kernel.git/drivers/ata/libahci.c, branch linux-5.16.y

ata: libahci: Adjust behavior when StorageD3Enable _DSD is set

2021-11-18T05:34:25Z

The StorageD3Enable _DSD is used for the vendor to indicate that the disk should be opted into or out of a different behavior based upon the platform design. For AMD's Renoir and Green Sardine platforms it's important that any attached SATA storage has transitioned into DevSlp when s2idle is used. If the disk is left in active/partial/slumber, then the system is not able to resume properly. When the StorageD3Enable _DSD is detected, check the system is using s2idle and DevSlp is enabled and if so explicitly wait long enough for the disk to enter DevSlp. Cc: Nehal-bakulchandra Shah BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello Signed-off-by: Damien Le Moal

libata: libahci: declare ahci_shost_attr_group as static

2021-11-11T23:05:47Z

ahci_shost_attr_group is referenced only in drivers/ata/libahci.c. Declare it as static. Fixes: c3f69c7f629f ("scsi: ata: Switch to attribute groups") Cc: Bart Van Assche Signed-off-by: Damien Le Moal Reviewed-by: Christoph Hellwig

scsi: ata: Switch to attribute groups

2021-10-17T01:45:52Z

struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-3-bvanassche@acm.org Acked-by: Damien Le Moal Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

libata: Introduce ncq_prio_supported sysfs sttribute

2021-08-18T13:19:39Z

Currently, the only way a user can determine if a SATA device supports NCQ priority is to try to enable the use of this feature using the ncq_prio_enable sysfs device attribute. If enabling the feature fails, it is because the device does not support NCQ priority. Otherwise, the feature is enabled and success indicates that the device supports NCQ priority. Improve this odd interface by introducing the read-only ncq_prio_supported sysfs device attribute to indicate if a SATA device supports NCQ priority. The value of this attribute reflects the status of device flag ATA_DFLAG_NCQ_PRIO, which is set only for devices supporting NCQ priority. Add this new sysfs attribute to the device attributes group of libahci and libata-sata. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20210816014456.2191776-10-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

ata: ahci: Disable SXS for Hisilicon Kunpeng920

2021-03-31T14:25:15Z

On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of SATA controller. In some scenarios, some ports are not external SATA ports, and it cause disks connected to these ports to be identified as removable disks. So disable the SXS capability on the software side to prevent users from mistakenly considering non-removable disks as removable disks and performing related operations. Signed-off-by: Xingui Yang Signed-off-by: Luo Jiaxing Reviewed-by: John Garry Link: https://lore.kernel.org/r/1615544676-61926-1-git-send-email-luojiaxing@huawei.com Signed-off-by: Jens Axboe

ata: make qc_prep return ata_completion_errors

2019-11-01T14:50:51Z

In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby Cc: Jens Axboe Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe

ahci: Do not export local variable ahci_em_messages

2019-08-30T20:25:57Z

The commit ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly") moved ahci_em_messages to be static while missing the fact of exporting it. WARNING: "ahci_em_messages" [vmlinux] is a static EXPORT_SYMBOL_GPL Drop export for the local variable ahci_em_messages. Fixes: ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly") Cc: Chuansheng Liu Signed-off-by: Andy Shevchenko Signed-off-by: Jens Axboe

ata: libahci: Remove call to memset after dmam_alloc_coherent

2019-06-29T15:42:23Z

In commit af7ddd8a627c ("Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping"), dmam_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang Signed-off-by: Jens Axboe

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18

2019-05-21T09:28:46Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Jilayne Lovejoy Reviewed-by: Steve Winslow Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de Signed-off-by: Greg Kroah-Hartman

ata: libahci: Only warn for AHCI_HFLAG_MULTI_MSI set when genuine custom irq handler implemented

2019-02-28T21:07:48Z

For an AHCI controller with AHCI_HFLAG_MULTI_MSI flag set, we may get the following log, regardless of whether a custom irq handler was implemented or not: [ 14.700238] ahci 0000:74:03.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented This is because we can set hpriv->irq_handler to ahci_single_level_irq_intr() if not already set, in ahci_init_one()->ahci_pci_save_initial_config()->ahci_save_initial_config(). Stop having this warn being misleading by adding a check for hpriv->irq_handler != ahci_single_level_irq_intr. Signed-off-by: John Garry Signed-off-by: Jens Axboe