XU3/XU4 after enabling Panfrost driver by commit 1a5a85c56402 "ARM: dts: exynos: Add Mali/GPU node on Exynos5420 and enable it on Odroid XU3/4"): panfrost 11800000.gpu: clock rate = 400000000 panfrost 11800000.gpu: failed to get regulator: -517 panfrost 11800000.gpu: regulator init failed -517 Power domain G3D disable failed ... panfrost 11800000.gpu: clock rate = 400000000 8<--- cut here --- Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: : 1406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 7 PID: 53 Comm: kworker/7:1 Not tainted 5.4.0-rc8-next-20191119-00032-g56f1001191a6 #6923 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at panfrost_gpu_soft_reset+0x94/0x110 LR is at ___might_sleep+0x128/0x2dc ... [] (panfrost_gpu_soft_reset) from [] (panfrost_gpu_init+0x10/0x67c) [] (panfrost_gpu_init) from [] (panfrost_device_init+0x158/0x2cc) [] (panfrost_device_init) from [] (panfrost_probe+0x80/0x178) [] (panfrost_probe) from [] (platform_drv_probe+0x48/0x9c) [] (platform_drv_probe) from [] (really_probe+0x1c4/0x474) [] (really_probe) from [] (driver_probe_device+0x78/0x1bc) [] (driver_probe_device) from [] (bus_for_each_drv+0x74/0xb8) [] (bus_for_each_drv) from [] (__device_attach+0xd4/0x16c) [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [] (bus_probe_device) from [] (deferred_probe_work_func+0x4c/0xd0) [] (deferred_probe_work_func) from [] (process_one_work+0x300/0x864) [] (process_one_work) from [] (worker_thread+0x58/0x5a0) [] (worker_thread) from [] (kthread+0x12c/0x160) [] (kthread) from [] (ret_from_fork+0x14/0x20) Exception stack(0xee03dfb0 to 0xee03dff8) ... Code: e594300c e5933020 e3130c01 1a00000f (ebefff50). ---[ end trace badde2b74a65a540 ]--- In the above case, the Panfrost driver disables G3D clocks after failure of getting the needed regulator and return with -EPROVE_DEFER code. This causes G3D power domain disable failure and then, during second probe an imprecise abort is triggered due to undefined power domain state. Fixes: 45f10dabb56b ("clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path") Fixes: c9f7567aff31 ("clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU") Signed-off-by: Marek Szyprowski Link: https://lkml.kernel.org/r/20191216131407.17225-1-m.szyprowski@samsung.com Acked-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Acked-by: Sylwester Nawrocki Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume

2020-01-17T18:48:49Z

commit e21be0d1d7bd7f78a77613f6bcb6965e72b22fc1 upstream. Save and restore top PLL related configuration registers for big (APLL) and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks were reset to default values after suspend/resume cycle and performance after system resume was affected when performance governor has been selected. Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by: Marian Mihailescu Signed-off-by: Sylwester Nawrocki Signed-off-by: Greg Kroah-Hartman

clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume

2019-10-25T09:20:00Z

Properly save and restore all top PLL related configuration registers during suspend/resume cycle. So far driver only handled EPLL and RPLL clocks, all other were reset to default values after suspend/resume cycle. This caused for example lower G3D (MALI Panfrost) performance after system resume, even if performance governor has been selected. Reported-by: Reported-by: Marian Mihailescu Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU

2019-10-23T16:26:21Z

G3D clocks require special handling of their parent bus clock during power domain on/off sequences. Those clocks were not initially added to the sub-CMU handler, because that time there was no open-source driver for the G3D (MALI Panfrost) hardware module and it was not possible to test it. This patch fixes this issue. Parent clock for G3D hardware block is now properly preserved during G3D power domain on/off sequence. This restores proper MALI Panfrost performance broken by commit 8686764fc071 ("ARM: dts: exynos: Add G3D power domain to Exynos542x"). Reported-by: Marian Mihailescu Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver") Signed-off-by: Marek Szyprowski Tested-by: Marian Mihailescu Acked-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki

clk: samsung: exynos5433: Fix error paths

2019-10-23T16:23:28Z

Add checking the value returned by samsung_clk_alloc_reg_dump() and devm_kcalloc(). While fixing this, also release all gathered clocks. Fixes: 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM") Signed-off-by: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi [s.nawrocki: squashed patch from K. Kozlowski adding missing slab.h header] Reported-by: kbuild test robot Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sylwester Nawrocki