kernel.git/drivers/acpi/x86/utils.c, branch linux-6.10.y

ACPI: x86: Force StorageD3Enable on more products

2024-06-07T18:24:07Z

A Rembrandt-based HP thin client is reported to have problems where the NVME disk isn't present after resume from s2idle. This is because the NVME disk wasn't put into D3 at suspend, and that happened because the StorageD3Enable _DSD was missing in the BIOS. As AMD's architecture requires that the NVME is in D3 for s2idle, adjust the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT advertises low power idle support. This will ensure that any future products with this BIOS deficiency don't need to be added to the allow list of overrides. Cc: All applicable Signed-off-by: Mario Limonciello Acked-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets

2024-04-08T14:50:47Z

The x86 Android tablets on which quirks to skip looking for a matching UartSerialBus resource and instead unconditionally create a serial bus device (serdev) are necessary there are 2 sorts of serialports: ACPI enumerated highspeed designware UARTs, these are the ones which typcially need to be skipped since they need a serdev for the attached BT HCI. A PNP enumerated UART which is part of the PCU. So far the existing quirks have ignored this. But on the Lenovo Yoga Tablet 2 Pro 1380 models this is used for a custom fastcharging protocol. There is a Micro USB switch which can switch the USB data lines to this uart and then a 600 baud protocol is used to configure the charger for a voltage higher then 5V. Add a new ACPI_QUIRK_PNP_UART1_SKIP quirk type and set this for the existing entry for the Lenovo Yoga Tablet 2 830 / 1050 models. Note this will lead to unnecessarily also creating a serdev for the PCU UART on the 830 / 1050 which don't need this, but the UART is not used otherwise there so that is not a problem. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: utils: Mark SMO8810 accel on Dell XPS 15 9550 as always present

2024-04-08T14:50:46Z

The Dell XPS 15 9550 has a SMO8110 accelerometer / HDD freefall sensor which is wrongly marked as not present. Mark this as always present so that the dell-smo8800 driver can bind to it. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration()

2024-02-22T10:13:18Z

Some recent(ish) Dell AIO devices have a backlight controller board connected to an UART. This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device with an UartSerialBusV2() resource to model the backlight-controller. This causes the kernel to create a /dev/ttyS0 char-device for the UART instead of creating an in kernel serdev-controller + serdev-device pair for a kernel backlight driver. Use the existing acpi_quirk_skip_serdev_enumeration() mechanism to work around this by returning skip=true for tty-ctrl parents with a HID of DELL0501. Like other cases where the UartSerialBusV2() resource is missing or broken this will only create the serdev-controller device and the serdev-device itself will need to be instantiated by platform code. Unfortunately in this case there is no device for the platform-code instantiating the serdev-device to bind to. So also create a platform_device for this. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS

2024-02-22T10:13:18Z

ACPI: x86: use acpi_dev_uid_match() for matching _UID

2023-10-24T19:49:27Z

Convert manual _UID references to use the standard ACPI helper. Signed-off-by: Raag Jadav Reviewed-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI: processor: Move MWAIT quirk out of acpi_processor.c

2023-07-14T15:59:40Z

Commit 2a2a64714d9c ("ACPI: Disable MWAIT via DMI on broken Compal board") introduced a workaround for MWAIT for a specific x86 system. Move the code outside of acpi_processor.c to acpi/x86/ directory for consistency and rename the functions associated with it, so their names start with "acpi_proc_quirk_" to make the goal obvious. No intentional functional impact. Suggested-by: Rafael J. Wysocki Signed-off-by: Michal Wilczynski [ rjw: Subject and changelog edits, two function names changed ] Signed-off-by: Rafael J. Wysocki

ACPI: x86: Add ACPI_QUIRK_UART1_SKIP for Lenovo Yoga Book yb1-x90f/l

2023-05-18T18:17:56Z

The Lenovo Yoga Book yb1-x90f/l 2-in-1 which ships with Android as Factory OS has (another) bug in its DSDT where the UART resource for the BTH0 ACPI device contains "\\_SB.PCIO.URT1" as path to the UART. Note that is with a letter 'O' instead of the number '0' which is wrong. This causes Linux to instantiate a standard /dev/ttyS? device for the UART instead of a /sys/bus/serial device, which in turn causes bluetooth to not work. Similar DSDT bugs have been encountered before and to work around those the acpi_quirk_skip_serdev_enumeration() helper exists. Previous devices had the broken resource pointing to the first UART, while the BT HCI was on the second UART, which ACPI_QUIRK_UART1_TTY_UART2_SKIP deals with. Add a new ACPI_QUIRK_UART1_SKIP quirk for skipping enumeration of UART1 instead for the Yoga Book case and add this quirk to the existing DMI quirk table entry for the yb1-x90f/l . This leaves the UART1 controller unbound allowing the x86-android-tablets module to manually instantiate a serdev for it fixing bluetooth. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: Add skip i2c clients quirk for Nextbook Ares 8A

2023-05-17T18:26:43Z

The Nextbook Ares 8A is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there (the Android x86 kernel fork ignores I2C devices described in the DSDT). On this specific model this just not cause resource conflicts, one of the probe() calls for the non existing i2c_clients actually ends up toggling a GPIO or executing a _PS3 after a failed probe which turns the tablet off. Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the acpi_quirk_skip_dmi_ids table to avoid the bogus i2c_clients and to fix the tablet turning off during boot because of this. Also add the "10EC5651" HID for the RealTek ALC5651 codec used in this tablet to the list of HIDs for which not to skipi2c_client instantiation, since the Intel SST sound driver relies on the codec being instantiated through ACPI. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001

2023-04-27T16:48:29Z

The LSM303D on the Lenovo Yoga Tablet 2 series is present as both ACCL0001 and MAGN0001. As we can only ever register an i2c client for one of them, ignore MAGN0001. Currently this errors: i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16) Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch Reviewed-by: Hans de Goede Signed-off-by: Rafael J. Wysocki