kernel.git/drivers/clk/clk-gate.c, branch linux-4.4.y

clk: basic-type: Silence warnings about lock imbalances

2015-07-28T18:59:28Z

The basic clock types use conditional locking for the register accessor spinlocks. Add __acquire() and __release() markings in the right locations so that sparse isn't tripped up on the conditional locking. drivers/clk/clk-mux.c:68:12: warning: context imbalance in 'clk_mux_set_parent' - different lock contexts for basic block drivers/clk/clk-divider.c:379:12: warning: context imbalance in 'clk_divider_set_rate' - different lock contexts for basic block drivers/clk/clk-gate.c:71:9: warning: context imbalance in 'clk_gate_endisable' - different lock contexts for basic block drivers/clk/clk-fractional-divider.c:36:9: warning: context imbalance in 'clk_fd_recalc_rate' - different lock contexts for basic block drivers/clk/clk-fractional-divider.c:68:12: warning: context imbalance in 'clk_fd_set_rate' - different lock contexts for basic block Cc: Andy Shevchenko Signed-off-by: Stephen Boyd

clk: basic-types: Remove useless allocation failure printks

2015-05-14T23:51:50Z

Printing an error on kmalloc() failures is unnecessary. Remove the print and use *ptr in sizeof() for future-proof code. Signed-off-by: Stephen Boyd

clk-gate: fix bit # check in clk_register_gate()

2015-01-20T18:09:05Z

In case CLK_GATE_HIWORD_MASK flag is passed to clk_register_gate(), the bit # should be no higher than 15, however the corresponding check is obviously off- by-one. Fixes: 045779942c04 ("clk: gate: add CLK_GATE_HIWORD_MASK") Signed-off-by: Sergei Shtylyov Signed-off-by: Michael Turquette

clk: Add clk_unregister_{divider, gate, mux} to close memory leak

2015-01-17T21:52:41Z

The common clk_register_{divider,gate,mux} functions allocated memory for internal data which wasn't freed anywhere. Drivers using these helpers could only unregister clocks but the memory would still leak. Add corresponding unregister functions which will release all resources. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephen Boyd Signed-off-by: Michael Turquette

clk: use uninitialized_var instead setting 'flags' to 0 directly.

2014-09-27T23:03:06Z

Setting 'flags' to zero will be certainly a misleading way to avoid warning of 'flags' may be used uninitialized. uninitialized_var is a correct way because the warning is a false possitive. Signed-off-by: Xiubo Li Signed-off-by: Mike Turquette

clk: wrap I/O access for improved portability

2013-08-28T00:50:38Z

the common clock drivers were motivated/initiated by ARM development and apparently assume little endian peripherals wrap register/peripherals access in the common code (div, gate, mux) in preparation of adding COMMON_CLK support for other platforms Signed-off-by: Gerhard Sittig Signed-off-by: Mike Turquette

clk: export fixed-factor, gate & mux registration

2013-08-16T19:08:54Z

These registration calls may be used by loadable modules. Export them. Signed-off-by: Mike Turquette

clk: gate: add CLK_GATE_HIWORD_MASK

2013-06-16T03:23:53Z

In Rockchip Cortex-A9 based chips, they don't use paradigm of reading-changing-writing the register contents. Instead they use a hiword mask to indicate the changed bits. When b1 should be set as gate, it also needs to indicate the change by setting hiword mask (b1 << 16). The patch adds gate flag for this usage. Signed-off-by: Heiko Stuebner Signed-off-by: Haojian Zhuang Signed-off-by: Mike Turquette

clk: Add CLK_IS_BASIC flag to identify basic clocks

2012-07-11T22:36:43Z

Most platforms end up using a mix of basic clock types and some which use clk_hw_foo struct for filling in custom platform information when the clocks don't fit into basic types supported. In platform code, its useful to know if a clock is using a basic type or clk_hw_foo, which helps platforms know if they can safely use to_clk_hw_foo to derive the clk_hw_foo pointer from clk_hw. Mark all basic clocks with a CLK_IS_BASIC flag. Signed-off-by: Rajendra Nayak Signed-off-by: Mike Turquette

clk: Use a separate struct for holding init data.

2012-05-02T01:13:20Z

Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette Cc: Andrew Lunn Cc: Rob Herring Cc: Russell King Cc: Jeremy Kerr Cc: Thomas Gleixner Cc: Arnd Bergman Cc: Paul Walmsley Cc: Shawn Guo Cc: Sascha Hauer Cc: Jamie Iles Cc: Richard Zhao Cc: Saravana Kannan Cc: Magnus Damm Cc: Mark Brown Cc: Linus Walleij Cc: Stephen Boyd Cc: Amit Kucheria Cc: Deepak Saxena Cc: Grant Likely