kernel.git/drivers/acpi/scan.c, branch linux-2.6.36.y

ACPI / ACPICA: Do not execute _PRW methods during initialization

2010-07-12T18:17:39Z

Currently, during initialization ACPICA walks the entire ACPI namespace in search of any device objects with assciated _PRW methods. All of the _PRW methods found are executed in the process to extract the GPE information returned by them, so that the GPEs in question can be marked as "able to wakeup" (more precisely, the ACPI_GPE_CAN_WAKE flag is set for them). The only purpose of this exercise is to avoid enabling the CAN_WAKE GPEs automatically, even if there are _Lxx/_Exx methods associated with them. However, it is both costly and unnecessary, because the host OS has to execute the _PRW methods anyway to check which devices can wake up the system from sleep states. Moreover, it then uses full information returned by _PRW, including the GPE information, so it can take care of disabling the GPEs if necessary. Remove the code that walks the namespace and executes _PRW from ACPICA and modify comments to reflect that change. Make acpi_bus_set_run_wake_flags() disable GPEs for wakeup devices so that they don't cause spurious wakeup events to be signaled. This not only reduces the complexity of the ACPICA initialization code, but in some cases it should reduce the kernel boot time as well. Unfortunately, for this purpose we need a new ACPICA function, acpi_gpe_can_wake(), to be called by the host OS in order to disable the GPEs that can wake up the system and were previously enabled by acpi_ev_initialize_gpe_block() or acpi_ev_update_gpes() (such a GPE should be disabled only once, because the initialization code enables it only once, but it may be pointed to by _PRW for multiple devices and that's why the additional function is necessary). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags()

2010-07-12T18:17:19Z

When we check if a GPE can be used for runtime signaling, we only search the FADT GPE blocks, which is incorrect, becuase the GPE may be located elsewhere. We really should be using the GPE device information previously returned by _PRW here, so make that happen. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPICA: Minimize the differences between linux GPE code and ACPICA code base

2010-04-20T14:43:16Z

We have ported Rafael's major GPE changes (ACPI: Use GPE reference counting to support shared GPEs) into ACPICA code base. But the port and Rafael's original patch have some differences, so we made below patch to make linux GPE code consistent with ACPICA code base. Most changes are about comments and coding styles. Other noticeable changes are based on: Rafael: Reduce code duplication related to GPE lookup https://patchwork.kernel.org/patch/86237/ Rafael: Always use the same lock for GPE locking https://patchwork.kernel.org/patch/90471/ A new field gpe_count in struct acpi_gpe_block_info to record the number of individual GPEs in block. Rename acpi_ev_save_method_info to acpi_ev_match_gpe_method. Signed-off-by: Rafael J. Wysocki Signed-off-by: Robert Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown

Merge branches 'battery', 'bugzilla-14667', 'bugzilla-15096', 'bugzilla-15480', 'bugzilla-15521', 'bugzilla-15605', 'gpe-reference-counters', 'misc', 'pxm-fix' and 'video-random-key' into release

2010-04-06T21:06:22Z

ACPI: use _HID when supplied by root-level devices

2010-04-04T03:32:07Z

Previously, we assumed the only Device object immediately below the root was the \_SB Scope (which the ACPI CA treats as a Device), so we forced the HID of all such objects to ACPI_BUS_HID ("LNXSYBUS"). However, there are DSDTs that supply root-level Device objects with _HIDs. This patch makes us pay attention to those _HIDs and only add the synthetic ACPI_BUS_HID for root-level objects that do not supply their own _HID. For example, this DSDT: https://bugzilla.kernel.org/show_bug.cgi?id=15605 contains: Scope (_SB) { ... } Device (AMW0) { Name (_HID, EisaId ("PNP0C14")) ... } and we should use "PNP0C14" for the AMW0 device, not "LNXSYBUS". Signed-off-by: Bjorn Helgaas Acked-by: Zhang Rui Tested-by: Yong Wang Signed-off-by: Len Brown

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

acpi: Support IBM SMBus CMI devices

2010-03-24T13:38:37Z

On some old IBM workstations and desktop computers, the BIOS presents in the DSDT an SMBus object that is missing the HID identifier that the i2c-scmi driver looks for. Modify the ACPI device scan code to insert the missing HID if it finds an IBM system with such an object. Affected machines: IntelliStation Z20/Z30. Note that the i2c-i801 driver no longer works on these machines because of ACPI resource conflicts. Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare

PCI / ACPI / PM: Platform support for PCI PME wake-up

2010-02-23T00:21:02Z

Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett . Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes

ACPI / PM: Add more run-time wake-up fields

2010-02-23T00:20:51Z

Use the run_wake flag to mark all devices for which run-time wake-up events may be generated by the platform. Introduce a new wake-up flag, always_enabled, for marking devices that should be permanently enabled to generate run-time events. Also, introduce a reference counter for run-wake devices and a function that will initialize all of the run-time wake-up fields for given device. Signed-off-by: Rafael J. Wysocki Acked-by: Len Brown Signed-off-by: Jesse Barnes

ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was found

2010-02-01T02:43:32Z

Callers (acpi_memhotplug.c, dock.c and others) check for the return value of acpi_bus_add() and assume a valid device was returned in case zero was returned. Thus return -ENODEV if no device was found in acpi_bus_scan and propagate this through acpi_bus_add and acpi_bus_start. Also remove a confusing comment in acpiphp_glue.c, acpi_bus_scan will and cannot invoke if acpi_bus_add returns no valid device. Signed-off-by: Thomas Renninger Acked-by: Bjorn Helgaas Signed-off-by: Len Brown