kernel.git/drivers/ata/ahci.c, branch linux-5.16.y

ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile

2021-11-18T05:34:25Z

AMD requires that the SATA controller be configured for devsleep in order for S0i3 entry to work properly. commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile platforms that are using s0ix. Add the PCI ID for the SATA controller in Green Sardine platforms to extend this policy by default for AMD based systems using s0i3 as well. Cc: Nehal-bakulchandra Shah BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Signed-off-by: Mario Limonciello Signed-off-by: Damien Le Moal

Add AHCI support for ASM1062+JBM575 cards

2021-10-12T01:00:36Z

Add support for PCIe SATA expander cards based on ASMedia 1062 + JBM575 controllers. These cards can provide up to 10 or more SATA ports on one PCIe card. Signed-off-by: István Pongrácz Signed-off-by: Damien Le Moal

ahci: remove duplicated PCI device IDs

2021-09-21T01:02:31Z

Intel devices 0x2822, 0x2823, 0x2826 and 0x2827 are already on the list as Lewisburg AHCI/RAID. They use same configuration except 0x2822 which has board_ahci_nosntf (for ICH8). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Hans de Goede Signed-off-by: Damien Le Moal

ahci: Add support for Dell S140 and later controllers

2021-06-15T21:43:58Z

This patch enables support for Dell S140 and later controllers that use Intel's PCHs configured as PCI_CLASS_STORAGE_RAID. Reviewed-by: Mika Westerberg Signed-off-by: Charles Rose Link: https://lore.kernel.org/r/20210615190801.1744466-1-charles.rose@dell.com Signed-off-by: Jens Axboe

ata: ahci: Disable SXS for Hisilicon Kunpeng920

2021-03-31T14:25:15Z

On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of SATA controller. In some scenarios, some ports are not external SATA ports, and it cause disks connected to these ports to be identified as removable disks. So disable the SXS capability on the software side to prevent users from mistakenly considering non-removable disks as removable disks and performing related operations. Signed-off-by: Xingui Yang Signed-off-by: Luo Jiaxing Reviewed-by: John Garry Link: https://lore.kernel.org/r/1615544676-61926-1-git-send-email-luojiaxing@huawei.com Signed-off-by: Jens Axboe

ahci: Add Intel Rocket Lake PCH-H RAID PCI IDs

2020-10-02T20:51:52Z

Add Intel Rocket Lake PCH-H RAID PCI IDs to the list of supported controllers. Signed-off-by: Mika Westerberg Signed-off-by: Jens Axboe

ata: ahci: use ata_link_info() instead of ata_link_printk()

2020-08-17T03:45:36Z

Using ata_link_info() instead of ata_link_printk(). Signed-off-by: Xu Wang Signed-off-by: Jens Axboe

ahci: Add Intel Comet Lake PCH-U PCI ID

2020-04-16T16:26:52Z

Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers. Set default SATA LPM so the SoC can enter S0ix. Signed-off-by: Kai-Heng Feng Signed-off-by: Jens Axboe

ahci: Add Intel Comet Lake PCH RAID PCI ID

2020-04-09T15:31:38Z

Intel Comet Lake should use the default LPM policy for mobile chipsets. So, add the PCI ID to the driver list of supported devices. Signed-off-by: Jian-Hong Pan Signed-off-by: Jens Axboe

ata: ahci: Add sysfs attribute to show remapped NVMe device count

2020-04-07T22:07:38Z

Add a new sysfs attribute to show how many NVMe devices are remapped. Userspace like distro installer can use this info to ask user to change the BIOS setting. Signed-off-by: Kai-Heng Feng Signed-off-by: Jens Axboe