kernel.git/arch/x86/realmode, branch linux-5.13.y

x86/setup: Always reserve the first 1M of RAM

2021-06-03T17:57:55Z

There are BIOSes that are known to corrupt the memory under 1M, or more precisely under 640K because the memory above 640K is anyway reserved for the EGA/VGA frame buffer and BIOS. To prevent usage of the memory that will be potentially clobbered by the kernel, the beginning of the memory is always reserved. The exact size of the reserved area is determined by CONFIG_X86_RESERVE_LOW build time and the "reservelow=" command line option. The reserved range may be from 4K to 640K with the default of 64K. There are also configurations that reserve the entire 1M range, like machines with SandyBridge graphic devices or systems that enable crash kernel. In addition to the potentially clobbered memory, EBDA of unknown size may be as low as 128K and the memory above that EBDA start is also reserved early. It would have been possible to reserve the entire range under 1M unless for the real mode trampoline that must reside in that area. To accommodate placement of the real mode trampoline and keep the memory safe from being clobbered by BIOS, reserve the first 64K of RAM before memory allocations are possible and then, after the real mode trampoline is allocated, reserve the entire range from 0 to 1M. Update trim_snb_memory() and reserve_real_mode() to avoid redundant reservations of the same memory range. Also make sure the memory under 1M is not getting freed by efi_free_boot_services(). [ bp: Massage commit message and comments. ] Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations") Signed-off-by: Mike Rapoport Signed-off-by: Borislav Petkov Tested-by: Hugh Dickins Link: https://bugzilla.kernel.org/show_bug.cgi?id=213177 Link: https://lkml.kernel.org/r/20210601075354.5149-2-rppt@kernel.org

x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG

2021-05-10T05:51:38Z

The SYSCFG MSR continued being updated beyond the K8 family; drop the K8 name from it. Suggested-by: Borislav Petkov Signed-off-by: Brijesh Singh Signed-off-by: Borislav Petkov Acked-by: Joerg Roedel Link: https://lkml.kernel.org/r/20210427111636.1207-4-brijesh.singh@amd.com

x86/sev-es: Rename sev-es.{ch} to sev.{ch}

2021-05-10T05:40:27Z

SEV-SNP builds upon the SEV-ES functionality while adding new hardware protection. Version 2 of the GHCB specification adds new NAE events that are SEV-SNP specific. Rename the sev-es.{ch} to sev.{ch} so that all SEV* functionality can be consolidated in one place. Signed-off-by: Brijesh Singh Signed-off-by: Borislav Petkov Acked-by: Joerg Roedel Link: https://lkml.kernel.org/r/20210427111636.1207-2-brijesh.singh@amd.com

x86: Fix various typos in comments, take #2

2021-03-21T22:50:28Z

Fix another ~42 single-word typos in arch/x86/ code comments, missed a few in the first pass, in particular in .S files. Signed-off-by: Ingo Molnar Cc: Borislav Petkov Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Paolo Bonzini Cc: Bjorn Helgaas Cc: linux-kernel@vger.kernel.org

x86/head/64: Don't call verify_cpu() on starting APs

2020-09-09T09:33:20Z

The APs are not ready to handle exceptions when verify_cpu() is called in secondary_startup_64(). Signed-off-by: Joerg Roedel Signed-off-by: Borislav Petkov Reviewed-by: Kees Cook Link: https://lkml.kernel.org/r/20200907131613.12703-69-joro@8bytes.org

x86/realmode: Setup AP jump table

2020-09-09T09:33:20Z

As part of the GHCB specification, the booting of APs under SEV-ES requires an AP jump table when transitioning from one layer of code to another (e.g. when going from UEFI to the OS). As a result, each layer that parks an AP must provide the physical address of an AP jump table to the next layer via the hypervisor. Upon booting of the kernel, read the AP jump table address from the hypervisor. Under SEV-ES, APs are started using the INIT-SIPI-SIPI sequence. Before issuing the first SIPI request for an AP, the start CS and IP is programmed into the AP jump table. Upon issuing the SIPI request, the AP will awaken and jump to that start CS:IP address. Signed-off-by: Tom Lendacky [ jroedel@suse.de: - Adapted to different code base - Moved AP table setup from SIPI sending path to real-mode setup code - Fix sparse warnings ] Co-developed-by: Joerg Roedel Signed-off-by: Joerg Roedel Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200907131613.12703-67-joro@8bytes.org

x86/realmode: Add SEV-ES specific trampoline entry point

2020-09-09T09:33:20Z

The code at the trampoline entry point is executed in real-mode. In real-mode, #VC exceptions can't be handled so anything that might cause such an exception must be avoided. In the standard trampoline entry code this is the WBINVD instruction and the call to verify_cpu(), which are both not needed anyway when running as an SEV-ES guest. Signed-off-by: Joerg Roedel Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200907131613.12703-66-joro@8bytes.org

Rebase locking/kcsan to locking/urgent

2020-06-11T18:02:46Z

Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13Z

The replacement of with made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s

" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include " % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13Z

The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds