kernel.git/drivers/char/tpm, branch linux-5.16.y

tpm: fix reference counting for struct tpm_chip

2022-04-08T12:05:19Z

commit 7e0438f83dc769465ee663bb5dcf8cc154940712 upstream. The following sequence of operations results in a refcount warning: 1. Open device /dev/tpmrm. 2. Remove module tpm_tis_spi. 3. Write a TPM command to the file descriptor opened at step 1. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4 refcount_t: addition on 0; use-after-free. Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4 brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835] CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2 Hardware name: BCM2711 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xc4/0xd8) [] (dump_stack) from [] (__warn+0x104/0x108) [] (__warn) from [] (warn_slowpath_fmt+0x74/0xb8) [] (warn_slowpath_fmt) from [] (kobject_get+0xa0/0xa4) [] (kobject_get) from [] (tpm_try_get_ops+0x14/0x54 [tpm]) [] (tpm_try_get_ops [tpm]) from [] (tpm_common_write+0x38/0x60 [tpm]) [] (tpm_common_write [tpm]) from [] (vfs_write+0xc4/0x3c0) [] (vfs_write) from [] (ksys_write+0x58/0xcc) [] (ksys_write) from [] (ret_fast_syscall+0x0/0x4c) Exception stack(0xc226bfa8 to 0xc226bff0) bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000 bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684 bfe0: 0000006c beafe648 0001056c b6eb6944 ---[ end trace d4b8409def9b8b1f ]--- The reason for this warning is the attempt to get the chip->dev reference in tpm_common_write() although the reference counter is already zero. Since commit 8979b02aaf1d ("tpm: Fix reference count to main device") the extra reference used to prevent a premature zero counter is never taken, because the required TPM_CHIP_FLAG_TPM2 flag is never set. Fix this by moving the TPM 2 character device handling from tpm_chip_alloc() to tpm_add_char_device() which is called at a later point in time when the flag has been set in case of TPM2. Commit fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm") already introduced function tpm_devs_release() to release the extra reference but did not implement the required put on chip->devs that results in the call of this function. Fix this by putting chip->devs in tpm_chip_unregister(). Finally move the new implementation for the TPM 2 handling into a new function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the good case and error cases. Cc: stable@vger.kernel.org Fixes: fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm") Fixes: 8979b02aaf1d ("tpm: Fix reference count to main device") Co-developed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe Signed-off-by: Lino Sanfilippo Tested-by: Stefan Berger Reviewed-by: Jason Gunthorpe Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: use try_get_ops() in tpm-space.c

2022-03-28T07:59:56Z

commit fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream. As part of the series conversion to remove nested TPM operations: https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/ exposure of the chip->tpm_mutex was removed from much of the upper level code. In this conversion, tpm2_del_space() was missed. This didn't matter much because it's usually called closely after a converted operation, so there's only a very tiny race window where the chip can be removed before the space flushing is done which causes a NULL deref on the mutex. However, there are reports of this window being hit in practice, so fix this by converting tpm2_del_space() to use tpm_try_get_ops(), which performs all the teardown checks before acquring the mutex. Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: Fix error handling in async work

2022-03-28T07:59:54Z

commit 2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream. When an invalid (non existing) handle is used in a TPM command, that uses the resource manager interface (/dev/tpmrm0) the resource manager tries to load it from its internal cache, but fails and the tpm_dev_transmit returns an -EINVAL error to the caller. The existing async handler doesn't handle these error cases currently and the condition in the poll handler never returns mask with EPOLLIN set. The result is that the poll call blocks and the application gets stuck until the user_read_timer wakes it up after 120 sec. Change the tpm_dev_async_work function to handle error conditions returned from tpm_dev_transmit they are also reflected in the poll mask and a correct error code could passed back to the caller. Cc: Jarkko Sakkinen Cc: Jason Gunthorpe Cc: Cc: Cc: Fixes: 9e1b74a63f77 ("tpm: add support for nonblocking operation") Tested-by: Jarkko Sakkinen Signed-off-by: Tadeusz Struk Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Cc: Tadeusz Struk Signed-off-by: Greg Kroah-Hartman

tpm: fix NPE on probe for missing device

2022-01-27T11:02:43Z

commit 84cc69589700b90a4c8d27b481a51fce8cca6051 upstream. When using the tpm_tis-spi driver on a system missing the physical TPM, a null pointer exception was observed. [ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 0.939020] pgd = 10c753cb [ 0.939237] [00000004] *pgd=00000000 [ 0.939808] Internal error: Oops: 5 [#1] SMP ARM [ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1 [ 0.940364] Hardware name: Generic DT based system [ 0.940601] Workqueue: events_unbound async_run_entry_fn [ 0.941048] PC is at tpm_tis_remove+0x28/0xb4 [ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which was not initialized in 'tpm_tis_core_init' prior to the first error. Move the initialization of drvdata earlier so 'tpm_tis_remove' has access to it. Signed-off-by: Patrick Williams Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries") Cc: stable@vger.kernel.org Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: fix potential NULL pointer access in tpm_del_char_device

2022-01-27T11:02:43Z

commit eabad7ba2c752392ae50f24a795093fb115b686d upstream. Some SPI controller drivers unregister the controller in the shutdown handler (e.g. BCM2835). If such a controller is used with a TPM 2 slave chip->ops may be accessed when it is already NULL: At system shutdown the pre-shutdown handler tpm_class_shutdown() shuts down TPM 2 and sets chip->ops to NULL. Then at SPI controller unregistration tpm_tis_spi_remove() is called and eventually calls tpm_del_char_device() which tries to shut down TPM 2 again. Thereby it accesses chip->ops again: (tpm_del_char_device calls tpm_chip_start which calls tpm_clk_enable which calls chip->ops->clk_enable). Avoid the NULL pointer access by testing if chip->ops is valid and skipping the TPM 2 shutdown procedure in case it is NULL. Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo Fixes: 39d0099f9439 ("powerpc/pseries: Add shutdown() to vio_driver and vio_bus") Reviewed-by: Stefan Berger Tested-by: Stefan Berger Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'

2022-01-27T11:02:01Z

[ Upstream commit e96d52822f5ac0a25de78f95cd23421bcbc93584 ] Commit 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries") has moved some code around without updating the error handling path. This is now pointless to 'goto out_err' when neither 'clk_enable()' nor 'ioremap()' have been called yet. Make a direct return instead to avoid undoing things that have not been done. Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries") Signed-off-by: Christophe Jaillet Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm: add request_locality before write TPM_INT_ENABLE

2022-01-27T11:02:01Z

[ Upstream commit 0ef333f5ba7f24f5d8478425c163d3097f1c7afd ] Locality is not appropriately requested before writing the int mask. Add the missing boilerplate. Fixes: e6aef069b6e9 ("tpm_tis: convert to using locality callbacks") Signed-off-by: Chen Jun Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm_tis_spi: Add missing SPI ID

2021-10-26T02:03:34Z

In commit c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries") we added SPI IDs for all the DT aliases to handle the fact that we always use SPI modaliases to load modules even when probed via DT however the mentioned commit missed that the SPI and OF device ID entries did not match and were different and so DT nodes with compatible "tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi rather than just fix the existing one since what's currently there is going to be better for anyone actually using SPI IDs to instantiate. Fixes: c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries") Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Reviewed-by: Jarkko Sakkinen Reviewed-by: Javier Martinez Canillas Signed-off-by: Jarkko Sakkinen

tpm: fix Atmel TPM crash caused by too frequent queries

2021-10-26T02:03:34Z

The Atmel TPM 1.2 chips crash with error `tpm_try_transmit: send(): error -62` since kernel 4.14. It is observed from the kernel log after running `tpm_sealdata -z`. The error thrown from the command is as follows ``` $ tpm_sealdata -z Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl, code=0087 (135), I/O error ``` The issue was reproduced with the following Atmel TPM chip: ``` $ tpm_version T0 TPM 1.2 Version Info: Chip Version: 1.2.66.1 Spec Level: 2 Errata Revision: 3 TPM Vendor ID: ATML TPM Version: 01010000 Manufacturer Info: 41544d4c ``` The root cause of the issue is due to the TPM calls to msleep() were replaced with usleep_range() [1], which reduces the actual timeout. Via experiments, it is observed that the original msleep(5) actually sleeps for 15ms. Because of a known timeout issue in Atmel TPM 1.2 chip, the shorter timeout than 15ms can cause the error described above. A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further reduced the timeout to less than 1ms. With experiments, the problematic timeout in the latest kernel is the one for `wait_for_tpm_stat`. To fix it, the patch reverts the timeout of `wait_for_tpm_stat` to 15ms for all Atmel TPM 1.2 chips, but leave it untouched for Ateml TPM 2.0 chip, and chips from other vendors. As explained above, the chosen 15ms timeout is the actual timeout before this issue introduced, thus the old value is used here. Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to the existing TPM_TIMEOUT_RANGE_US (300us). The fixed has been tested in the system with the affected Atmel chip with no issues observed after boot up. References: [1] 9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers [2] cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core [3] 59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit() [4] 424eaf910c32 tpm: reduce polling time to usecs for even finer granularity Fixes: 9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers") Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/ Signed-off-by: Hao Wu Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: Check for integer overflow in tpm2_map_response_body()

2021-10-26T02:03:33Z

The "4 * be32_to_cpu(data->count)" multiplication can potentially overflow which would lead to memory corruption. Add a check for that. Cc: stable@vger.kernel.org Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Dan Carpenter Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen