kernel.git/drivers/char/tpm, branch linux-4.9.y

tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()

2022-06-06T06:19:46Z

commit d0dc1a7100f19121f6e7450f9cdda11926aa3838 upstream. Currently it returns zero when CRQ response timed out, it should return an error code instead. Fixes: d8d74ea3c002 ("tpm: ibmvtpm: Wait for buffer to be set before proceeding") Signed-off-by: Xiu Jianfeng Reviewed-by: Stefan Berger Acked-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: ibmvtpm: Wait for buffer to be set before proceeding

2020-10-01T18:40:09Z

[ Upstream commit d8d74ea3c00214aee1e1826ca18e77944812b9b4 ] Synchronize with the results from the CRQs before continuing with the initialization. This avoids trying to send TPM commands while the rtce buffer has not been allocated, yet. This patch fixes an existing race condition that may occurr if the hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE request sent during initialization and therefore the ibmvtpm->rtce_buf has not been allocated at the time the first TPM command is sent. Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by: Stefan Berger Acked-by: Nayna Jain Tested-by: Nayna Jain Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tpm/tpm_tis: Free IRQ if probing fails

2020-05-02T15:23:11Z

commit b160c94be5d2816b62c8ac338605668304242959 upstream. Call disable_interrupts() if we have to revert to polling in order not to unnecessarily reserve the IRQ for the life-cycle of the driver. Cc: stable@vger.kernel.org # 4.5.x Reported-by: Hans de Goede Fixes: e3837e74a06d ("tpm_tis: Refactor the interrupt setup") Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm/tpm_i2c_atmel: Return -E2BIG when the transfer is incomplete

2019-04-27T07:34:41Z

commit 442601e87a4769a8daba4976ec3afa5222ca211d upstream Return -E2BIG when the transfer is incomplete. The upper layer does not retry, so not doing that is incorrect behaviour. Cc: stable@vger.kernel.org Fixes: a2871c62e186 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by: Jarkko Sakkinen Reviewed-by: Stefan Berger Reviewed-by: Jerry Snitselaar Signed-off-by: Sasha Levin

tpm/tpm_crb: Avoid unaligned reads in crb_recv()

2019-04-20T07:07:54Z

commit 3d7a850fdc1a2e4d2adbc95cc0fc962974725e88 upstream The current approach to read first 6 bytes from the response and then tail of the response, can cause the 2nd memcpy_fromio() to do an unaligned read (e.g. read 32-bit word from address aligned to a 16-bits), depending on how memcpy_fromio() is implemented. If this happens, the read will fail and the memory controller will fill the read with 1's. This was triggered by 170d13ca3a2f, which should be probably refined to check and react to the address alignment. Before that commit, on x86 memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right thing (from tpm_crb's perspective) for us so far, but we should not rely on that. Thus, it makes sense to fix this also in tpm_crb, not least because the fix can be then backported to stable kernels and make them more robust when compiled in differing environments. Cc: stable@vger.kernel.org Cc: James Morris Cc: Tomas Winkler Cc: Jerry Snitselaar Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface") Signed-off-by: Jarkko Sakkinen Reviewed-by: Jerry Snitselaar Acked-by: Tomas Winkler Signed-off-by: Sasha Levin (Microsoft)

tpm: tpm_i2c_nuvoton: use correct command duration for TPM 2.x

2019-01-09T15:16:45Z

commit 2ba5780ce30549cf57929b01d8cba6fe656e31c5 upstream. tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain Signed-off-by: Tomas Winkler Reviewed-by: Nayna Jain Tested-by: Nayna Jain (For TPM 2.0) Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

tpm: Restore functionality to xen vtpm driver.

2018-11-13T19:16:54Z

commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream. Functionality of the xen-tpmfront driver was lost secondary to the introduction of xenbus multi-page support in commit ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring"). In this commit pointer to location of where the shared page address is stored was being passed to the xenbus_grant_ring() function rather then the address of the shared page itself. This resulted in a situation where the driver would attach to the vtpm-stubdom but any attempt to send a command to the stub domain would timeout. A diagnostic finding for this regression is the following error message being generated when the xen-tpmfront driver probes for a device: <3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62 <3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine the timeouts This fix is relevant to all kernels from 4.1 forward which is the release in which multi-page xenbus support was introduced. Daniel De Graaf formulated the fix by code inspection after the regression point was located. Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring") Signed-off-by: Dr. Greg Wettstein Signed-off-by: Greg Kroah-Hartman [boris: Updated commit message, added Fixes tag] Signed-off-by: Boris Ostrovsky Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

2018-11-13T19:16:52Z

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ] For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by: Hans de Goede Signed-off-by: Javier Martinez Canillas Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)

2018-09-19T20:47:15Z

[ Upstream commit bb853aac2c478ce78116128263801189408ad2a8 ] Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin Reviewed-by: Jarkko Sakkinen Tested-by: Alexander Steffen Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tpm_tis_spi: Pass the SPI IRQ down to the driver

2018-09-19T20:47:15Z

[ Upstream commit 1a339b658d9dbe1471f67b78237cf8fa08bbbeb5 ] An SPI TPM device managed directly on an embedded board using the SPI bus and some GPIO or similar line as IRQ handler will pass the IRQn from the TPM device associated with the SPI device. This is already handled by the SPI core, so make sure to pass this down to the core as well. (The TPM core habit of using -1 to signal no IRQ is dubious (as IRQ 0 is NO_IRQ) but I do not want to mess with that semantic in this patch.) Cc: Mark Brown Signed-off-by: Linus Walleij Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman