kernel.git/drivers/bcma/host_pci.c, branch linux-4.9.y

bcma: add PCI ID for Foxconn's BCM43142 device

2016-07-18T19:38:24Z

After discovering there are 2 very different 14e4:4365 PCI devices we made ID tables less generic. Back then we believed there are only 2 such devices: 1) 14e4:4365 1028:0016 with SoftMAC BCM43142 chipset 2) 14e4:4365 14e4:4365 with FullMAC BCM4366 chipset >From the recent report it appears there is also 14e4:4365 105b:e092 which should be claimed by bcma. Add back support for it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=121881 Fixes: 515b399c9a20 ("bcma: claim only 14e4:4365 PCI Dell card with SoftMAC BCM43142") Reported-by: Igor Mammedov Signed-off-by: Rafał Miłecki Cc: Stable [4.6+] Tested-by: Igor Mammedov Signed-off-by: Kalle Valo

bcma: claim only 14e4:4365 PCI Dell card with SoftMAC BCM43142

2016-02-06T11:49:17Z

It seems 14e4:4365 pattern is too generic as there are two devices: 1) 14e4:4365 1028:0016 with SoftMAC BCM43142 chipset 2) 14e4:4365 14e4:4365 with FullMAC BCM4366 chipset The later one was found in D-Link DIR-885L router and we want to let brcmfmac handle it. Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: move PCI IRQ control function to host specific code

2015-03-13T14:25:50Z

This function isn't really related to any bus core. It touches PCI device config registers only, so move it to the (PCI) host file. Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: enable support for PCIe Gen 2 host devices

2015-03-02T14:59:45Z

Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: support bringing up bus hosted on PCIe Gen 2

2015-03-02T14:59:45Z

Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: add helpers bringing PCIe hosted bus up / down

2015-03-02T14:59:45Z

Bringing PCIe hosted bus up requires operating on host-related core. Since we plan to support PCIe Gen 2 devices we should provide a helper picking the correct one (PCIE or PCIE2). Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: implement host code support for PCIe Gen 2 devices

2015-01-29T08:54:43Z

This is stil incomplete, so we don't add PCI IDs of new devices yet. Purpose of this patch is to allow testing & adjusting rest of the code. Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

bcma: add another PCI ID of device with BCM43228

2014-10-23T18:02:06Z

It was found attached to the BCM47081A0 SoC. Log: bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08 Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

bcma: move bus struct setup into early part of host specific code

2014-09-09T19:27:18Z

This change is important for SoC host. In future we will want to know chip ID (needed for early MIPS boot) before doing cores scanning. Signed-off-by: Rafał Miłecki Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville

bcma: add PCI ID for spromless BCM43217

2014-08-25T19:39:23Z

This adds the PCI ID a BCM43217 without a sprom. This devices was found on a Netgear R6250 attached to a BCM4708 ARM SoC. bcma: bus1: Found chip with id 0xA8D1, rev 0x00 and package 0x08 bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0) bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0) b43-phy0: Broadcom 43217 WLAN found (core revision 30) b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17 b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 1 Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville