kernel.git/drivers/acpi/bus.c, branch linux-3.12.y

ACPI: Fix conflict between customized DSDT and DSDT local copy

2014-07-02T10:06:25Z

commit 73577d1df8e1f31f6b1a5eebcdbc334eb0330e47 upstream. This patch fixes the following issue: If DSDT is customized, no local DSDT copy is needed. References: https://bugzilla.kernel.org/show_bug.cgi?id=69711 Signed-off-by: Enrico Etxe Arte Signed-off-by: Lv Zheng [rjw: Subject] Signed-off-by: Rafael J. Wysocki Signed-off-by: Jiri Slaby

ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API

2014-02-13T21:50:13Z

commit 49a12877d2777cadcb838981c3c4f5a424aef310 upstream. There is currently no facility in ACPI to express the hookup of voltage regulators, the expectation is that the regulators that exist in the system will be handled transparently by firmware if they need software control at all. This means that if for some reason the regulator API is enabled on such a system it should assume that any supplies that devices need are provided by the system at all relevant times without any software intervention. Tell the regulator core to make this assumption by calling regulator_has_full_constraints(). Do this as soon as we know we are using ACPI so that the information is available to the regulator core as early as possible. This will cause the regulator core to pretend that there is an always on regulator supplying any supply that is requested but that has not otherwise been mapped which is the behaviour expected on a system with ACPI. Should the ability to specify regulators be added in future revisions of ACPI then once we have support for ACPI mappings in the kernel the same assumptions will apply. It is also likely that systems will default to a mode of operation which does not require any interpretation of these mappings in order to be compatible with existing operating system releases so it should remain safe to make these assumptions even if the mappings exist but are not supported by the kernel. Signed-off-by: Mark Brown Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug

2014-01-09T20:25:16Z

commit f244d8b623dae7a7bc695b0336f67729b95a9736 upstream. The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891 Reported-and-tested-by: Mike Lothian Reported-and-tested-by: Reported-and-tested-by: Joaquín Aramendía Cc: Alex Deucher Cc: Dave Airlie Cc: Takashi Iwai Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Merge branch 'acpi-assorted'

2013-08-26T23:29:04Z

* acpi-assorted: ACPI / osl: Kill macro INVALID_TABLE(). earlycpio.c: Fix the confusing comment of find_cpio_data(). ACPI / x86: Print Hot-Pluggable Field in SRAT. ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c ACPI / thermal: Remove the unused lock of struct acpi_thermal ACPI / osl: Fix osi_setup_entries[] __initdata attribute location ACPI / numa: Fix __init attribute location in slit_valid() ACPI / dock: Fix __init attribute location in find_dock_and_bay() ACPI / Sleep: Fix incorrect placement of __initdata ACPI / processor: Fix incorrect placement of __initdata ACPI / EC: Fix incorrect placement of __initdata ACPI / scan: Drop unnecessary label from acpi_create_platform_device() ACPI: Move acpi_bus_get_device() from bus.c to scan.c ACPI / scan: Allow platform device creation without any IO resources ACPI: Cleanup sparse warning on acpi_os_initialize1() platform / thinkpad: Remove deprecated hotkey_report_mode parameter ACPI: Remove the old /proc/acpi/event interface

ACPI: Move acpi_bus_get_device() from bus.c to scan.c

2013-08-06T12:12:22Z

Move acpi_bus_get_device() from bus.c to scan.c which allows acpi_bus_data_handler() to become static and clean up the latter. Signed-off-by: Rafael J. Wysocki

ACPI: Cleanup sparse warning on acpi_os_initialize1()

2013-07-25T22:36:00Z

This patch cleans up the following sparse warning: # make C=2 drivers/acpi/osl.o ... drivers/acpi/osl.c:1775:20: warning: symbol 'acpi_os_initialize1' was not declared. Should it be static? ... CC drivers/acpi/osl.o Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPI: Remove the old /proc/acpi/event interface

2013-07-15T11:56:36Z

It is quite some time that this one has been deprecated. Get rid of it. Should some really important user be overseen, it may be reverted and the userspace program worked on first, but it is time to do something to get rid of this old stuff... Signed-off-by: Thomas Renninger Acked-by: Matthew Garrett Acked-by: Henrique de Moraes Holschuh Signed-off-by: Rafael J. Wysocki

ACPI: Drop ACPI bus notifier call chain

2013-07-14T23:33:11Z

There are no users of the ACPI bus notifier call chain, acpi_bus_notify_list, any more, so drop it. Signed-off-by: Rafael J. Wysocki

ACPI: introduce helper function acpi_execute_simple_method()

2013-07-14T23:33:10Z

Introduce helper function acpi_execute_simple_method() and use it in a number of places to simplify code. [rjw: Changelog] Signed-off-by: Jiang Liu Signed-off-by: Rafael J. Wysocki

ACPI: Remove useless initializers

2013-06-19T21:34:58Z

These local variables are all initialized at their first use, so there's no point in initializing them earlier. Signed-off-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki