kernel.git/drivers/accel, branch master

accel/amdxdna: Fix runtime suspend deadlock when there is pending job

2026-03-10T18:46:40Z

The runtime suspend callback drains the running job workqueue before suspending the device. If a job is still executing and calls pm_runtime_resume_and_get(), it can deadlock with the runtime suspend path. Fix this by moving pm_runtime_resume_and_get() from the job execution routine to the job submission routine, ensuring the device is resumed before the job is queued and avoiding the deadlock during runtime suspend. Fixes: 063db451832b ("accel/amdxdna: Enhance runtime power management") Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260310180058.336348-1-lizhi.hou@amd.com

accel/ivpu: Remove boot params address setting via MMIO register

2026-03-10T12:34:31Z

The NPU 60XX uses the default boot params location specified in the firmware image header, consistent with earlier generations. Remove the unnecessary MMIO register write, freeing the AON register for future use. Fixes: 44e4c88951fa ("accel/ivpu: Implement warm boot flow for NPU6 and unify boot handling") Signed-off-by: Andrzej Kacprowski Reviewed-by: Karol Wachowski Signed-off-by: Karol Wachowski Link: https://patch.msgid.link/20260305142226.194995-1-andrzej.kacprowski@linux.intel.com (cherry picked from commit 81e62e7bf8b9309bf0febdf00940818f98bc23d8) Signed-off-by: Thomas Zimmermann

accel: ethosu: Handle possible underflow in IFM size calculations

2026-03-05T21:21:17Z

If the command stream has larger padding sizes than the IFM and OFM diminsions, then the calculations will underflow to a negative value. The result is a very large region bounds which is caught on submit, but it's better to catch it earlier. Current mesa ethosu driver has a signedness bug which resulted in padding of 127 (the max) and triggers this issue. Reviewed-and-Tested-by: Anders Roxell Link: https://patch.msgid.link/20260218-ethos-fixes-v1-3-be3fa3ea9a30@kernel.org Signed-off-by: Rob Herring (Arm)

accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar

2026-03-05T21:21:17Z

The NPU_OP_ELEMENTWISE instruction uses a scalar value for IFM2 if the IFM2_BROADCAST "scalar" mode is set. It is a bit (7) on the u65 and part of a field (bits 3:0) on the u85. The driver was hardcoded to the u85. Fixes: 5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver") Reviewed-and-Tested-by: Anders Roxell Link: https://patch.msgid.link/20260218-ethos-fixes-v1-2-be3fa3ea9a30@kernel.org Signed-off-by: Rob Herring (Arm)

accel: ethosu: Fix job submit error clean-up refcount underflows

2026-03-05T21:21:17Z

If the job submit fails before adding the job to the scheduler queue such as when the GEM buffer bounds checks fail, then doing a ethosu_job_put() results in a pm_runtime_put_autosuspend() without the corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are also unnecessary, but seem to be harmless. Split the ethosu_job_cleanup() function into 2 parts for the before and after the job is queued. Fixes: 5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver") Reviewed-and-Tested-by: Anders Roxell Link: https://patch.msgid.link/20260218-ethos-fixes-v1-1-be3fa3ea9a30@kernel.org Signed-off-by: Rob Herring (Arm)

accel/amdxdna: Split mailbox channel create function

2026-03-05T17:24:33Z

The management channel used for firmware control command submission is currently created after the firmware is started. If channel creation fails (for example, due to memory allocation failure or workqueue creation interruption), the firmware remains in a pending state and is unable to receive any control commands. To avoid leaving the firmware in this inconsistent state, split xdna_mailbox_create_channel() into two separate functions so that resource allocation can be completed before interacting with the hardware. xdna_mailbox_alloc_channel() Allocates memory and initializes the workqueue. This can be called earlier, before interacting with the hardware. xdna_mailbox_start_channel() Performs the hardware interaction required to start the channel. Rename xdna_mailbox_destroy_channel() to xdna_mailbox_free_channel(). Ensure that xdna_mailbox_stop_channel() and xdna_mailbox_free_channel() properly unwind the corresponding start and allocation steps, respectively. Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox") Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260305062041.3954024-1-lizhi.hou@amd.com

accel/amdxdna: Fix major version check on NPU1 platform

2026-03-04T20:05:02Z

Add the missing major number in npu1_fw_feature_table. Without the major version specified, the firmware feature check fails, preventing new firmware commands from being enabled on the NPU1 platform. With the correct major version populated, the driver properly detects firmware support and enables the new command. Fixes: f1eac46fe5f7 ("accel/amdxdna: Update firmware version check for latest firmware") Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260304195012.3616908-1-lizhi.hou@amd.com

accel/amdxdna: Fix NULL pointer dereference of mgmt_chann

2026-03-02T17:43:22Z

mgmt_chann may be set to NULL if the firmware returns an unexpected error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL pointer dereference in aie2_hw_stop(). Fix this by introducing a dedicated helper to destroy mgmt_chann and by adding proper NULL checks before accessing it. Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox") Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260226213857.3068474-1-lizhi.hou@amd.com

accel/amdxdna: Fill invalid payload for failed command

2026-02-28T07:01:36Z

Newer userspace applications may read the payload of a failed command to obtain detailed error information. However, the driver and old firmware versions may not support returning advanced error information. In this case, initialize the command payload with an invalid value so userspace can detect that no detailed error information is available. Fixes: aac243092b70 ("accel/amdxdna: Add command execution") Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260227004841.3080241-1-lizhi.hou@amd.com

accel/amdxdna: Use a different name for latest firmware

2026-02-25T21:51:31Z

Using legacy driver with latest firmware causes a power off issue. Fix this by assigning a different filename (npu_7.sbin) to the latest firmware. The driver attempts to load the latest firmware first and falls back to the previous firmware version if loading fails. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5009 Fixes: f1eac46fe5f7 ("accel/amdxdna: Update firmware version check for latest firmware") Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260225204752.2711734-1-lizhi.hou@amd.com