kernel.git/drivers/acpi/apei, branch linux-4.4.y

x86/mm: split vmalloc_sync_all()

2020-04-02T17:02:31Z

commit 763802b53a427ed3cbd419dbba255c414fdd9e7c upstream. Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot Reported-by: Shile Zhang Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Tested-by: Borislav Petkov Acked-by: Rafael J. Wysocki [GHES] Cc: Dave Hansen Cc: Andy Lutomirski Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Switch estatus pool to use vmalloc memory

2019-12-05T14:27:09Z

[ Upstream commit 0ac234be1a9497498e57d958f4251f5257b116b4 ] The ghes code is careful to parse and round firmware's advertised memory requirements for CPER records, up to a maximum of 64K. However when ghes_estatus_pool_expand() does its work, it splits the requested size into PAGE_SIZE granules. This means if firmware generates 5K of CPER records, and correctly describes this in the table, __process_error() will silently fail as it is unable to allocate more than PAGE_SIZE. Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory may fault and be fixed up by vmalloc_fault(). To prevent this call vmalloc_sync_all() before an NMI handler could discover the memory. Signed-off-by: James Morse Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: APEI / ERST: Fix missing error handling in erst_reader()

2018-01-02T19:33:19Z

commit bb82e0b4a7e96494f0c1004ce50cec3d7b5fb3d1 upstream. The commit f6f828513290 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f828513290 (pstore: pass allocated memory region back to caller) Tested-by: Jerry Tang Signed-off-by: Takashi Iwai Acked-by: Kees Cook Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal

2017-08-30T08:19:29Z

commit 7d64f82cceb21e6d95db312d284f5f195e120154 upstream. When removing a GHES device notified by SCI, list_del_rcu() is used, ghes_remove() should call synchronize_rcu() before it goes on to call kfree(ghes), otherwise concurrent RCU readers may still hold this list entry after it has been freed. Signed-off-by: James Morse Reviewed-by: "Huang, Ying" Fixes: 81e88fdc432a (ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Fix NMI notification handling

2017-01-19T19:17:22Z

commit a545715d2dae8d071c5b06af947b07ffa846b288 upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d4850 (GHES: Elliminate double-loop in the NMI handler) Signed-off-by: Prarit Bhargava Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Fix incorrect return value of ghes_proc()

2016-11-18T09:48:37Z

commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream. Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by: Punit Agrawal Tested-by: Tyler Baicar Reviewed-by: Borislav Petkov [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Merge branch 'x86/urgent' into core/efi, to pick up a pending EFI fix

2015-10-14T14:05:18Z

Signed-off-by: Ingo Molnar

acpi/apei: Use appropriate pgprot_t to map GHES memory

2015-09-14T09:40:04Z

If the ACPI APEI firmware handles hardware error first (called "firmware first handling"), the firmware updates the GHES memory region with hardware error record (called "generic hardware error record"). Essentially the firmware writes hardware error records in the GHES memory region, triggers an NMI/interrupt, then the GHES driver goes off and grabs the error record from the GHES region. The kernel currently maps the GHES memory region as cacheable (PAGE_KERNEL) for all architectures. However, on some arm64 platforms, there is a mismatch between how the kernel maps the GHES region (PAGE_KERNEL) and how the firmware maps it (EFI_MEMORY_UC, ie. uncacheable), leading to the possibility of the kernel GHES driver reading stale data from the cache when it receives the interrupt. With stale data being read, the kernel is unaware there is new hardware error to be handled when there actually is; this may lead to further damage in various scenarios, such as error propagation caused data corruption. If uncorrected error (such as double bit ECC error) happened in memory operation and if the kernel is unaware of such an event happening, errorneous data may be propagated to the disk. Instead GHES memory region should be mapped with page protection type according to what is returned from arch_apei_get_mem_attribute(). Signed-off-by: Jonathan (Zhixiong) Zhang Signed-off-by: Matt Fleming [ Small stylistic tweaks. ] Reviewed-by: Matt Fleming Acked-by: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1441372302-23242-3-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar

ACPI: Remove FSF mailing addresses

2015-07-08T00:27:32Z

There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula Signed-off-by: Rafael J. Wysocki

Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2015-06-23T21:18:07Z

Pull power management and ACPI updates from Rafael Wysocki: "The rework of backlight interface selection API from Hans de Goede stands out from the number of commits and the number of affected places perspective. The cpufreq core fixes from Viresh Kumar are quite significant too as far as the number of commits goes and because they should reduce CPU online/offline overhead quite a bit in the majority of cases. From the new featues point of view, the ACPICA update (to upstream revision 20150515) adding support for new ACPI 6 material to ACPICA is the one that matters the most as some new significant features will be based on it going forward. Also included is an update of the ACPI device power management core to follow ACPI 6 (which in turn reflects the Windows' device PM implementation), a PM core extension to support wakeup interrupts in a more generic way and support for the ACPI _CCA device configuration object. The rest is mostly fixes and cleanups all over and some documentation updates, including new DT bindings for Operating Performance Points. There is one fix for a regression introduced in the 4.1 cycle, but it adds quite a number of lines of code, it wasn't really ready before Thursday and you were on vacation, so I refrained from pushing it on the last minute for 4.1. Specifics: - ACPICA update to upstream revision 20150515 including basic support for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM, FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore, Lv Zheng). - ACPI device power management core code update to follow ACPI 6 which reflects the ACPI device power management implementation in Windows (Rafael J Wysocki). - rework of the backlight interface selection logic to reduce the number of kernel command line options and improve the handling of DMI quirks that may be involved in that and to make the code generally more straightforward (Hans de Goede). - fixes for the ACPI Embedded Controller (EC) driver related to the handling of EC transactions (Lv Zheng). - fix for a regression related to the ACPI resources management and resulting from a recent change of ACPI initialization code ordering (Rafael J Wysocki). - fix for a system initialization regression related to ACPI introduced during the 3.14 cycle and caused by running the code that switches the platform over to the ACPI mode too early in the initialization sequence (Rafael J Wysocki). - support for the ACPI _CCA device configuration object related to DMA cache coherence (Suravee Suthikulpanit). - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov). - ACPI battery driver cleanups (Luis Henriques, Mathias Krause). - ACPI processor driver cleanups (Hanjun Guo). - cleanups and documentation update related to the ACPI device properties interface based on _DSD (Rafael J Wysocki). - ACPI device power management fixes (Rafael J Wysocki). - assorted cleanups related to ACPI (Dominik Brodowski, Fabian Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki). - fix for a long-standing issue causing General Protection Faults to be generated occasionally on return to user space after resume from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar). - fix to make the suspend core code return -EBUSY consistently in all cases when system suspend is aborted due to wakeup detection (Ruchi Kandoi). - support for automated device wakeup IRQ handling allowing drivers to make their PM support more starightforward (Tony Lindgren). - new tracepoints for suspend-to-idle tracing and rework of the prepare/complete callbacks tracing in the PM core (Todd E Brandt, Rafael J Wysocki). - wakeup sources framework enhancements (Jin Qian). - new macro for noirq system PM callbacks (Grygorii Strashko). - assorted cleanups related to system suspend (Rafael J Wysocki). - cpuidle core cleanups to make the code more efficient (Rafael J Wysocki). - powernv/pseries cpuidle driver update (Shilpasri G Bhat). - cpufreq core fixes related to CPU online/offline that should reduce the overhead of these operations quite a bit, unless the CPU in question is physically going away (Viresh Kumar, Saravana Kannan). - serialization of cpufreq governor callbacks to avoid race conditions in some cases (Viresh Kumar). - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit Bhargava, Joe Konno). - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep Holla, Felipe Balbi, Tang Yuantian). - assorted cleanups in cpufreq drivers and core (Shailendra Verma, Fabian Frederick, Wang Long). - new Device Tree bindings for representing Operating Performance Points (Viresh Kumar). - updates for the common clock operations support code in the PM core (Rajendra Nayak, Geert Uytterhoeven). - PM domains core code update (Geert Uytterhoeven). - Intel Knights Landing support for the RAPL (Running Average Power Limit) power capping driver (Dasaratharaman Chandramouli). - fixes related to the floor frequency setting on Atom SoCs in the RAPL power capping driver (Ajay Thomas). - runtime PM framework documentation update (Ben Dooks). - cpupower tool fix (Herton R Krzesinski)" * tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits) cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state x86: Load __USER_DS into DS/ES after resume PM / OPP: Add binding for 'opp-suspend' PM / OPP: Allow multiple OPP tables to be passed via DT PM / OPP: Add new bindings to address shortcomings of existing bindings ACPI: Constify ACPI device IDs in documentation ACPI / enumeration: Document the rules regarding the PRP0001 device ID ACPI / video: Make acpi_video_unregister_backlight() private acpi-video-detect: Remove old API toshiba-acpi: Port to new backlight interface selection API thinkpad-acpi: Port to new backlight interface selection API sony-laptop: Port to new backlight interface selection API samsung-laptop: Port to new backlight interface selection API msi-wmi: Port to new backlight interface selection API msi-laptop: Port to new backlight interface selection API intel-oaktrail: Port to new backlight interface selection API ideapad-laptop: Port to new backlight interface selection API fujitsu-laptop: Port to new backlight interface selection API eeepc-laptop: Port to new backlight interface selection API dell-wmi: Port to new backlight interface selection API ...