kernel.git/block/bsg.c, branch linux-4.18.y

bsg: fix bogus EINVAL on non-data commands

2018-07-11T14:48:28Z

Fix a regression introduced in Linux kernel 4.17 where sending a SCSI command that does not transfer data (such as TEST UNIT READY) via /dev/bsg/* results in EINVAL. Fixes: 17cb960f29c2 ("bsg: split handling of SCSI CDBs vs transport requeues") Cc: # 4.17+ Reviewed-by: Christoph Hellwig Signed-off-by: Tony Battersby Signed-off-by: Jens Axboe

bsg: fix race of bsg_open and bsg_unregister

2018-06-15T14:15:37Z

The existing implementation allows races between bsg_unregister and bsg_open paths. bsg_unregister and request_queue cleanup and deletion may start and complete right after bsg_get_device (in bsg_open path) retrieves bsg_class_device and releases the mutex. Then bsg_open path touches freed memory of bsg_class_device and request_queue. One possible fix is to hold the mutex all the way through bsg_get_device instead of releasing it after bsg_class_device retrieval. Reviewed-by: Christoph Hellwig Signed-Off-By: Anatoliy Glagolev Signed-off-by: Jens Axboe

block: remove parent device reference from struct bsg_class_device

2018-05-29T19:00:25Z

Bsg holding a reference to the parent device may result in a crash if a bsg file handle is closed after the parent device driver has unloaded. Holding a reference is not really needed: the parent device must exist between bsg_register_queue and bsg_unregister_queue. Before the device goes away the caller does blk_cleanup_queue so that all in-flight requests to the device are gone and all new requests cannot pass beyond the queue. The queue itself is a refcounted object and it will stay alive with a bsg file. Based on analysis, previous patch and changelog from Anatoliy Glagolev. Reported-by: Anatoliy Glagolev Reviewed-by: James E.J. Bottomley Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

block: sanitize blk_get_request calling conventions

2018-05-14T14:55:12Z

Switch everyone to blk_get_request_flags, and then rename blk_get_request_flags to blk_get_request. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe

bsg: split handling of SCSI CDBs vs transport requeues

2018-03-13T17:40:24Z

The current BSG design tries to shoe-horn the transport-specific passthrough commands into the overall framework for SCSI passthrough requests. This has a couple problems: - each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag despite not dealing with SCSI commands at all. Because of that these queues could also incorrectly accept SCSI commands from in-kernel users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl. - the real SCSI bsg queues also incorrectly accept bsg requests of the BSG_SUB_PROTOCOL_SCSI_TRANSPORT type - the bsg transport code is almost unredable because it tries to reuse different SCSI concepts for its own purpose. This patch instead adds a new bsg_ops structure to handle the two cases differently, and thus solves all of the above problems. Another side effect is that the bsg-lib queues also don't need to embedd a struct scsi_request anymore. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-01-31T01:58:07Z

Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...

bsg: use pr_debug instead of hand crafted macros

2018-01-24T16:50:06Z

Use pr_debug instead of hand crafted macros. This way it is not needed to re-compile the kernel to enable bsg debug outputs and it's possible to selectively enable specific prints. Cc: Joe Perches Reviewed-by: Bart Van Assche Signed-off-by: Johannes Thumshirn Signed-off-by: Jens Axboe

block: annotate ->poll() instances

2017-11-27T21:20:00Z

Signed-off-by: Al Viro

block: pass full fmode_t to blk_verify_command

2017-11-11T02:53:25Z

Use the obvious calling convention. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe