kernel.git/drivers/char/tpm/Makefile, branch linux-4.9.y

tpm/tpm_tis_spi: Add support for spi phy

2016-06-25T14:28:57Z

Spi protocol standardized by the TCG is now supported by most of TPM vendors. It supports SPI Bit Protocol as describe in the TCG PTP specification (chapter 6.4.6 SPI Bit Protocol). Irq mode is not supported. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe Signed-off-by: Alexander Steffen Signed-off-by: Christophe Ricard Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Tested-by: Stefan Berger Reviewed-by: Stefan Berger Signed-off-by: Jarkko Sakkinen

tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy

2016-06-25T14:28:57Z

To avoid code duplication between the old tpm_tis and the new and future native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked, so that all common logic is extracted and can be reused from all drivers. The core methods can also be used from other TIS like drivers. itpm workaround is now managed with a specific tis flag TPM_TIS_ITPM_POSSIBLE. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe Signed-off-by: Christophe Ricard Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Tested-by: Stefan Berger Reviewed-by: Stefan Berger Signed-off-by: Jarkko Sakkinen

tpm: Proxy driver for supporting multiple emulated TPMs

2016-06-25T14:26:35Z

This patch implements a proxy driver for supporting multiple emulated TPMs in a system. The driver implements a device /dev/vtpmx that is used to created a client device pair /dev/tpmX (e.g., /dev/tpm10) and a server side that is accessed using a file descriptor returned by an ioctl. The device /dev/tpmX is the usual TPM device created by the core TPM driver. Applications or kernel subsystems can send TPM commands to it and the corresponding server-side file descriptor receives these commands and delivers them to an emulated TPM. The driver retrievs the TPM 1.2 durations and timeouts. Since this requires the startup of the TPM, we send a startup for TPM 1.2 as well as TPM 2. Signed-off-by: Stefan Berger Reviewed-by: Jason Gunthorpe CC: linux-kernel@vger.kernel.org CC: linux-doc@vger.kernel.org CC: linux-api@vger.kernel.org Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)

2015-03-18T21:43:06Z

tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used by different phy such as i2c or spi. The core part is called st33zp24 which is also the main part reference. include/linux/platform_data/tpm_stm_st33.h is renamed consequently. The driver is also split into an i2c phy in charge of sending/receiving data as well as managing platform data or dts configuration. Acked-by: Jarkko Sakkinen Reviewed-by: Jason Gunthorpe Signed-off-by: Christophe Ricard Signed-off-by: Peter Huewe

tpm: TPM 2.0 CRB Interface

2015-01-17T13:00:12Z

tpm_crb is a driver for TPM 2.0 Command Response Buffer (CRB) Interface as defined in PC Client Platform TPM Profile (PTP) Specification. Only polling and single locality is supported as these are the limitations of the available hardware, Platform Trust Techonlogy (PTT) in Haswell CPUs. The driver always applies CRB with ACPI start because PTT reports using only ACPI start as start method but as a result of my testing it requires also CRB start. Signed-off-by: Jarkko Sakkinen Reviewed-by: Jasob Gunthorpe Reviewed-by: Stefan Berger Signed-off-by: Peter Huewe

tpm: TPM 2.0 baseline support

2015-01-17T13:00:11Z

TPM 2.0 devices are separated by adding a field 'flags' to struct tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them. This patch adds the following internal functions: - tpm2_get_random() - tpm2_get_tpm_pt() - tpm2_pcr_extend() - tpm2_pcr_read() - tpm2_startup() Additionally, the following exported functions are implemented for implementing TPM 2.0 device drivers: - tpm2_do_selftest() - tpm2_calc_ordinal_durations() - tpm2_gen_interrupt() The existing functions that are exported for the use for existing subsystems have been changed to check the flags field in struct tpm_chip and use appropriate TPM 2.0 counterpart if TPM_CHIP_FLAG_TPM2 is est. The code for tpm2_calc_ordinal_duration() and tpm2_startup() were originally written by Will Arthur. Signed-off-by: Jarkko Sakkinen Signed-off-by: Will Arthur Reviewed-by: Jasob Gunthorpe Reviewed-by: Stefan Berger Reviewed-by: Peter Huewe Tested-by: Peter Huewe [phuewe: Fixed copy paste error * 2] Signed-off-by: Peter Huewe

tpm: two-phase chip management functions

2015-01-17T13:00:09Z

tpm_register_hardware() and tpm_remove_hardware() are called often before initializing the device. The problem is that the device might not be fully initialized when it comes visible to the user space. This patch resolves the issue by diving initialization into two parts: - tpmm_chip_alloc() creates struct tpm_chip. - tpm_chip_register() sets up the character device and sysfs attributes. The framework takes care of freeing struct tpm_chip by using the devres API. The broken release callback has been wiped. ACPI drivers do not ever get this callback. Regards to Jason Gunthorpe for carefully reviewing this part of the code. Signed-off-by: Jarkko Sakkinen Reviewed-by: Jasob Gunthorpe Reviewed-by: Stefan Berger Tested-by: Scot Doyle Tested-by: Peter Huewe [phuewe: update to upstream changes] Signed-off-by: Peter Huewe

tpm/tpm_i2c_stm_st33: Update Kconfig in order to be inline to other similar product

2015-01-17T13:00:06Z

STMicroelectronics i2c tpm is the only one to have a different tristate label. Rename it "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)" Reviewed-by: Jason Gunthorpe Signed-off-by: Christophe Ricard [phuewe: corrected module name in the helptext] Signed-off-by: Peter Huewe

tpm: Move sysfs functions from tpm-interface to tpm-sysfs

2014-01-06T13:37:24Z

CLASS-sysfs.c is a common idiom for linux subsystems. This is the first step to pulling all the sysfs support code from the drivers into tpm-sysfs. This is a plain text copy from tpm-interface with support changes to make it compile. _tpm_pcr_read is made non-static and is called tpm_pcr_read_dev. Signed-off-by: Jason Gunthorpe Signed-off-by: Peter Huewe

tpm: Pull everything related to /dev/tpmX into tpm-dev.c

2014-01-06T13:37:24Z

CLASS-dev.c is a common idiom for Linux subsystems This pulls all the code related to the miscdev into tpm-dev.c and makes it static. The identical file_operation structs in the drivers are purged and the tpm common code unconditionally creates the miscdev. Signed-off-by: Jason Gunthorpe Reviewed-by: Joel Schopp Reviewed-by: Ashley Lai [phuewe: tpm_dev_release is now used only in this file, thus the EXPORT_SYMBOL can be dropped and the function be marked as static. It has no other in-kernel users] Signed-off-by: Peter Huewe