kernel.git/drivers/base/power/runtime.c, branch linux-5.10.y

PM: runtime: Do not clear needs_force_resume with enabled runtime PM

2026-01-19T12:11:51Z

commit 359afc8eb02a518fbdd0cbd462c8c2827c6cbec2 upstream. Commit 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()") added provisional clearing of power.needs_force_resume to pm_runtime_reinit(), but it is done unconditionally which is a mistake because pm_runtime_reinit() may race with driver probing and removal [1]. To address this, notice that power.needs_force_resume should never be set when runtime PM is enabled and so it only needs to be cleared when runtime PM is disabled, and update pm_runtime_init() to only clear that flag when runtime PM is disabled. Fixes: 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()") Reported-by: Ed Tsai Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1] Signed-off-by: Rafael J. Wysocki Cc: 6.17+ # 6.17+ Reviewed-by: Ulf Hansson Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman

PM: runtime: Add new devm functions

2025-10-29T13:01:23Z

[ Upstream commit 73db799bf5efc5a04654bb3ff6c9bf63a0dfa473 ] Add `devm_pm_runtime_set_active_enabled()` and `devm_pm_runtime_get_noresume()` for simplifying common cases in drivers. Signed-off-by: Bence Csókás Link: https://patch.msgid.link/20250327195928.680771-3-csokas.bence@prolan.hu Signed-off-by: Rafael J. Wysocki Stable-dep-of: 0792c1984a45 ("iio: imu: inv_icm42600: Simplify pm_runtime setup") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()

2025-08-28T14:22:41Z

[ Upstream commit 89d9cec3b1e9c49bae9375a2db6dc49bc7468af0 ] Clear power.needs_force_resume in pm_runtime_reinit() in case it has been set by pm_runtime_force_suspend() invoked from a driver remove callback. Suggested-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net Signed-off-by: Sasha Levin

PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()

2025-06-27T10:04:15Z

[ Upstream commit 40d3b40dce375d6f1c1dbf08d79eed3aed6c691d ] pm_runtime_put_autosuspend() schedules a hrtimer to expire at "dev->power.timer_expires". If the hrtimer's callback, pm_suspend_timer_fn(), observes that the current time equals "dev->power.timer_expires", it unexpectedly bails out instead of proceeding with runtime suspend. pm_suspend_timer_fn(): if (expires > 0 && expires < ktime_get_mono_fast_ns()) { dev->power.timer_expires = 0; rpm_suspend(..) } Additionally, as ->timer_expires is not cleared, all the future auto suspend requests will not schedule hrtimer to perform auto suspend. rpm_suspend(): if ((rpmflags & RPM_AUTO) &&...) { if (!(dev->power.timer_expires && ...) { <-- this will fail. hrtimer_start_range_ns(&dev->power.suspend_timer,...); } } Fix this by as well checking if current time reaches the set expiration. Co-developed-by: Patrick Daly Signed-off-by: Patrick Daly Signed-off-by: Charan Teja Kalla Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: sleep: Adjust check before setting power.must_resume

2025-04-10T12:30:55Z

[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ] The check before setting power.must_resume in device_suspend_noirq() does not take power.child_count into account, but it should do that, so use pm_runtime_need_not_resume() in it for this purpose and adjust the comment next to it accordingly. Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling") Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net Signed-off-by: Sasha Levin

PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()

2024-02-23T07:42:32Z

[ Upstream commit b4060db9251f919506e4d672737c6b8ab9a84701 ] The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. >From grepping code, it's clear that many people aren't aware of the need to call pm_runtime_dont_use_autosuspend(). When brainstorming solutions, one idea that came up was to leverage the new-ish devm_pm_runtime_enable() function. The idea here is that: * When the devm action is called we know that the driver is being removed. It's the perfect time to undo the use_autosuspend. * The code of pm_runtime_dont_use_autosuspend() already handles the case of being called when autosuspend wasn't enabled. Suggested-by: Laurent Pinchart Signed-off-by: Douglas Anderson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

PM: runtime: add devm_pm_runtime_enable helper

2024-02-23T07:42:32Z

[ Upstream commit b3636a3a2c51715736d3ec45f635ed03191962ce ] A typical code pattern for pm_runtime_enable() call is to call it in the _probe function and to call pm_runtime_disable() both from _probe error path and from _remove function. For some drivers the whole remove function would consist of the call to pm_remove_disable(). Add helper function to replace this bolierplate piece of code. Calling devm_pm_runtime_enable() removes the need for calling pm_runtime_disable() both in the probe()'s error path and in the remove() function. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org Acked-by: Rafael J. Wysocki Signed-off-by: Stephen Boyd Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

PM / wakeirq: support enabling wake-up irq after runtime_suspend called

2023-08-11T09:57:55Z

[ Upstream commit 259714100d98b50bf04d36a21bf50ca8b829fc11 ] When the dedicated wake IRQ is level trigger, and it uses the device's low-power status as the wakeup source, that means if the device is not in low-power state, the wake IRQ will be triggered if enabled; For this case, need enable the wake IRQ after running the device's ->runtime_suspend() which make it enter low-power state. e.g. Assume the wake IRQ is a low level trigger type, and the wakeup signal comes from the low-power status of the device. The wakeup signal is low level at running time (0), and becomes high level when the device enters low-power state (runtime_suspend (1) is called), a wakeup event at (2) make the device exit low-power state, then the wakeup signal also becomes low level. ------------------ | ^ ^| ---------------- | | -------------- |<---(0)--->|<--(1)--| (3) (2) (4) if enable the wake IRQ before running runtime_suspend during (0), a wake IRQ will arise, it causes resume immediately; it works if enable wake IRQ ( e.g. at (3) or (4)) after running ->runtime_suspend(). This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to optionally support enabling wake IRQ after running ->runtime_suspend(). Suggested-by: Rafael J. Wysocki Signed-off-by: Chunfeng Yun Signed-off-by: Rafael J. Wysocki Stable-dep-of: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming") Signed-off-by: Sasha Levin

PM: runtime: Do not call __rpm_callback() from rpm_idle()

2023-01-14T09:15:21Z

[ Upstream commit bc80c2e438dcbfcf748452ec0f7ad5b79ff3ad88 ] Calling __rpm_callback() from rpm_idle() after adding device links support to the former is a clear mistake. Not only it causes rpm_idle() to carry out unnecessary actions, but it is also against the assumption regarding the stability of PM-runtime status across __rpm_callback() invocations, because rpm_suspend() and rpm_resume() may run in parallel with __rpm_callback() when it is called by rpm_idle() and the device's PM-runtime status can be updated by any of them. Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com Signed-off-by: Rafael J. Wysocki Reviewed-by: Adrian Hunter Signed-off-by: Sasha Levin

PM: runtime: Improve path in rpm_idle() when no callback

2023-01-14T09:15:21Z

[ Upstream commit 5a2bd1b1c64e1ac5627db3767ac465f18606315c ] When pm_runtime_no_callbacks() has been called for a struct device to set the dev->power.no_callbacks flag for it, it enables rpm_idle() to take a slightly quicker path by assuming that a ->runtime_idle() callback would have returned 0 to indicate success. A device that does not have the dev->power.no_callbacks flag set for it, may still be missing a corresponding ->runtime_idle() callback, in which case the slower path in rpm_idle() is taken. Let's improve the behaviour for this case, by aligning code to the quicker path. Signed-off-by: Ulf Hansson Acked-by: Alan Stern Signed-off-by: Rafael J. Wysocki Stable-dep-of: bc80c2e438dc ("PM: runtime: Do not call __rpm_callback() from rpm_idle()") Signed-off-by: Sasha Levin