kernel.git/drivers/acpi/x86, branch linux-6.9.y

ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets

2024-06-27T11:52:13Z

[ Upstream commit d8f20383a2fc3a3844b08a4999cf0e81164a0e56 ] The x86 Android tablets on which quirks to skip looking for a matching UartSerialBus resource and instead unconditionally create a serial bus device (serdev) are necessary there are 2 sorts of serialports: ACPI enumerated highspeed designware UARTs, these are the ones which typcially need to be skipped since they need a serdev for the attached BT HCI. A PNP enumerated UART which is part of the PCU. So far the existing quirks have ignored this. But on the Lenovo Yoga Tablet 2 Pro 1380 models this is used for a custom fastcharging protocol. There is a Micro USB switch which can switch the USB data lines to this uart and then a 600 baud protocol is used to configure the charger for a voltage higher then 5V. Add a new ACPI_QUIRK_PNP_UART1_SKIP quirk type and set this for the existing entry for the Lenovo Yoga Tablet 2 830 / 1050 models. Note this will lead to unnecessarily also creating a serdev for the PCU UART on the 830 / 1050 which don't need this, but the UART is not used otherwise there so that is not a problem. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: x86: Force StorageD3Enable on more products

2024-06-21T12:40:28Z

commit e79a10652bbd320649da705ca1ea0c04351af403 upstream. A Rembrandt-based HP thin client is reported to have problems where the NVME disk isn't present after resume from s2idle. This is because the NVME disk wasn't put into D3 at suspend, and that happened because the StorageD3Enable _DSD was missing in the BIOS. As AMD's architecture requires that the NVME is in D3 for s2idle, adjust the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT advertises low power idle support. This will ensure that any future products with this BIOS deficiency don't need to be added to the allow list of overrides. Cc: All applicable Signed-off-by: Mario Limonciello Acked-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functions

2024-04-23T19:50:15Z

Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") attempted to avoid evaluating the same Low- Power S0 Idle _DSM functions for different UUIDs, but that turns out to be a mistake, because some systems in the field are adversely affected by it. Address this by allowing all Low-Power S0 Idle _DSM functions to be evaluated, but still print the message regarding duplication of Low- Power S0 Idle _DSM function sets for different UUIDs. Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750 Reported-and-tested-by: Mark Pearson Suggested-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki Reviewed-by: Mario Limonciello

Merge branches 'acpi-x86', 'acpi-video', 'acpi-apei' and 'acpi-misc'

2024-03-11T13:42:30Z

Merge x86-specific ACPI changes, an ACPI backlight driver change, ACPI APEI change and miscellaneous ACPI-related changes for 6.9-rc1: - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and make that function generic (Hans de Goede). - Make the ACPI backlight code handle fetching EDID that is longer than 256 bytes (Mario Limonciello). - Skip initialization of GHES_ASSIST structures for Machine Check Architecture in APEI (Avadhut Naik). - Convert several plaform drivers in the ACPI subsystem to using a remove callback that returns void (Uwe Kleine-König). - Drop the long-deprecated custom_method debugfs interface that is problematic from the security standpoint (Rafael Wysocki). - Use %pe in a couple of places in the ACPI code for easier error decoding (Onkarnath). * acpi-x86: ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS * acpi-video: ACPI: video: Handle fetching EDID that is longer than 256 bytes * acpi-apei: ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture ACPI: APEI: GHES: Convert to platform remove callback returning void * acpi-misc: ACPI: pfr_update: Convert to platform remove callback returning void ACPI: pfr_telemetry: Convert to platform remove callback returning void ACPI: fan: Convert to platform remove callback returning void ACPI: GED: Convert to platform remove callback returning void ACPI: DPTF: Convert to platform remove callback returning void ACPI: AGDI: Convert to platform remove callback returning void ACPI: TAD: Convert to platform remove callback returning void ACPI: Drop the custom_method debugfs interface ACPI: use %pe for better readability of errors while printing

ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration()

2024-02-22T10:13:18Z

Some recent(ish) Dell AIO devices have a backlight controller board connected to an UART. This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device with an UartSerialBusV2() resource to model the backlight-controller. This causes the kernel to create a /dev/ttyS0 char-device for the UART instead of creating an in kernel serdev-controller + serdev-device pair for a kernel backlight driver. Use the existing acpi_quirk_skip_serdev_enumeration() mechanism to work around this by returning skip=true for tty-ctrl parents with a HID of DELL0501. Like other cases where the UartSerialBusV2() resource is missing or broken this will only create the serdev-controller device and the serdev-device itself will need to be instantiated by platform code. Unfortunately in this case there is no device for the platform-code instantiating the serdev-device to bind to. So also create a platform_device for this. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS

2024-02-22T10:13:18Z

ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems

2024-02-12T13:24:43Z

Systems based on Intel platforms that use the MSFT UUID for Low-Power S0 Idle (LPS0) have started to ship, so allow the kernel to use the MSFT UUID in the non-AMD case too, but in that case make it avoid evaluating the same _DSM function for two different UUIDs and prioritize the MSFT one. While at it, combine two MSFT _DSM function mask checks in acpi_s2idle_restore_early() so as to make it reflect the acpi_s2idle_prepare_late() flow more closely and adjust the Modern Standby entry and exit comments slightly. Non-AMD systems that do not support MSFT UUID for Low-power S0 Idle are not expected to be affected by this change in any way. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mario Limonciello

Merge branches 'acpi-ec', 'acpi-sysfs', 'acpi-misc' and 'acpi-uid'

2023-10-26T12:59:52Z

Merge ACPI EC driver updates, ACPI sysfs interface updates, misc updates related to ACPI and changes related to ACPI _UID handling for 6.7-rc1: - Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan Denose). - Fix and clean up create_pnp_modalias() and create_of_modalias() (Christophe JAILLET). - Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy Shevchenko). - Define acpi_dev_uid_match() for matching _UID and use it in several places (Raag Jadav). - Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav). * acpi-ec: ACPI: EC: Add quirk for HP 250 G7 Notebook PC * acpi-sysfs: ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias() ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias() * acpi-misc: ACPI: x86: s2idle: Switch to use acpi_evaluate_dsm_typed() ACPI: PCI: Switch to use acpi_evaluate_dsm_typed() * acpi-uid: perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID ACPI: x86: use acpi_dev_uid_match() for matching _UID ACPI: utils: use acpi_dev_uid_match() for matching _UID pinctrl: intel: use acpi_dev_uid_match() for matching _UID ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID perf: qcom: use acpi_device_uid() for fetching _UID ACPI: sysfs: use acpi_device_uid() for fetching _UID

ACPI: x86: use acpi_dev_uid_match() for matching _UID

2023-10-24T19:49:27Z

Convert manual _UID references to use the standard ACPI helper. Signed-off-by: Raag Jadav Reviewed-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI: x86: s2idle: Switch to use acpi_evaluate_dsm_typed()

2023-10-03T13:50:03Z

The acpi_evaluate_dsm_typed() provides a way to check the type of the object evaluated by _DSM call. Use it instead of open coded variant. Signed-off-by: Andy Shevchenko Reviewed-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki