kernel.git/drivers/ata/Kconfig, branch linux-2.6.25.y

ACPI: fix ATA_ACPI build

2008-03-18T04:26:07Z

drivers/ata/libata-acpi.c fails to build drivers/built-in.o: In function `ata_acpi_associate': (.text+0x7106a): undefined reference to `register_hotplug_dock_device' When CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m But if dock is selected from ata_acpi, dock will =y when ata_acpi=y, avoiding this problem. http://bugzilla.kernel.org/show_bug.cgi?id=10272 Signed-off-by: Len Brown

[libata] Add support for the RB500 PATA CompactFlash

2008-03-11T00:54:05Z

Signed-off-by: Jeff Garzik

sata_mv: Remove PCI dependency

2008-02-01T17:26:37Z

The integrated SATA controller is connected directly to the SoC's internal bus, not via PCI interface. this patch removes the dependency on the PCI interface. Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik

Merge branch 'linux-2.6'

2008-01-31T00:25:51Z

[POWERPC] 83xx: enable FSL SATA driver config for Freescale SoCs

2008-01-28T14:33:02Z

The mpc8315 shares the same SATA controller as the mpc837x, and likelihood is that future SoCs from Freescale will also. Signed-off-by: Jerry Huang Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala

pata_ninja32: Cardbus ATA initial support

2008-01-23T10:24:10Z

Lots of work needed to bring it up to scratch but it does work so you can now use the card. That makes it at least useful, especially as the other cardbus cards are usually INIC162x which aren't yet supported well. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

libata: pata_of_platform: OF-Platform PATA device driver

2008-01-15T16:23:43Z

This driver nicely wraps around pata_platform library functions, and provides OF platform bus bindings to the PATA devices. Also add || PPC to the PATA_PLATFORM's "depends on" Kconfig entry, needed for PA Semi Electra. Signed-off-by: Anton Vorontsov Signed-off-by: Olof Johansson

Update libata driver for bf548 atapi controller against the 2.6.24 tree.

2007-10-18T00:49:02Z

Changes: 1. Remove irq_ack() and port_disable() methods 2. Acocomodate for the libata-link patches 3. Change Kconfig ATAPI mode option into a module param. 4. Add supported WMDMA mode. Signed-off-by: Sonic Zhang Signed-off-by: Jeff Garzik

drivers/ata: add support to Freescale 3.0Gbps SATA Controller

2007-10-18T00:49:02Z

This patch adds support for Freescale 3.0Gbps SATA Controller supporting Native Command Queueing(NCQ), device hotplug, and ATAPI. This controller can be found on MPC8315 and MPC8378. Signed-off-by: Ashish Kalra Signed-off-by: Li Yang Signed-off-by: Jeff Garzik

pata_cs5536: ATA driver for Geode companion chip

2007-10-15T19:44:18Z

This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: Martin K. Petersen Signed-off-by: Jeff Garzik