kernel.git/drivers/acpi/sleep.c, branch linux-5.19.y

ACPI: PM: save NVS memory for Lenovo G40-45

2022-08-17T13:14:04Z

[ Upstream commit 4b7ef7b05afcde44142225c184bf43a0cd9e2178 ] [821d6f0359b0614792ab8e2fb93b503e25a65079] is to make machines produced from 2012 to now not saving NVS region to accelerate S3. But, Lenovo G40-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Signed-off-by: Manyi Li Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

Merge back reboot/poweroff notifiers rework for 5.19-rc1.

2022-05-25T12:38:29Z

ACPI: power: Switch to sys-off handler API

2022-05-19T17:30:31Z

Switch to sys-off API that replaces legacy pm_power_off callbacks, allowing us to remove global pm_* variables and support chaining of all restart and power-off modes consistently. Signed-off-by: Dmitry Osipenko Signed-off-by: Rafael J. Wysocki

ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default

2022-05-12T14:56:58Z

ASUS B1400CEAE fails to resume from suspend to idle by default. This was bisected back to commit df4f9bc4fb9c ("nvme-pci: add support for ACPI StorageD3Enable property") but this is a red herring to the problem. Before this commit the system wasn't getting into deepest sleep state. Presumably this commit is allowing entry into deepest sleep state as advertised by firmware, but there are some other problems related to the wakeup. As it is confirmed the system works properly with S3, set the default for this system to S3. Reported-by: Jian-Hong Pan Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742 Signed-off-by: Mario Limonciello Tested-by: Jian-Hong Pan Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-03-21T21:26:28Z

Pull power management updates from Rafael Wysocki: "These are mostly fixes and cleanups all over the code and a new piece of documentation for Intel uncore frequency scaling. Functionality-wise, the intel_idle driver will support Sapphire Rapids Xeons natively now (with some extra facilities for controlling C-states more precisely on those systems), virtual guests will take the ACPI S4 hardware signature into account by default, the intel_pstate driver will take the defualt EPP value from the firmware, cpupower utility will support the AMD P-state driver added in the previous cycle, and there is a new tracer utility for that driver. Specifics: - Allow device_pm_check_callbacks() to be called from interrupt context without issues (Dmitry Baryshkov). - Modify devm_pm_runtime_enable() to automatically handle pm_runtime_dont_use_autosuspend() at driver exit time (Douglas Anderson). - Make the schedutil cpufreq governor use to_gov_attr_set() instead of open coding it (Kevin Hao). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the cpufreq longhaul driver (Rafael Wysocki). - Unify show() and store() naming in cpufreq and make it use __ATTR_XX (Lianjie Zhang). - Make the intel_pstate driver use the EPP value set by the firmware by default (Srinivas Pandruvada). - Re-order the init checks in the powernow-k8 cpufreq driver (Mario Limonciello). - Make the ACPI processor idle driver check for architectural support for LPI to avoid using it on x86 by mistake (Mario Limonciello). - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add 'preferred_cstates' module argument to the intel_idle driver to work around C1 and C1E handling issue on Sapphire Rapids (Artem Bityutskiy). - Add core C6 optimization on Sapphire Rapids to the intel_idle driver (Artem Bityutskiy). - Optimize the haltpoll cpuidle driver a bit (Li RongQing). - Remove leftover text from intel_idle() kerneldoc comment and fix up white space in intel_idle (Rafael Wysocki). - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). - Add DTPM hierarchy description (Daniel Lezcano). - Change the locking scheme in DTPM (Daniel Lezcano). - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer release (Daniel Lezcano). - Make dtpm_node_callback[] static (kernel test robot). - Fix spelling mistake "initialze" -> "initialize" in dtpm_create_hierarchy() (Colin Ian King). - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui)" * tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits) cpufreq: powernow-k8: Re-order the init checks cpuidle: intel_idle: Drop redundant backslash at line end cpuidle: intel_idle: Update intel_idle() kerneldoc comment PM: hibernate: Honour ACPI hardware signature by default for virtual guests cpufreq: intel_pstate: Use firmware default EPP cpufreq: unify show() and store() naming and use __ATTR_XX PM: core: keep irq flags in device_pm_check_callbacks() cpuidle: haltpoll: Call cpuidle_poll_state_init() later Documentation: amd-pstate: add tracer tool introduction tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state tools/power/x86/intel_pstate_tracer: make tracer as a module cpufreq: amd-pstate: Add more tracepoint for AMD P-State module PM: sleep: Add device name to suspend_report_result() turbostat: fix PC6 displaying on some systems intel_idle: add core C6 optimization for SPR intel_idle: add 'preferred_cstates' module argument intel_idle: add SPR support PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend() ACPI: processor idle: Check for architectural support for LPI cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function ...

PM: hibernate: Honour ACPI hardware signature by default for virtual guests

2022-03-16T18:29:32Z

The ACPI specification says that OSPM should refuse to restore from hibernate if the hardware signature changes, and should boot from scratch. However, real BIOSes often vary the hardware signature in cases where we *do* want to resume from hibernate, so Linux doesn't follow the spec by default. However, in a virtual environment there's no reason for the VMM to vary the hardware signature *unless* it wants to trigger a clean reboot as defined by the ACPI spec. So enable the check by default if a hypervisor is detected. Signed-off-by: David Woodhouse Signed-off-by: Rafael J. Wysocki

ACPI: PM: Print additional debug message in acpi_s2idle_wake()

2022-02-14T18:41:11Z

Make acpi_s2idle_wake() print an additional debug message when the SCI is going to be rearmed for system wakeup to help diagnose wakeup-related issues. Signed-off-by: Rafael J. Wysocki

PM: s2idle: ACPI: Fix wakeup interrupts handling

2022-02-07T20:02:31Z

After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE") wakeup interrupts occurring immediately after the one discarded by acpi_s2idle_wake() may be missed. Moreover, if the SCI triggers again immediately after the rearming in acpi_s2idle_wake(), that wakeup may be missed too. The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup() when pm_wakeup_irq is 0, but that's not the case any more after the interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is cleared by the pm_wakeup_clear() call in s2idle_loop(). However, there may be wakeup interrupts occurring in that time frame and if that happens, they will be missed. To address that issue first move the clearing of pm_wakeup_irq to the point at which it is known that the interrupt causing acpi_s2idle_wake() to tun will be discarded, before rearming the SCI for wakeup. Moreover, because that only reduces the size of the time window in which the issue may manifest itself, allow pm_system_irq_wakeup() to register two second wakeup interrupts in a row and, when discarding the first one, replace it with the second one. [Of course, this assumes that only one wakeup interrupt can be discarded in one go, but currently that is the case and I am not aware of any plans to change that.] Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE") Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki

ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

2022-02-07T20:02:31Z

Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") made acpi_ec_dispatch_gpe() check pm_wakeup_pending(), but that is before canceling the SCI wakeup, so pm_wakeup_pending() is always true. This causes the loop in acpi_ec_dispatch_gpe() to always terminate after one iteration which may not be correct. Address this issue by canceling the SCI wakeup earlier, from acpi_ec_dispatch_gpe() itself. Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-01-11T04:34:00Z

Pull power management updates from Rafael Wysocki: "The most signigicant change here is the addition of a new cpufreq 'P-state' driver for AMD processors as a better replacement for the venerable acpi-cpufreq driver. There are also other cpufreq updates (in the core, intel_pstate, ARM drivers), PM core updates (mostly related to adding new macros for declaring PM operations which should make the lives of driver developers somewhat easier), and a bunch of assorted fixes and cleanups. Summary: - Add new P-state driver for AMD processors (Huang Rui). - Fix initialization of min and max frequency QoS requests in the cpufreq core (Rafael Wysocki). - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada). - Make intel_pstate update cpuinfo.max_freq when notified of HWP capabilities changes and drop a redundant function call from that driver (Rafael Wysocki). - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel, Stephen Boyd, Vladimir Zapolskiy). - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan). - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz Luba). - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman). - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman). - Fix two comments in cpuidle code (Jason Wang, Yang Li). - Allow model-specific normal EPB value to be used in the intel_epb sysfs attribute handling code (Srinivas Pandruvada). - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki). - Add safety net to supplier device release in the runtime PM core code (Rafael Wysocki). - Capture device status before disabling runtime PM for it (Rafael Wysocki). - Add new macros for declaring PM operations to allow drivers to avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and update some drivers to use these macros (Paul Cercueil). - Allow ACPI hardware signature to be honoured during restore from hibernation (David Woodhouse). - Update outdated operating performance points (OPP) documentation (Tang Yizhou). - Reduce log severity for informative message regarding frequency transition failures in devfreq (Tzung-Bi Shih). - Add DRAM frequency controller devfreq driver for Allwinner sunXi SoCs (Samuel Holland). - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd Bergmann). - Add support for new layout of Psys PowerLimit Register on SPR to the Intel RAPL power capping driver (Zhang Rui). - Fix typo in a comment in idle_inject.c (Jason Wang). - Remove unused function definition from the DTPM (Dynamit Thermal Power Management) power capping framework (Daniel Lezcano). - Reduce DTPM trace verbosity (Daniel Lezcano)" * tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment cpuidle: use default_groups in kobj_type x86: intel_epb: Allow model specific normal EPB value MAINTAINERS: Add AMD P-State driver maintainer entry Documentation: amd-pstate: Add AMD P-State driver introduction cpufreq: amd-pstate: Add AMD P-State performance attributes cpufreq: amd-pstate: Add AMD P-State frequencies attributes cpufreq: amd-pstate: Add boost mode support for AMD P-State cpufreq: amd-pstate: Add trace for AMD P-State module cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution cpufreq: amd-pstate: Add fast switch function for AMD P-State cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors ACPI: CPPC: Add CPPC enable register function ACPI: CPPC: Check present CPUs for determining _CPC is valid ACPI: CPPC: Implement support for SystemIO registers x86/msr: Add AMD CPPC MSR definitions x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag cpufreq: use default_groups in kobj_type ...