kernel.git/drivers/bus/ti-sysc.c, branch linux-5.18.y

bus: ti-sysc: Fix warnings for unbind for serial

2022-06-14T16:44:52Z

[ Upstream commit c337125b8834f9719dfda0e40b25eaa266f1b8cf ] We can get "failed to disable" clock_unprepare warnings on unbind at least for the serial console device if the unbind is done before the device has been idled. As some devices are using deferred idle, we must check the status for pending idle work to idle the device. Fixes: 76f0f772e469 ("bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init") Cc: Romain Naour Reviewed-by: Romain Naour Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20220512053021.61650-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific

2022-04-12T09:55:47Z

On beagleboard revisions A to B4 we need to use gpt12 as the system timer. However, the quirk handling added for gpt12 caused a regression for system suspend for am335x as the PM coprocessor needs the timers idled for suspend. Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need it. Beagleboard revisions C and later no longer need to use the gpt12 related quirk. Then at some point, if we decide to drop support for the old beagleboard revisions A to B4, we can also drop the gpt12 related quirks completely. Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status") Reported-by: Kevin Hilman Suggested-by: Kevin Hilman Signed-off-by: Tony Lindgren

Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-11-04T00:00:52Z

Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...

bus: ti-sysc: Fix variable set but not used warning for reinit_modules

2021-10-06T05:38:09Z

Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not used introduced by commit 9d881361206e ("bus: ti-sysc: Add quirk handling for reinit on context lost"). Reported-by: kernel test robot Signed-off-by: Tony Lindgren

bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893

2021-10-06T05:01:13Z

Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in addition to dcan2 for errata i893 handling. Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods" dts property is used with related dcan hwmod data. This should be only needed if anybody needs to git bisect earlier stable trees though. Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") Signed-off-by: Tony Lindgren

Merge branch 'pruss-fix' into fixes

2021-10-06T04:55:44Z

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

bus: ti-sysc: Drop legacy quirk flag for sham

2021-09-21T09:56:14Z

There is no need for the legacy flag any longer for gpio as the omap-sham driver has been fixed to not rely on pm_runtime_irq_safe(). Signed-off-by: Tony Lindgren

bus: ti-sysc: Drop legacy quirk flag for gpio

2021-09-21T09:56:14Z

There is no need for the legacy flag any longer for gpio as the gpio-omap driver has been fixed to not rely on pm_runtime_irq_safe(). Signed-off-by: Tony Lindgren

bus: ti-sysc: Handle otg force idle quirk

2021-09-21T09:56:14Z

Let's add handling the otg force idle quirk for the old omap2430 glue layer used up to omap4 as the musb driver quirk only works if the driver is loaded. Unlike with the am335x glue layer, looks like we don't need the quirk handling for SYSC_QUIRK_REINIT_ON_CTX_LOST. Eventually when all the musb using SoCs are booting with device tree based configuration, we can just remove the related quirk handling from the musb driver. Signed-off-by: Tony Lindgren

bus: ti-sysc: Use context lost quirk for otg

2021-09-21T09:56:14Z

Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss in a more generic way. Signed-off-by: Tony Lindgren