kernel.git/drivers/acpi/bus.c, branch linux-3.1.y

ACPI: APEI build fix

2011-08-03T15:15:59Z

as GHES is optional... When # CONFIG_ACPI_APEI_GHES is not set: (.init.text+0x4c22): undefined reference to `ghes_disable' Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Len Brown

ACPI, APEI, Add APEI bit support in generic _OSC call

2011-07-14T03:38:20Z

In APEI firmware first mode, hardware error is reported by hardware to firmware firstly, then firmware reports the error to Linux in a GHES error record via POLL/SCI/IRQ/NMI etc. This may result in some issues if OS has no full APEI support. So some firmware implementation will work in a back-compatible mode by default. Where firmware will only notify OS in old-fashion, without GHES record. For example, for a fatal hardware error, only NMI is signaled, no GHES record. To gain full APEI power on these machines, APEI bit in generic _OSC call can be specified to tell firmware that Linux has full APEI support. This patch adds the APEI bit support in generic _OSC call. Signed-off-by: Huang Ying Reviewed-by: Andi Kleen Reviewed-by: Matthew Garrett Signed-off-by: Len Brown

ACPI: Add D3 cold state

2011-05-29T06:21:08Z

_SxW returns an Integer containing the lowest D-state supported in state Sx. If OSPM has not indicated that it supports _PR3, then the value “3” corresponds to D3. If it has indicated _PR3 support, the value “3” represents D3hot and the value “4” represents D3cold. Linux does set _OSC._PR3, so we should fix it to expect that _SxW can return 4. Signed-off-by: Lin Ming Acked-by: Jesse Barnes Signed-off-by: Len Brown

PM: Drop pm_flags that is not necessary

2011-03-14T23:43:16Z

The variable pm_flags is used to prevent APM from being enabled along with ACPI, which would lead to problems. However, acpi_init() is always called before apm_init() and after acpi_init() has returned, it is known whether or not ACPI will be used. Namely, if acpi_disabled is not set after acpi_init() has returned, this means that ACPI is enabled. Thus, it is sufficient to check acpi_disabled in apm_init() to prevent APM from being enabled in parallel with ACPI. Signed-off-by: Rafael J. Wysocki Acked-by: Len Brown

PM / ACPI: Remove references to pm_flags from bus.c

2011-03-14T23:43:15Z

If direct references to pm_flags are removed from drivers/acpi/bus.c, CONFIG_ACPI will not need to depend on CONFIG_PM any more. Make that happen. Signed-off-by: Rafael J. Wysocki Acked-by: Len Brown

ACPI / PM: Drop acpi_power_nocheck

2011-01-12T09:48:45Z

Since acpi_bus_set_power() should not use __acpi_bus_get_power() to update the device's device->power.state field before changing its power state (this may cause device->power.state to be inconsistent with the device power resources' reference counters), remove this call from it. In consequence, the acpi_power_nocheck variable is not necessary any more, so it can be dropped along with the DMI table used for setting that variable for HP Pavilion 05. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPI / PM: Drop acpi_bus_get_power()

2011-01-12T09:48:45Z

There are no more users of acpi_bus_get_power(), so it can be dropped. Moreover, it should be dropped, because it modifies the device->power.state field of an ACPI device without updating the reference counters of the device's power resources, which is wrong. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPI / Fan: Rework the handling of power resources

2011-01-12T09:48:45Z

Use the new function acpi_bus_update_power() for manipulating power resources used by ACPI fan devices, which allows them to be put into the right state during initialization and resume. Consequently, remove the flags.force_power_state field from struct acpi_device, which is not necessary any more. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPI / PM: Register acpi_power_driver early

2011-01-12T09:48:45Z

The ACPI device driver used for handling power resources, acpi_power_driver, creates a struct acpi_power_resource object for each ACPI device representing a power resource. These objects are then used when setting and reading the power states of devices using the corresponding power resources. Unfortunately, acpi_power_driver is registered after acpi_scan_init() that may add devices using the power resources before acpi_power_driver has a chance to create struct acpi_power_resource objects for them (specifically, the power resources may be referred to during the scanning process through acpi_bus_get_power() before they have been initialized). As the first step towards fixing this issue, move the registration of acpi_power_driver into acpi_scan_init() so that power resource devices can be initialized by it as soon as they have been found in the namespace. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPI / PM: Add function for updating device power state consistently

2011-01-12T09:48:45Z

Add function acpi_bus_update_power() for reading the actual power state of an ACPI device and updating its device->power.state field in such a way that its power resources' reference counters will remain consistent with that field. For this purpose introduce __acpi_bus_set_power() setting the power state of an ACPI device without updating its device->power.state field and make acpi_bus_set_power() and acpi_bus_update_power() use it (acpi_bus_set_power() retains the current behavior for now). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown