kernel.git/arch/x86/power, branch linux-5.13.y

Merge tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-04-28T00:45:09Z

Pull x86 updates from Borislav Petkov: - Turn the stack canary into a normal __percpu variable on 32-bit which gets rid of the LAZY_GS stuff and a lot of code. - Add an insn_decode() API which all users of the instruction decoder should preferrably use. Its goal is to keep the details of the instruction decoder away from its users and simplify and streamline how one decodes insns in the kernel. Convert its users to it. - kprobes improvements and fixes - Set the maximum DIE per package variable on Hygon - Rip out the dynamic NOP selection and simplify all the machinery around selecting NOPs. Use the simplified NOPs in objtool now too. - Add Xeon Sapphire Rapids to list of CPUs that support PPIN - Simplify the retpolines by folding the entire thing into an alternative now that objtool can handle alternatives with stack ops. Then, have objtool rewrite the call to the retpoline with the alternative which then will get patched at boot time. - Document Intel uarch per models in intel-family.h - Make Sub-NUMA Clustering topology the default and Cluster-on-Die the exception on Intel. * tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) x86, sched: Treat Intel SNC topology as default, COD as exception x86/cpu: Comment Skylake server stepping too x86/cpu: Resort and comment Intel models objtool/x86: Rewrite retpoline thunk calls objtool: Skip magical retpoline .altinstr_replacement objtool: Cache instruction relocs objtool: Keep track of retpoline call sites objtool: Add elf_create_undef_symbol() objtool: Extract elf_symbol_add() objtool: Extract elf_strtab_concat() objtool: Create reloc sections implicitly objtool: Add elf_create_reloc() helper objtool: Rework the elf_rebuild_reloc_section() logic objtool: Fix static_call list generation objtool: Handle per arch retpoline naming objtool: Correctly handle retpoline thunk calls x86/retpoline: Simplify retpolines x86/alternatives: Optimize optimize_nops() x86: Add insn_decode_kernel() x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration ...

Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2021-04-26T22:10:25Z

Pull power management updates from Rafael Wysocki: "These add some new hardware support (for example, IceLake-D idle states in intel_idle), fix some issues (for example, the handling of negative "sleep length" values in cpuidle governors), add new functionality to the existing drivers (for example, scale-invariance support in the ACPI CPPC cpufreq driver) and clean up code all over. Specifics: - Add idle states table for IceLake-D to the intel_idle driver and update IceLake-X C6 data in it (Artem Bityutskiy). - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and drop the unused do_idle() firmware call from it (Dmitry Osipenko). - Fix cpuidle-qcom-spm Kconfig entry (He Ying). - Fix handling of possible negative tick_nohz_get_next_hrtimer() return values of in cpuidle governors (Rafael Wysocki). - Add support for frequency-invariance to the ACPI CPPC cpufreq driver and update the frequency-invariance engine (FIE) to use it as needed (Viresh Kumar). - Simplify the default delay_us setting in the ACPI CPPC cpufreq driver (Tom Saeger). - Clean up frequency-related computations in the intel_pstate cpufreq driver (Rafael Wysocki). - Fix TBG parent setting for load levels in the armada-37xx cpufreq driver and drop the CPU PM clock .set_parent method for armada-37xx (Marek Behún). - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár). - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in cpufreq-dt to take the -EPROBE_DEFER one into acconut as appropriate (Quanyang Wang). - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich). - Drop the unused for_each_policy() macro from cpufreq (Shaokun Zhang). - Simplify computations in the schedutil cpufreq governor to avoid unnecessary overhead (Yue Hu). - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury). - Fix cpufreq documentation links in Kconfig (Alexander Monakov). - Fix PCI device power state handling in pci_enable_device_flags() to avoid issuse in some cases when the device depends on an ACPI power resource (Rafael Wysocki). - Add missing documentation of pm_runtime_resume_and_get() (Alan Stern). - Add missing static inline stub for pm_runtime_has_no_callbacks() to pm_runtime.h and drop the unused try_to_freeze_nowarn() definition (YueHaibing). - Drop duplicate struct device declaration from pm.h and fix a structure type declaration in intel_rapl.h (Wan Jiabing). - Use dev_set_name() instead of an open-coded equivalent of it in the wakeup sources code and drop a redundant local variable initialization from it (Andy Shevchenko, Colin Ian King). - Use crc32 instead of md5 for e820 memory map integrity check during resume from hibernation on x86 (Chris von Recklinghausen). - Fix typos in comments in the system-wide and hibernation support code (Lu Jialin). - Modify the generic power domains (genpd) code to avoid resuming devices in the "prepare" phase of system-wide suspend and hibernation (Ulf Hansson). - Add Hygon Fam18h RAPL support to the intel_rapl power capping driver (Pu Wen). - Add MAINTAINERS entry for the dynamic thermal power management (DTPM) code (Daniel Lezcano). - Add devm variants of operating performance points (OPP) API functions and switch over some users of the OPP framework to the new resource-managed API (Yangtao Li and Dmitry Osipenko). - Update devfreq core: * Register devfreq devices as cooling devices on demand (Daniel Lezcano). * Add missing unlock opeation in devfreq_add_device() (Lukasz Luba). * Use the next frequency as resume_freq instead of the previous frequency when using the opp-suspend property (Dong Aisheng). * Check get_dev_status in devfreq_update_stats() (Dong Aisheng). * Fix set_freq path for the userspace governor in Kconfig (Dong Aisheng). * Remove invalid description of get_target_freq() (Dong Aisheng). - Update devfreq drivers: * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded of_match_ptr() (Dong Aisheng, Fabio Estevam). * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop references to undefined symbols (Enric Balletbo i Serra, Gaël PORTAY). * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof Kozlowski). * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam). - Fix kernel-doc warnings in three places (Pierre-Louis Bossart). - Fix typo in the pm-graph utility code (Ricardo Ribalda)" * tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) PM: wakeup: remove redundant assignment to variable retval PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check cpufreq: Kconfig: fix documentation links PM: wakeup: use dev_set_name() directly PM: runtime: Add documentation for pm_runtime_resume_and_get() cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits() cpufreq: armada-37xx: Fix module unloading cpufreq: armada-37xx: Remove cur_frequency variable cpufreq: armada-37xx: Fix determining base CPU frequency cpufreq: armada-37xx: Fix driver cleanup when registration failed clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz cpufreq: armada-37xx: Fix the AVS value for load L1 clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock cpufreq: armada-37xx: Fix setting TBG parent for load levels cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration cpuidle: tegra: Remove do_idle firmware call cpuidle: tegra: Fix C7 idling state on Tegra114 PM: sleep: fix typos in comments cpufreq: Remove unused for_each_policy macro ...

PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check

2021-04-21T17:03:37Z

Hibernation fails on a system in fips mode because md5 is used for the e820 integrity check and is not available. Use crc32 instead. The check is intended to detect whether the E820 memory map provided by the firmware after cold boot unexpectedly differs from the one that was in use when the hibernation image was created. In this case, the hibernation image cannot be restored, as it may cover memory regions that are no longer available to the OS. A non-cryptographic checksum such as CRC-32 is sufficient to detect such inadvertent deviations. Fixes: 62a03defeabd ("PM / hibernate: Verify the consistent of e820 memory map by md5 digest") Reviewed-by: Eric Biggers Tested-by: Dexuan Cui Reviewed-by: Dexuan Cui Signed-off-by: Chris von Recklinghausen [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki

x86: Fix various typos in comments, take #2

2021-03-21T22:50:28Z

Fix another ~42 single-word typos in arch/x86/ code comments, missed a few in the first pass, in particular in .S files. Signed-off-by: Ingo Molnar Cc: Borislav Petkov Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Paolo Bonzini Cc: Bjorn Helgaas Cc: linux-kernel@vger.kernel.org

x86/stackprotector/32: Make the canary into a regular percpu variable

2021-03-08T12:19:05Z

On 32-bit kernels, the stackprotector canary is quite nasty -- it is stored at %gs:(20), which is nasty because 32-bit kernels use %fs for percpu storage. It's even nastier because it means that whether %gs contains userspace state or kernel state while running kernel code depends on whether stackprotector is enabled (this is CONFIG_X86_32_LAZY_GS), and this setting radically changes the way that segment selectors work. Supporting both variants is a maintenance and testing mess. Merely rearranging so that percpu and the stack canary share the same segment would be messy as the 32-bit percpu address layout isn't currently compatible with putting a variable at a fixed offset. Fortunately, GCC 8.1 added options that allow the stack canary to be accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary percpu variable. This lets us get rid of all of the code to manage the stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess. (That name is special. We could use any symbol we want for the %fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any name other than __stack_chk_guard.) Forcibly disable stackprotector on older compilers that don't support the new options and turn the stack canary into a percpu variable. The "lazy GS" approach is now used for all 32-bit configurations. Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels, it loads the GS selector and updates the user GSBASE accordingly. (This is unchanged.) On 32-bit kernels, it loads the GS selector and updates GSBASE, which is now always the user base. This means that the overall effect is the same on 32-bit and 64-bit, which avoids some ifdeffery. [ bp: Massage commit message. ] Signed-off-by: Andy Lutomirski Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@kernel.org

Merge tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2021-02-23T23:13:45Z

Pull more clang LTO updates from Kees Cook: "Clang LTO x86 enablement. Full disclosure: while this has _not_ been in linux-next (since it initially looked like the objtool dependencies weren't going to make v5.12), it has been under daily build and runtime testing by Sami for quite some time. These x86 portions have been discussed on lkml, with Peter, Josh, and others helping nail things down. The bulk of the changes are to get objtool working happily. The rest of the x86 enablement is very small. Summary: - Generate __mcount_loc in objtool (Peter Zijlstra) - Support running objtool against vmlinux.o (Sami Tolvanen) - Clang LTO enablement for x86 (Sami Tolvanen)" Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/ Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/ * tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: lto: force rebuilds when switching CONFIG_LTO x86, build: allow LTO to be selected x86, cpu: disable LTO for cpu.c x86, vdso: disable LTO only for vDSO kbuild: lto: postpone objtool objtool: Split noinstr validation from --vmlinux x86, build: use objtool mcount tracing: add support for objtool mcount objtool: Don't autodetect vmlinux.o objtool: Fix __mcount_loc generation with Clang's assembler objtool: Add a pass for generating __mcount_loc

x86, cpu: disable LTO for cpu.c

2021-02-23T20:46:58Z

Clang incorrectly inlines functions with differing stack protector attributes, which breaks __restore_processor_state() that relies on stack protector being disabled. This change disables LTO for cpu.c to work aroung the bug. Link: https://bugs.llvm.org/show_bug.cgi?id=47479 Suggested-by: Nick Desaulniers Signed-off-by: Sami Tolvanen

x86/power: Support objtool validation in hibernate_asm_64.S

2021-01-26T17:33:04Z

The OBJECT_FILES_NON_STANDARD annotation is used to tell objtool to ignore a file. File-level ignores won't work when validating vmlinux.o. Instead, convert restore_image() and core_restore_code() to be ELF functions. Their code is conventional enough for objtool to be able to understand them. Cc: "Rafael J. Wysocki" Cc: Pavel Machek Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/974f8ceb5385e470f72e93974c70ab5c894bb0dc.1611263462.git.jpoimboe@redhat.com

x86/power: Move restore_registers() to top of the file

2021-01-26T17:33:04Z

Because restore_registers() is page-aligned, the assembler inexplicably adds an unreachable jump from after the end of the previous function to the beginning of restore_registers(). That confuses objtool, understandably. It also creates significant text fragmentation. As a result, most of the object file is wasted text (nops). Move restore_registers() to the beginning of the file to both prevent the text fragmentation and avoid the dead jump instruction. $ size /tmp/hibernate_asm_64.before.o /tmp/hibernate_asm_64.after.o text data bss dec hex filename 4415 0 0 4415 113f /tmp/hibernate_asm_64.before.o 524 0 0 524 20c /tmp/hibernate_asm_64.after.o Cc: "Rafael J. Wysocki" Cc: Pavel Machek Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/8c7f634201d26453d73fe55032cbbdc05d004387.1611263462.git.jpoimboe@redhat.com

x86/power: Annotate indirect branches as safe

2021-01-26T17:33:04Z

These indirect jumps are harmless; annotate them to make objtool's retpoline validation happy. Cc: "Rafael J. Wysocki" Cc: Pavel Machek Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/ba7a141c98f2c09c255b19bf78ee4a5f45d4ecb6.1611263462.git.jpoimboe@redhat.com