kernel.git/drivers/bus/Kconfig, branch linux-5.11.y

bus: cdmm: Add MIPS R5 arch support

2020-07-21T08:25:42Z

CDMM may be available not only on MIPS R2 architectures, but also on newer MIPS R5 chips. For instance our P5600 chip has one. Let's mark the CDMM bus being supported for that MIPS arch too. Signed-off-by: Serge Semin Reviewed-by: Thomas Bogendoerfer Signed-off-by: Thomas Bogendoerfer

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-05T02:56:20Z

Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...

bus: bt1-axi: Build the driver into the kernel

2020-05-28T20:17:02Z

Alas the method trigger_all_cpu_backtrace() isn't exported by the kernel, but we need to have it called in case of the bus errors detected to get a better description of a possible cause of the error. Let's disable the ability to build the driver as a loadable kernel module then. Note In future the driver will support the AXI-bus interconnect capability, so we'd have to make it built into the kernel anyway. Link: https://lore.kernel.org/r/20200528193113.17372-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Olof Johansson Cc: soc@kernel.org Signed-off-by: Arnd Bergmann

bus: bt1-apb: Build the driver into the kernel

2020-05-28T20:16:58Z

Seeing trigger_all_cpu_backtrace() isn't exported from the kernel and since calling it is a very important part of driver, which may provide a better description of a possible cause of the error, let's disable the ability to build the driver as a loadable kernel module. Link: https://lore.kernel.org/r/20200528193113.17372-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Olof Johansson Cc: soc@kernel.org Signed-off-by: Arnd Bergmann

bus: Add Baikal-T1 APB-bus driver

2020-05-28T12:16:29Z

Baikal-T1 AXI-APB bridge is used to access the SoC subsystem CSRs. IO requests are routed to this bus by means of the DW AMBA 3 AXI Interconnect. In case if an attempted APB transaction stays with no response for a pre-defined time an interrupt occurs and the bus gets freed for a next operation. This driver provides the interrupt handler to detect the erroneous address, prints an error message about the address fault, updates an errors counter. The counter and the APB-bus operations timeout can be accessed via corresponding sysfs nodes. A dedicated sysfs-node can be also used to artificially cause the bus errors described above. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Paul Burton Cc: Olof Johansson Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot Reported-by: kbuild test robot Signed-off-by: Arnd Bergmann

bus: Add Baikal-T1 AXI-bus driver

2020-05-28T12:11:53Z

AXI3-bus is the main communication bus connecting all high-speed peripheral IP-cores with RAM controller and MIPS P5600 cores on Baikal-T1 SoC. Bus traffic arbitration is done by means of DW AMBA 3 AXI Interconnect (so called AXI Main Interconnect) routing IO requests from one SoC block to another. This driver provides a way to detect any bus protocol errors and device not responding situations by means of an embedded on top of the interconnect errors handler block (EHB). AXI Interconnect QoS arbitration tuning is currently unsupported. The bus doesn't provide a way to detect the interconnected devices, so they are supposed to be statically defined like by means of the simple-bus sub-nodes. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Paul Burton Cc: Olof Johansson Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot Reported-by: kbuild test robot Signed-off-by: Arnd Bergmann

Merge tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc

2020-05-15T21:04:40Z

VExpress modularization This series enables building various Versatile Express platform drivers as modules. The primary target is the Fast Model FVP which is supported in Android. As Android is moving towards their GKI, or generic kernel, the hardware support has to be in modules. Currently ARCH_VEXPRESS enables several built-in only drivers. Some of these are needed, but some are only needed for older 32-bit VExpress platforms and can just be disabled. * tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: vexpress: Don't select VEXPRESS_CONFIG bus: vexpress-config: Support building as module vexpress: Move setting master site to vexpress-config bus bus: vexpress-config: simplify config bus probing bus: vexpress-config: Merge vexpress-syscfg into vexpress-config mfd: vexpress-sysreg: Support building as a module mfd: vexpress-sysreg: Use devres API variants mfd: vexpress-sysreg: Drop unused syscon child devices mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO clk: vexpress-osc: Support building as a module clk: vexpress-osc: Use the devres clock API variants clk: versatile: Only enable SP810 on 32-bit by default clk: versatile: Rework kconfig structure amba: Retry adding deferred devices at late_initcall arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS ARM: vexpress: Move vexpress_flags_set() into arch code Signed-off-by: Arnd Bergmann

bus: vexpress-config: Support building as module

2020-05-13T17:42:46Z

Enable building vexpress-config driver as a module. Cc: Lorenzo Pieralisi Cc: Linus Walleij Cc: Greg Kroah-Hartman Reviewed-by: Sudeep Holla Acked-by: Liviu Dudau Signed-off-by: Rob Herring

bus: Add driver for Integrator/AP logic modules

2020-04-28T19:50:20Z

The logic modules on the Integrator/AP (Application Platform) are logic tiles with (typically) one or a few peripheral devices. They are most commonly used for FPGA prototyping. Using the device tree node for logic tiles, we probe them in order and check if the special system controller register confirm their presence before populating the node for a tile. This supercedes the code in arch/arm/mach-integrator/lm.[c|h] and makes it possible to populate the tiles using the device tree instead of boardfile-based descriptions. Tested with all peripherals including graphics and MMC card working fine with the IM-PD1 example tile from Arm. Signed-off-by: Linus Walleij

bus: mhi: core: Add support for registering MHI controllers

2020-03-19T06:41:04Z

This commit adds support for registering MHI controller drivers with the MHI stack. MHI controller drivers manages the interaction with the MHI client devices such as the external modems and WiFi chipsets. They are also the MHI bus master in charge of managing the physical link between the host and client device. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/987 Signed-off-by: Sujeev Dias Signed-off-by: Siddartha Mohanadoss [jhugo: added static config for controllers and fixed several bugs] Signed-off-by: Jeffrey Hugo [mani: removed DT dependency, splitted and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20200220095854.4804-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman