kernel.git/drivers/ata/libata-eh.c, branch linux-5.18.y

ata: add/use ata_taskfile::{error|status} fields

2022-02-20T00:06:05Z

Add the explicit error and status register fields to 'struct ata_taskfile' using the anonymous *union*s ('struct ide_taskfile' had that for ages!) and update the libata taskfile code accordingly. There should be no object code changes resulting from that... Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: libata-acpi: kill ata_acpi_on_suspend()

2022-02-02T07:56:49Z

Since the commit c05e6ff035c1b25d17364a685432 ("libata-acpi: implement and use ata_acpi_init_gtm()") ata_acpi_on_suspend() just returns 0, so its call from ata_eh_handle_port_suspend() doesn't make sense anymore. Remove the function completely, at last... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: libata: drop ata_msg_drv()

2022-01-05T10:33:02Z

Callers are already protected by ata_dev_print_info(), so no need to have an additional configuration parameter here. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal

ata: libata: revamp ata_get_cmd_descript()

2022-01-05T10:33:01Z

Rename ata_get_cmd_descrip() to ata_get_cmd_name() and simplify it to return "unknown" instead of NULL. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal

ata: libata: add tracepoints for ATA error handling

2022-01-05T10:33:01Z

Add tracepoints for ATA error handling. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal

ata: libata: add reset tracepoints

2022-01-04T11:00:57Z

To follow the flow of control we should be using tracepoints, as they will tie in with the actual I/O flow and deliver a better overview about what it happening. This patch adds tracepoints for hard reset, soft reset, and postreset and adds them in the libata-eh control flow. With that we can drop the reset DPRINTK calls in the various drivers. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal

libata: fix read log timeout value

2021-11-11T01:55:32Z

Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal

scsi: ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request

2021-08-12T02:25:37Z

Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-8-bvanassche@acm.org Cc: Jens Axboe Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Ming Lei Reviewed-by: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-04-29T00:22:10Z

Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...

libata: Fix fall-through warnings for Clang

2021-04-20T20:23:17Z

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Jens Axboe