kernel.git/drivers/clk/renesas, branch linux-5.4.y

clk: renesas: cpg-mssr: Remove superfluous check in resume code

2023-03-11T15:43:51Z

[ Upstream commit 1c052043c79af5f70e80e2acd4dd70904ae08666 ] When the code flow arrives at printing the error message in cpg_mssr_resume_noirq(), we know for sure that we are not running on an RZ/A Soc, as the code checked for that before. Fixes: ace342097768e35f ("clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/144a3e66d748c0c17f3524ac8fa6ece5bf5b6f1e.1673425314.git.geert+renesas@glider.be Signed-off-by: Sasha Levin

clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag

2023-03-11T15:43:50Z

[ Upstream commit ffbf9cf3f9460e320c3f1a90a51145da86c16781 ] Geert suggested defining multiple register layout variants using an enum [1] to support further devices like R-Car V3U. So, use enum clk_reg_layout instead of a boolean .stbyctrl flag. No behavioral change. [1] https://lore.kernel.org/linux-renesas-soc/CAMuHMdVAgN69p9FFnQdO4iHk2CHkeNaVui2Q-FOY6_BFVjQ-Nw@mail.gmail.com/ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1599810232-29035-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven Stable-dep-of: 1c052043c79a ("clk: renesas: cpg-mssr: Remove superfluous check in resume code") Signed-off-by: Sasha Levin

clk: renesas: cpg-mssr: Fix use after free if cpg_mssr_common_init() failed

2023-03-11T15:43:50Z

[ Upstream commit fbfd614aeaa2853c2c575299dfe2458db8eff67e ] If cpg_mssr_common_init() fails after assigning priv to global variable cpg_mssr_priv, it deallocates priv, but cpg_mssr_priv keeps dangling pointer that potentially can be used later. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f7db7bbf031 ("clk: renesas: cpg-mssr: Add early clock support") Signed-off-by: Alexey Khoroshilov Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1671806417-32623-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

clk: renesas: r9a06g032: Repair grave increment error

2023-01-18T10:41:01Z

[ Upstream commit 02693e11611e082e3c4d8653e8af028e43d31164 ] If condition (clkspec.np != pd->dev.of_node) is true, then the driver ends up in an endless loop, forever, locking up the machine. Fixes: aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support") Reviewed-by: Ralph Siemsen Signed-off-by: Marek Vasut Reviewed-by: Gareth Williams Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

clk: renesas: r9a06g032: Fix UART clkgrp bitsel

2022-08-25T09:17:49Z

[ Upstream commit 2dee50ab9e72a3cae75b65e5934c8dd3e9bf01bc ] There are two UART clock groups, each having a mux to select its upstream clock source. The register/bit definitions for accessing these two muxes appear to have been reversed since introduction. Correct them so as to match the hardware manual. Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Ralph Siemsen Reviewed-by: Phil Edworthy Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

clk: renesas: r8a77995: Add ZA2 clock

2021-07-19T06:53:09Z

[ Upstream commit 790c06cc5df263cdaff748670cc65958c81b0951 ] R-Car D3 ZA2 clock is from PLL0D3 or S0, and it can be controlled by ZA2CKCR. It is needed for R-Car Sound, but is not used so far. Using default settings is very enough at this point. This patch adds it by DEF_FIXED(). Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87pmxclrmy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

clk: renesas: r9a06g032: Drop __packed for portability

2020-12-30T10:50:53Z

[ Upstream commit ceabbf94c317c6175dee6e91805fca4a6353745a ] The R9A06G032 clock driver uses an array of packed structures to reduce kernel size. However, this array contains pointers, which are no longer aligned naturally, and cannot be relocated on PPC64. Hence when compile-testing this driver on PPC64 with CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), the following warnings are produced: WARNING: 136 bad relocations c000000000616be3 R_PPC64_UADDR64 .rodata+0x00000000000cf338 c000000000616bfe R_PPC64_UADDR64 .rodata+0x00000000000cf370 ... Fix this by dropping the __packed attribute from the r9a06g032_clkdesc definition, trading a small size increase for portability. This increases the 156-entry clock table by 1 byte per entry, but due to the compiler generating more efficient code for unpacked accesses, the net size increase is only 76 bytes (gcc 9.3.0 on arm32). Reported-by: Stephen Rothwell Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20201130085743.1656317-1-geert+renesas@glider.be Tested-by: Stephen Rothwell # PowerPC allyesconfig build Acked-by: Stephen Boyd Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling

2020-06-24T15:50:14Z

[ Upstream commit ace342097768e35fd41934285604fa97da1e235a ] On SoCs with Standby Control Registers (STBCRs) instead of Module Stop Control Registers (MSTPCRs), the suspend handler saves the wrong registers, and the resume handler prints the wrong register in an error message. Fortunately this cannot happen yet, as the suspend/resume code is used on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not use PSCI. Still, it is better to fix this, to avoid this becoming a problem in the future. Distinguish between STBCRs and MSTPCRs where needed. Replace the useless printing of the virtual register address in the resume error message by printing the register index. Fixes: fde35c9c7db5732c ("clk: renesas: cpg-mssr: Add R7S9210 support") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200507074713.30113-1-geert+renesas@glider.be Signed-off-by: Sasha Levin

clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks

2020-02-24T07:36:39Z

[ Upstream commit 0d67c0340a60829c5c1b7d09629d23bbd67696f3 ] I was unable to get clk_set_rate() setting a lower RPC-IF clock frequency and that issue boiled down to me not passing CLK_SET_RATE_PARENT flag to clk_register_composite() when registering the RPC[D2] clocks... Fixes: db4a0073cc82 ("clk: renesas: rcar-gen3: Add RPC clocks") Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/be27a344-d8bf-9e0c-8950-2d1b48498496@cogentembedded.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-09-20T22:45:07Z

Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...