kernel.git/drivers/acpi/pmic, branch linux-4.15.y

Merge tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2017-11-16T17:15:57Z

Pull MFD updates from Lee Jones: "New drivers: - Add support for Cherry Trail Dollar Cove TI PMIC - Add support for Add Spreadtrum SC27xx series PMICs New device support: - Add support Regulator to axp20x New functionality: - Add DT support; aspeed-scu sc27xx-pmic - Add power saving support; rts5249 Fix-ups: - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218 - Staticise/constify; stw481x - Use new succinct IRQ API; fsl-imx25-tsadc - Kconfig fix-ups; MFD_TPS65218 - Identify SPI method; lpc_ich - Use managed resources (devm_*) calls; ssbi - Remove unused/obsolete code/documentation; mc13xxx Bug fixes: - Fix typo in MAINTAINERS - Fix error handling; mxs-lradc - Clean-up IRQs on .remove; fsl-imx25-tsadc" * tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits) dt-bindings: mfd: mc13xxx: Remove obsolete property mfd: axp20x: Add axp20x-regulator cell for AXP813 mfd: Add Spreadtrum SC27xx series PMICs driver dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation mfd: ssbi: Use devm_of_platform_populate() mfd: fsl-imx25: Clean up irq settings during removal mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method mfd: tps65218: Introduce dependency on CONFIG_OF mfd: tps65218: Correct the config description MAINTAINERS: Fix Dialog search term for watchdog binding file mfd: fsl-imx25: Set irq handler and data in one go mfd: rts5249: Add support for RTS5250S power saving ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC mfd: Add support for Cherry Trail Dollar Cove TI PMIC syscon: dt-bindings: Add binding document for iProc MHB block syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU mfd: max77693: Add muic of_compatible in mfd_cell mfd: stw481x: Make three arrays static const, reduces object code size mfd: tps65217: Introduce dependency on CONFIG_OF ...

Merge branches 'acpi-pmic', 'acpi-apei' and 'acpi-x86'

2017-11-13T00:37:17Z

* acpi-pmic: ACPI / PMIC: Add TI PMIC TPS68470 operation region driver * acpi-apei: APEI / ERST: use 64-bit timestamps ACPI / APEI: Remove arch_apei_flush_tlb_one() arm64: mm: Remove arch_apei_flush_tlb_one() ACPI / APEI: Remove ghes_ioremap_area ACPI / APEI: Replace ioremap_page_range() with fixmap ACPI / APEI: remove the unused dead-code for SEA/NMI notification type ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() * acpi-x86: ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC

2017-10-13T09:42:58Z

This patch adds the opregion driver for Dollar Cove TI PMIC on Intel Cherry Trail devices. The patch is based on the original work by Intel, found at: https://github.com/01org/ProductionKernelQuilts with many cleanups and rewrites. The driver is currently provided only as built-in to follow other PMIC opregion drivers convention. The re-enumeration of devices at probe is required for fixing the issues on HP x2 210 G2. See bug#195689. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195689 Signed-off-by: Takashi Iwai Reviewed-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones

ACPI / PMIC: Add TI PMIC TPS68470 operation region driver

2017-10-03T11:52:32Z

The Kabylake platform coreboot (Chrome OS equivalent of BIOS) has defined 4 operation regions for the TI TPS68470 PMIC. These operation regions are to enable/disable voltage regulators, configure voltage regulators, enable/disable clocks and to configure clocks. This config adds ACPI operation region support for TI TPS68470 PMIC. TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates clocks for image sensors, drives a dual LED for flash and incorporates two LED drivers for general purpose indicators. This driver enables ACPI operation region support to control voltage regulators and clocks for the TPS68470 PMIC. Signed-off-by: Rajmohan Mani Acked-by: Sakari Ailus Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC

2017-07-24T20:43:17Z

Testing has shown that the TS-pin's bias-current needs to be disabled when reading the GPIO0 pin in GPADC mode. It seems that there is only 1 bias current source and to be able to use it for the GPIO0 pin in GPADC mode it must be temporarily turned off for the TS pin, but the datasheet does not mention this. This commit adds the necessary writes to turn the TS pin BIAS current off before and back on after reading the GPADC. This fixes the GPADC always returning a reading of 0. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: xpower: Add support for the GPI1 regulator to the OpRegion handler

2017-06-22T00:15:05Z

Some Bay Trail devices use a GPI1 regulator field (address 0x4c) in their 0x8d power OpRegion, add support for this. This fixes AE_BAD_PARAMETER errors getting thrown on these devices and fixes these errors causing these devices to not suspend. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: xpower: Fix power_table addresses

2017-04-28T21:32:44Z

The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot). Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel. While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Stop xpower OPRegion handler relying on IIO

2017-04-20T10:43:43Z

The intel_pmic_xpower code provides an OPRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if both the mfd and opregion drivers are built in, which is why the Kconfig option for intel_pmic_xpower is a bool. The use of IIO is causing trouble for generic distro configs here as distros will typically want to build IIO drivers as modules and there really is no reason to use IIO here. The reading of the ADC value is a single regmap_bulk_read, which is already protected against races by the regmap-lock. This commit removes the use of IIO, allowing distros to enable the driver without needing to built IIO in and also actually simplifies the code. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC

2017-04-20T10:43:41Z

Add opregion driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches. This does not include support for the Thermal opregion (DPTF) due to lacking documentation. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki