kernel.git/drivers/base/power/wakeup.c, branch linux-4.15.y

treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts

2017-11-22T00:35:54Z

With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|$TIMER_FUNC_TYPE$||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|$TIMER_DATA_TYPE$||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook

PM / core: Convert timers to use timer_setup()

2017-10-24T08:27:42Z

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Removes test of .data field, since that will be going away. Signed-off-by: Kees Cook Signed-off-by: Rafael J. Wysocki

Merge branch 'pm-sleep'

2017-09-03T22:06:02Z

* pm-sleep: ACPI / PM: Check low power idle constraints for debug only PM / s2idle: Rename platform operations structure PM / s2idle: Rename ->enter_freeze to ->enter_s2idle PM / s2idle: Rename freeze_state enum and related items PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE ACPI / PM: Prefer suspend-to-idle over S3 on some systems platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle PM / suspend: Define pr_fmt() in suspend.c PM / suspend: Use mem_sleep_labels[] strings in messages PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq() PM / core: Add error argument to dpm_show_time() PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq() PM / s2idle: Rearrange the main suspend-to-idle loop PM / timekeeping: Print debug messages when requested PM / sleep: Mark suspend/hibernation start and finish PM / sleep: Do not print debug messages by default PM / suspend: Export pm_suspend_target_state

PM / s2idle: Rename freeze_state enum and related items

2017-08-10T23:29:55Z

Rename the freeze_state enum representing the suspend-to-idle state machine states to s2idle_states and rename the related variables and functions accordingly. Signed-off-by: Rafael J. Wysocki

PM / wakeup: Set power.can_wakeup if wakeup_sysfs_add() fails

2017-08-08T15:11:48Z

Currently, an error from wakeup_sysfs_add() in device_set_wakeup_capable() causes the device's power.can_wakeup flag to remain unset even though the device technically is capable of signaling wakeup. If wakeup_sysfs_add() fails user space may not be able to enable the device to wake up the system from sleep states, but at least for some devices that does not matter. For this reason, set or clear power.can_wakeup upfront and if wakeup_sysfs_add() returns an error, print a message to the log. Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-pm'

2017-07-03T12:23:09Z

* acpi-pm: PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems platform: x86: intel-hid: Wake up the system from suspend-to-idle platform: x86: intel-vbtn: Wake up the system from suspend-to-idle ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle platform/x86: Add driver for ACPI INT0002 Virtual GPIO device PCI / PM: Restore PME Enable if skipping wakeup setup PM / sleep: Print timing information if debug is enabled ACPI / PM: Clean up device wakeup enable/disable code ACPI / PM: Change log level of wakeup-related message USB / PCI / PM: Allow the PCI core to do the resume cleanup ACPI / PM: Run wakeup notify handlers synchronously Conflicts: drivers/base/power/main.c

PM / wakeirq: Convert to SRCU

2017-06-26T23:51:04Z

The wakeirq infrastructure uses RCU to protect the list of wakeirqs. That breaks the irq bus locking infrastructure, which is allows sleeping functions to be called so interrupt controllers behind slow busses, e.g. i2c, can be handled. The wakeirq functions hold rcu_read_lock and call into irq functions, which in case of interrupts using the irq bus locking will trigger a might_sleep() splat. Convert the wakeirq infrastructure to Sleepable RCU and unbreak it. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Brian Norris Suggested-by: Paul E. McKenney Signed-off-by: Thomas Gleixner Reviewed-by: Paul E. McKenney Tested-by: Tony Lindgren Tested-by: Brian Norris Cc: 4.2+ # 4.2+ Signed-off-by: Rafael J. Wysocki

ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle

2017-06-14T22:55:44Z

The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ during suspend-to-idle transitions and, consequently, any events signaled through it wake up the system from that state. However, on some systems some of the events signaled via the ACPI SCI while suspended to idle should not cause the system to wake up. In fact, quite often they should just be discarded. Arguably, systems should not resume entirely on such events, but in order to decide which events really should cause the system to resume and which are spurious, it is necessary to resume up to the point when ACPI SCIs are actually handled and processed, which is after executing dpm_resume_noirq() in the system resume path. For this reasons, add a loop around freeze_enter() in which the platforms can process events signaled via multiplexed IRQ lines like the ACPI SCI and add suspend-to-idle hooks that can be used for this purpose to struct platform_freeze_ops. In the ACPI case, the ->wake hook is used for checking if the SCI has triggered while suspended and deferring the interrupt-induced system wakeup until the events signaled through it are actually processed sufficiently to decide whether or not the system should resume. In turn, the ->sync hook allows all of the relevant event queues to be flushed so as to prevent events from being missed due to race conditions. In addition to that, some ACPI code processing wakeup events needs to be modified to use the "hard" version of wakeup triggers, so that it will cause a system resume to happen on device-induced wakeup events even if the "soft" mechanism to prevent the system from suspending is not enabled. However, to preserve the existing behavior with respect to suspend-to-RAM, this only is done in the suspend-to-idle case and only if an SCI has occurred while suspended. Signed-off-by: Rafael J. Wysocki

Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"

2017-06-06T22:57:37Z

Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) as it turned out to be premature and triggered a number of different issues on various systems. That includes, but is not limited to, premature suspend-to-RAM aborts on Dell XPS 13 (9343) reported by Dominik. The issue the commit in question attempted to address is real and will need to be taken care of going forward, but evidently more work is needed for this purpose. Reported-by: Dominik Brodowski Signed-off-by: Rafael J. Wysocki

PM / wakeup: Fix up wakeup_source_report_event()

2017-05-14T00:23:04Z

Commit 8a537ece3d94 (PM / wakeup: Integrate mechanism to abort transitions in progress) modified wakeup_source_report_event() and wakeup_source_activate() to make it possible to call pm_system_wakeup() from the latter if so indicated by the caller of the former (via a new function argument added by that commit), but it overlooked the fact that in some situations wakeup_source_report_event() is called to signal a "hard" event (ie. such that should abort a system suspend in progress) after pm_stay_awake() has been called for the same wakeup source object, in which case the pm_system_wakeup() will not trigger. To work around this issue, modify wakeup_source_activate() and wakeup_source_report_event() again so that pm_system_wakeup() is called by the latter directly (if its last argument is true), in which case the additional argument does not need to be passed to wakeup_source_activate() any more, so drop it from there. Fixes: 8a537ece3d94 (PM / wakeup: Integrate mechanism to abort transitions in progress) Reported-by: David E. Box Signed-off-by: Rafael J. Wysocki