kernel.git/drivers/ata/libata-sff.c, branch linux-2.6.23.y

libata-sff: Fix documentation

2007-09-20T19:58:26Z

Code moved to ioread/iowrite but the comment didn't Also note a posting issue Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

libata-sff; Unbreak non DMA capable controllers again

2007-08-01T14:00:56Z

Seems nobody else is checking/testing this case as it keeps getting horked. If we have no BAR4 mapping on an SFF controller this is *NOT* an error, it just means it isn't doing BMDMA. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

[libata] Fix reported task file values in sense data

2007-07-20T11:44:44Z

ata_tf_read was setting HOB bit when lba48 command was submitted, but was not clearing it before reading "normal" data. As it is only place which sets HOB bit in control register, and register reads should not be affected by other bits, let's just clear it when we are done with reading upper bytes so non-48bit commands do not have to touch ctl at all. pata_scc suffered from same problem... Signed-off-by: Petr Vandrovec Signed-off-by: Jeff Garzik

Correct comment in libata-sff.c

2007-07-20T11:16:24Z

The filename in the file header is incorrect. Signed-off-by: Dave Jones Signed-off-by: Jeff Garzik

libata: simplify PCI legacy SFF host handling

2007-07-11T01:27:09Z

With PCI resource fix up for legacy hosts. We can use the same code path to allocate IO resources and initialize host for both legacy and native SFF hosts. Only IRQ requesting needs to be different. Rename ata_pci_*_native_host() to ata_pci_*_sff_host(), kill all legacy specific functions and use the renamed functions instead. This simplifies code a lot. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik

libata: fix assigned IRQ reporting

2007-07-03T14:06:35Z

host->irq and host->irq2 should be set before ata_host_register() for IRQ reporting to work. Move up host->irq assignment in ata_host_activate() and add it to ata_pci_init_one() native path and pata_cs5520. The port info printing in ata_host_register() doesn't fit all the different controllers. It should probably be moved out to LLDs with some helpers in the future. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik

libata-core/sff: Fix multiple assumptions about DMA

2007-06-10T02:40:28Z

The ata IRQ ack functions are only used when debugging. Unfortunately almost every controller that calls them can cause crashes in some configurations as there are missing checks for bmdma presence. In addition ata_port_start insists of installing DMA buffers and pad buffers for controllers regardless. The SFF controllers actually need to make that decision dynamically at controller setup time and all need the same helper - so we add ata_sff_port_start. Future patches will switch the SFF drivers to use this. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

libata: clean up SFF init mess

2007-05-11T22:09:18Z

The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik

libata: honour host controllers that want just one host

2007-05-01T00:43:48Z

The Marvell IDE interface on my machine would hit a BUG_ON() in lib/iomem.c because it was calling ata_pci_init_one() specifying just a single port on the host, but that would actually end up trying to initialize two ports, the second one with bogus information. This fixes "ata_pci_init_one()" so that it actually passes down the n_ports variable that it got from the low-level driver to the host allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA layer actually having the correct port number information. And in order to make it all work, I also needed to fix a few places that had incorrectly hard-coded the fact that a host always had exactly two ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would just always iterate over both ports). Acked-by: Jeff Garzik Signed-off-by: Linus Torvalds

libata: kill probe_ent and related helpers

2007-04-28T18:16:06Z

All drivers are converted to new init model. Kill probe_ent, ata_device_add() and ata_pci_init_native_mode(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik